rendered paste body; Settings taken directly from intertel
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; DTMF digit duration / pause: 60ms
; E&M Answer recognition: 4500ms
; E&M Dial delay: 70ms
; E&M Dial delay hold: 140ms
; E&M Dialing Wait after hookflash: 140ms
; E&M Disconnect recognition: 1500ms
; E&M Handshake Timeout: 5000ms
; E&M Inpulse-dial Inter-digit Pause Recognition: 300 ms
; E&M Outpulse-dial Inter-digit pause: 700ms
; E&M Outpulse-dial Inter-pulse pause: 40ms
; E&M Disconnect flash duration: 15000ms
; E&M Post-Seize Delay: 65ms
; E&M Post-Signal Delay: 30ms
; E&M Pulse-hold: 60ms
; E&M Ready Timeout: 4000ms
; E&M Receive Handshake Delay: 20ms
; E&M Transmit Handshake Delay: 100ms
; E&M Seizure Debounce: 2ms
; E&M Off-hook Debounce: 10ms
; E&M On-hook Debounce: 10ms
; Asterisk's possible settings I haven't mapped yet
; prewink: Pre-wink time (default 50ms)
; preflash: Pre-flash time (default 50ms)
; Begin my guesses as to the mapping
; E&M Wink Hold: 250ms
; wink: Wink time (default 150ms)
wink=250
; E&M Wink Timeout: 350ms
; rxwink: Receiver wink time (default 300ms)
wink=350
; E&M Hookflash Recognition: 300ms
; rxflash: Receiver flashtime (default 1250ms)
rxflash=300
; E&M Hookflash Duration: 600ms
; flash: Flash time (default 750ms)
flash=600
; E&M False Signal Debounce: 50ms
; debounce: Debounce timing (default 600ms)
debounce=50
; E&M Wait for Dial Tone: 1000ms
; start: Start time (default 1500ms)
start=1000