Mine

SCSI subsystem initialized
libata version 1.20 loaded.
sata_sil 0000:03:05.0: version 0.9
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 17 (level, low) -> IRQ 177
sata_sil 0000:03:05.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xF881AC80 ctl 0xF881AC8A bmdma 0xF881AC00 irq 177
ata2: SATA max UDMA/100 cmd 0xF881ACC0 ctl 0xF881ACCA bmdma 0xF881AC08 irq 177
ata3: SATA max UDMA/100 cmd 0xF881AE80 ctl 0xF881AE8A bmdma 0xF881AE00 irq 177
ata4: SATA max UDMA/100 cmd 0xF881AEC0 ctl 0xF881AECA bmdma 0xF881AE08 irq 177
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil
ata3: SATA link down (SStatus 0)
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
Using cfq io scheduler
  Vendor: ATA       Model: WDC WD4000YR-01P  Rev: 01.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0