rendered paste body[4294696.153000] Linux video capture interface: v1.00
[4294696.209000] cx2388x v4l2 driver version 0.0.4 loaded
[4294696.212000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[4294696.212000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[4294696.212000] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
[4294696.372000] cx88[0]: hauppauge eeprom: model=90002, tuner=76
[4294696.400000] cx88[0]: registered IR remote control
[4294696.400000] cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xd0000000
[4294696.422000] cx88[0]/0: registered device video0 [v4l2]
[4294696.431000] cx88[0]/0: registered device vbi0
[4294696.591000] cx2388x dvb driver version 0.0.4 loaded
[4294696.594000] ACPI: PCI Interrupt 0000:02:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[4294696.594000] cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd1000000
[4294696.594000] cx88[0]/2: cx2388x based dvb card
[4294696.596000] DVB: registering new adapter (cx88[0]).
[4294696.596000] DVB: registering frontend 0 (Hauppauge Nova-T DVB-T)...
[4294696.672000] cx2388x blackbird driver version 0.0.4 loaded
[4294696.932000] ivtv: ==================== START INIT IVTV ====================
[4294696.932000] ivtv: version 0.4.0 (tagged release) loading
[4294696.932000] ivtv: Linux version: 2.6.12-9-386 386 gcc-3.4
[4294696.932000] ivtv: In case of problems please include the debug info
[4294696.932000] ivtv: between the START INIT IVTV and END INIT IVTV lines when
[4294696.932000] ivtv: mailing the ivtv-devel mailinglist.
[4294696.935000] ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
[4294696.936000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[4294696.936000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[4294696.936000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[4294696.940000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[4294696.945000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[4294696.945000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[4294696.984000] msp34xx: ivtv version
[4294696.984000] msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
[4294696.984000] msp34xx: $Id$ compiled on: Dec 1 2005 22:00:01
[4294697.318000] ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40]
[4294697.321000] saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[4294697.492000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
[4294697.551000] saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[4294697.553000] ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
[4294697.617000] tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2962152
[4294697.617000] tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
[4294697.617000] tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
[4294697.617000] tveeprom: audio_processor = CS5331 (type = 9)
[4294697.653000] tda9885/6/7: (ivtv) chip found @ 0x86
[4294697.653000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
[4294698.266000] ivtv0: loading /lib/modules/ivtv-fw-enc.bin
[4294698.282000] ivtv0: loading /lib/modules/ivtv-fw-dec.bin
[4294698.503000] ivtv0: Encoder revision: 0x02050032
[4294698.513000] ivtv0: Decoder revision: 0x02020023
[4294698.514000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[4294698.515000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
[4294698.516000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
[4294698.517000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[4294698.518000] ivtv0: Create encoder radio stream
[4294698.519000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
[4294698.520000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
[4294698.522000] ivtv0: Create decoder VOUT stream
[4294698.596000] ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
[4294698.617000] ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
[4294698.770000] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
[4294698.840000] tuner: pal= argument not recognised
[4294699.727000] ivtv0: Initialized WinTV PVR 350, card #0
[4294699.727000] ivtv: ==================== END INIT IVTV ====================
[4294699.781000] ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0)
[4294699.802000] ivtv0-osd warning: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes.
[4294699.852000] ivtv0-osd: screen coords: [0 0] -> [720 576]
[4294699.862000] ivtv0-osd: original global alpha = 208
[4294699.882000] ivtv0-osd: current OSD state = 39
[4294699.912000] ivtv0-osd: new global alpha = 208 (1 255 0)
[4294699.912000] ivtv0-osd: framebuffer at 0xd5510000, mapped to 0xfac10000, size 1620k
[4294699.912000] ivtv0-osd: mode is 720x576x32, linelength=2880
[4294700.010000] ivtv0-osd: fb1: iTVC15 TV out frame buffer device
[4294700.010000] ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
[4294700.110000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[4294700.110000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[4294700.110000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[4294700.218000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>