rendered paste body[root@localhost /]# dmesg
Linux version 2.6.9-1.6_FC2 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3
20040412 (Red Hat Linux 3.3.3-7)) #1 Thu Nov 18 22:03:19 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000001ffd000 (usable)
BIOS-e820: 0000000001ffd000 - 0000000001fff000 (ACPI data)
BIOS-e820: 0000000001fff000 - 0000000002000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
31MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 8189
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4093 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f7f30
ACPI: RSDT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd000
ACPI: FADT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd080
ACPI: BOOT (v001 ASUS P2Z-B 0x58582e31 ASUS 0x31303030) @ 0x01ffd040
ACPI: DSDT (v001 ASUS P2Z-B 0x00001000 MSFT 0x01000001) @ 0x00000000
ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable ACPIACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023e4000 soft=023e3000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 334.191 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 28484k/32756k available (2092k kernel code, 3840k reserved, 679k data, 148k init, 0k highmem)
Calibrating delay loop... 657.40 BogoMIPS (lpj=328704)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0183f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Mendocino) stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 203k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
PCI: IRQ 0 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmaskSimple Boot Flag at 0x46 set to 0x1
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1104048018.4294966362:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 5501D0A55CA2BC19
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 2 Plug & Play cards detected total
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 3M
agpgart: AGP aperture is 64M @ 0xe4000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: ST34311A, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 8452080 sectors (4327 MB) w/256KiB Cache, CHS=8944/15/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 128 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 585)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 296813
EXT3-fs: hda2: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 148k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
USB Universal Host Controller Interface driver v2.2
PCI: IRQ 0 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmaskPCI: Assigned IRQ 10 for device 0000:00:04.2
uhci_hcd 0000:00:04.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:04.2 to 64
uhci_hcd 0000:00:04.2: irq 10, io base 0000d400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Adding 192772k swap on /dev/hda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x4 to 0xa, date = 05051999
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
SCSI subsystem initialized
inserting floppy driver for 2.6.9-1.6_FC2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 0000:00:0b.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xb800, IRQ 12, 00:00:E8:8E:F0:C8.
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 5 for device 0000:00:0a.0
PCI: Setting latency timer of device 0000:00:0a.0 to 64
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
divert: allocating divert_blk for eth1
eth1: ADMtek Comet rev 17 at 0x481c000, 00:08:A1:55:B4:EF, IRQ 5.
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 0000:00:0b.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xb800, IRQ 12, 00:00:E8:8E:F0:C8.
ip_tables: (C) 2000-2002 Netfilter core team
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 5 for device 0000:00:0a.0
tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
divert: allocating divert_blk for eth1
eth1: ADMtek Comet rev 17 at 0x481c000, 00:08:A1:55:B4:EF, IRQ 5.
ip_tables: (C) 2000-2002 Netfilter core team
eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02376c20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth1: no IPv6 routers present
eth0: no IPv6 routers present
pnp: Device 00:01.00 activated.
divert: allocating divert_blk for eth2
eth2: 3c5x9 found at 0x220, 10baseT port, address 00 60 97 22 4e 33, IRQ 11.
3c509.c:1.19b 08Nov2002 becker@scyld.com
http://www.scyld.com/network/3c509.html
pnp: Device 00:02.00 activated.
divert: allocating divert_blk for eth3
eth3: 3c5x9 found at 0x230, 10baseT port, address 00 60 97 21 8c a0, IRQ 15.
3c509.c:1.19b 08Nov2002 becker@scyld.com
http://www.scyld.com/network/3c509.html