Something

Adding 1073984k swap on /dev/hda5.  Priority:-2 extents:1 across:1073984k
Shrinking memory... done (0 pages freed)
usbmouse 3-1:1.0: no suspend for driver usbmouse?
pnp: Device 00:01 disabled.
irq 11: nobody cared (try booting with the "irqpoll" option)
 <c013edfc> __report_bad_irq+0x1c/0x70  <c013eedb> note_interrupt+0x8b/0x200
 <f885861c> usb_hcd_irq+0x2c/0x60 [usbcore]  <c013e975> handle_IRQ_event+0x35/0x70
 <c013ea3c> __do_IRQ+0x8c/0xa0  <c01049ca> do_IRQ+0x1a/0x30
 <c0102f1a> common_interrupt+0x1a/0x20  <c011cc11> __do_softirq+0x31/0xa0
 <c011cca7> do_softirq+0x27/0x30  <c01049cf> do_IRQ+0x1f/0x30
 <c0102f1a> common_interrupt+0x1a/0x20  <c010c074> delay_pmtmr+0x14/0x20
 <f8f52187> snd_via82xx_channel_reset+0x17/0x40 [snd_via82xx_modem]  <f8f52515> snd_via82xx_suspend+0x95/0xa0 [snd_via82xx_modem]
 <c029c6bf> pci_device_suspend+0x1f/0x50  <c02f4d78> suspend_device+0xb8/0xe0
 <c02f4ed1> device_suspend+0xa1/0x19c  <c013cc57> pm_suspend_disk+0x17/0xce
 <c013071d> enter_state+0x11d/0x170  <c01307f3> state_store+0x83/0x90
 <c01988ab> sysfs_write_file+0x7b/0xf0  <c015d740> vfs_write+0xa0/0x160
 <c015e08d> sys_write+0x3d/0x70  <c0102c3b> sysenter_past_esp+0x54/0x79
handlers:
[<f88585f0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<f91fe850>] (radeon_driver_irq_handler+0x0/0xa0 [radeon])
Disabling IRQ #11
ACPI: PCI interrupt for device 0000:00:11.6 disabled
ACPI: PCI interrupt for device 0000:00:11.5 disabled
ACPI: PCI interrupt for device 0000:00:10.3 disabled
ACPI: PCI interrupt for device 0000:00:10.2 disabled
ACPI: PCI interrupt for device 0000:00:10.1 disabled
ACPI: PCI interrupt for device 0000:00:10.0 disabled
ACPI: PCI interrupt for device 0000:00:0b.0 disabled
swsusp: Need to copy 90043 pages
swsusp: critical section/: done (90043 pages copied)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 4100083, writing 4100087)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.6 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:01 activated.
pnp: Failed to activate device 00:07.
pnp: Failed to activate device 00:08.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
usbmouse 3-1:1.0: no resume for driver usbmouse?
swsusp: Not enough free swap
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R300 Microcode
Shrinking memory... done (0 pages freed)
usbmouse 3-1:1.0: no suspend for driver usbmouse?
pnp: Device 00:01 disabled.
ACPI: PCI interrupt for device 0000:00:11.6 disabled
ACPI: PCI interrupt for device 0000:00:11.5 disabled
ACPI: PCI interrupt for device 0000:00:10.3 disabled
ACPI: PCI interrupt for device 0000:00:10.2 disabled
ACPI: PCI interrupt for device 0000:00:10.1 disabled
ACPI: PCI interrupt for device 0000:00:10.0 disabled
ACPI: PCI interrupt for device 0000:00:0b.0 disabled
swsusp: Need to copy 90026 pages
swsusp: critical section/: done (90026 pages copied)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PM: Writing back config space on device 0000:00:0b.0 at offset 1 (was 4100083, writing 4100087)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.6 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:01 activated.
pnp: Failed to activate device 00:07.
pnp: Failed to activate device 00:08.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
usbmouse 3-1:1.0: no resume for driver usbmouse?
swsusp: Not enough free swap
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R300 Microcode