rendered paste bodyroot@2[hammer]# dmesg
[17179569.184000] Linux version 2.6.15-27-desktop (root@mepis-pro) (gcc version
4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue Jan 23 15:18:20 EST 2007
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001eee0000 (usable)
[17179569.184000] BIOS-e820: 000000001eee0000 - 000000001eeeb000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001eeeb000 - 000000001ef00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001ef00000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 494MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f63f0
[17179569.184000] On node 0 totalpages: 126688
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 122592 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x0
00f6420
[17179569.184000] ACPI: RSDT (v001 PTLTD Montara 0x06040000 LTP 0x00000000) @
0x1eee5e05
[17179569.184000] ACPI: FADT (v001 Acer Yuhina 0x06040000 PTL 0x00000001) @
0x1eeeaed2
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x1eeeafd8
[17179569.184000] ACPI: DSDT (v001 ANNI Yuhina 0x06040000 MSFT 0x0100000e) @
0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Intel MultiProcessor Specification v1.4
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] SMP mptable: bad signature [0x0]!
[17179569.184000] BIOS bug, MP table errors detected!...
[17179569.184000] ... disabling SMP support. (tell your hw vendor)
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:d
ec10000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 nomce quiet vga=791
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable
it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (013e0000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 2398.451 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour dummy device 80x25
[17179572.872000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes
)
[17179572.872000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.884000] Memory: 497552k/506752k available (2748k kernel code, 8728k re
served, 938k data, 192k init, 0k highmem)
[17179572.884000] Checking if this processor honours the WP bit even in supervis
or mode... Ok.
[17179572.964000] Calibrating delay using timer specific routine.. 4800.78 BogoM
IPS (lpj=9601576)
[17179572.964000] Security Framework v1.0.0 initialized
[17179572.964000] SELinux: Disabled at boot.
[17179572.964000] Capability LSM initialized
[17179572.964000] Mount-cache hash table entries: 512
[17179572.964000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000
00000000 00004400 00000000 00000000
[17179572.964000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 0
0000000 00004400 00000000 00000000
[17179572.964000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179572.964000] CPU: L2 cache: 128K
[17179572.964000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000008
0 00004400 00000000 00000000
[17179572.964000] mtrr: v2.0 (20020519)
[17179572.964000] CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[17179572.964000] Enabling fast FPU save and restore... done.
[17179572.964000] Enabling unmasked SIMD FPU exception support... done.
[17179572.964000] Checking 'hlt' instruction... OK.
[17179572.980000] ACPI: Looking for DSDT ... not found!
[17179572.980000] ACPI: setting ELCR to 0200 (from 0c30)
[17179572.992000] NET: Registered protocol family 16
[17179572.992000] ACPI: bus type pci registered
[17179572.992000] PCI: PCI BIOS revision 2.10 entry at 0xfd6b4, last bus=2
[17179572.992000] PCI: Using configuration type 1
[17179572.992000] ACPI: Subsystem revision 20051216
[17179572.996000] ACPI: Interpreter enabled
[17179572.996000] ACPI: Using PIC for interrupt routing
[17179572.996000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.996000] PCI: Probing PCI hardware (bus 00)
[17179573.000000] Boot video device is 0000:00:02.0
[17179573.000000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179573.000000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179573.000000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.000000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.000000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.008000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179573.008000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *5
[17179573.008000] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
[17179573.008000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *4
[17179573.008000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[17179573.012000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179573.012000] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[17179573.012000] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[17179573.012000] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[17179573.012000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[17179573.016000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.016000] pnp: PnP ACPI init
[17179573.220000] pnp: PnP ACPI: found 10 devices
[17179573.220000] PnPBIOS: Disabled by ACPI PNP
[17179573.220000] SCSI subsystem initialized
[17179573.220000] usbcore: registered new driver usbfs
[17179573.220000] usbcore: registered new driver hub
[17179573.220000] PCI: Using ACPI for IRQ routing
[17179573.220000] PCI: If a device doesn't work, try "pci=routeirq". If it help
s, post a report
[17179573.224000] pnp: 00:03: ioport range 0x600-0x60f has been reserved
[17179573.224000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179573.224000] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[17179573.224000] IO window: 00003400-000034ff
[17179573.224000] IO window: 00003800-000038ff
[17179573.224000] PREFETCH window: 30000000-31ffffff
[17179573.224000] MEM window: 36000000-37ffffff
[17179573.224000] PCI: Bus 7, cardbus bridge: 0000:02:04.1
[17179573.224000] IO window: 00003c00-00003cff
[17179573.224000] IO window: 00001400-000014ff
[17179573.224000] PREFETCH window: 32000000-33ffffff
[17179573.224000] MEM window: 38000000-39ffffff
[17179573.224000] PCI: Bridge: 0000:00:1e.0
[17179573.224000] IO window: 3000-3fff
[17179573.224000] MEM window: e0200000-e02fffff
[17179573.224000] PREFETCH window: 30000000-34ffffff
[17179573.224000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.224000] **** SET: Misaligned resource pointer: c15ed2c2 Type 07 Len 0
[17179573.224000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[17179573.224000] PCI: setting IRQ 10 as level-triggered
[17179573.224000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKF] -> GSI 10 (
level, low) -> IRQ 10
[17179573.228000] **** SET: Misaligned resource pointer: c15ed2c2 Type 07 Len 0
[17179573.228000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[17179573.228000] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17179573.228000] Simple Boot Flag at 0x3c set to 0x1
[17179573.228000] Machine check exception polling timer started.
[17179573.228000] audit: initializing netlink socket (disabled)
[17179573.228000] audit(1170080538.228:1): initialized
[17179573.228000] VFS: Disk quotas dquot_6.5.1
[17179573.228000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.228000] squashfs: version 3.1 (2006/08/15) Phillip Lougher
[17179573.228000] NTFS driver 2.1.25 [Flags: R/W].
[17179573.228000] JFS: nTxBlock = 3887, nTxLock = 31102
[17179573.232000] Registering unionfs 1.1.2
[17179573.232000] Initializing Cryptographic API
[17179573.232000] io scheduler noop registered
[17179573.232000] io scheduler anticipatory registered
[17179573.232000] io scheduler deadline registered
[17179573.232000] io scheduler cfq registered
[17179573.232000] vesafb: framebuffer at 0xe8000000, mapped to 0xdfa80000, using
3072k, total 16192k
[17179573.232000] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[17179573.232000] vesafb: protected mode interface info at 00ff:44f0
[17179573.232000] vesafb: scrolling: redraw
[17179573.232000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[17179573.232000] vesafb: Mode is VGA compatible
[17179573.300000] Console: switching to colour frame buffer device 128x48
[17179573.300000] fb0: VESA VGA frame buffer device
[17179573.300000] isapnp: Scanning for PnP cards...
[17179573.612000] isapnp: No Plug & Play device found
[17179573.660000] Non-volatile memory driver v1.2
[17179573.660000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[17179573.664000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.668000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.668000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.668000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.668000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.668000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.668000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar
ing enabled
[17179573.672000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.676000] **** SET: Misaligned resource pointer: c17238c2 Type 07 Len 0
[17179573.676000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[17179573.676000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (
level, low) -> IRQ 10
[17179573.676000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179573.680000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b
locksize
[17179573.680000] loop: loaded (max 8 devices)
[17179573.680000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.680000] ide: Assuming 33MHz system bus speed for PIO modes; override w
ith idebus=xx
[17179573.680000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179573.680000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179573.680000] **** SET: Misaligned resource pointer: c1732ec2 Type 07 Len 0
[17179573.680000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179573.680000] PCI: setting IRQ 11 as level-triggered
[17179573.680000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (
level, low) -> IRQ 11
[17179573.680000] ICH4: chipset revision 3
[17179573.680000] ICH4: not 100% native mode: will probe irqs later
[17179573.680000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb
:pio
[17179573.680000] ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd
:pio
[17179573.680000] Probing IDE interface ide0...
[17179573.968000] hda: TOSHIBA MK3018GAS, ATA DISK drive
[17179574.640000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.640000] Probing IDE interface ide1...
[17179575.376000] hdc: SR244W1, ATAPI CD/DVD-ROM drive
[17179575.712000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.712000] hda: max request size: 128KiB
[17179576.192000] hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
[17179576.192000] hda: cache flushes supported
[17179576.192000] hda: hda1 hda2 hda3
[17179576.228000] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
[17179576.228000] Uniform CD-ROM driver Revision: 3.20
[17179576.248000] ACPI: bus type scsi registered
[17179576.248000] libata version 1.20 loaded.
[17179576.248000] Driver 'sd' needs updating - please use bus_type methods
[17179576.248000] ieee1394: Initialized config rom entry `ip1394'
[17179576.248000] ieee1394: raw1394: /dev/raw1394 device initialized
[17179576.248000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179576.248000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1
)
[17179576.248000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179576.248000] usbmon: debugfs is not available
[17179576.248000] **** SET: Misaligned resource pointer: c17321c2 Type 07 Len 0
[17179576.248000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[17179576.248000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (
level, low) -> IRQ 10
[17179576.248000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.248000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.248000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.248000] PCI: cache line size of 128 is not supported by device 0000:00
:1d.7
[17179576.248000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus nu
mber 1
[17179576.248000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
[17179576.252000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 D
ec 2004
[17179576.252000] hub 1-0:1.0: USB hub found
[17179576.252000] hub 1-0:1.0: 6 ports detected
[17179576.528000] Initializing USB Mass Storage driver...
[17179576.880000] usbcore: registered new driver usb-storage
[17179576.880000] USB Mass Storage support registered.
[17179576.880000] mice: PS/2 mouse device common for all mice
[17179576.880000] NET: Registered protocol family 2
[17179576.916000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes
)
[17179576.916000] TCP established hash table entries: 16384 (order: 4, 65536 byt
es)
[17179576.916000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[17179576.916000] TCP: Hash tables configured (established 16384 bind 16384)
[17179576.916000] TCP reno registered
[17179576.916000] ip_tables: (C) 2000-2002 Netfilter core team
[17179576.952000] TCP bic registered
[17179576.952000] NET: Registered protocol family 1
[17179576.952000] NET: Registered protocol family 8
[17179576.952000] NET: Registered protocol family 20
[17179576.952000] Using IPI Shortcut mode
[17179576.952000] ACPI wakeup devices:
[17179576.952000] LID LANC MODM
[17179576.952000] ACPI: (supports S0 S3 S4 S5)
[17179577.044000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179577.060000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.060000] VFS: Mounted root (ext3 filesystem) readonly.
[17179577.060000] Freeing unused kernel memory: 192k freed
[17179577.060000] kjournald starting. Commit interval 5 seconds
[17179578.452000] EXT3 FS on hda1, internal journal
[17179584.792000] Adding 976552k swap on /dev/hda2. Priority:1 extents:1 across
:976552k
[17179586.032000] EXT3 FS on hda1, internal journal
[17179590.548000] USB Universal Host Controller Interface driver v2.3
[17179590.548000] **** SET: Misaligned resource pointer: c17c19c2 Type 07 Len 0
[17179590.548000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179590.548000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (
level, low) -> IRQ 11
[17179590.548000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179590.548000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179590.548000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus nu
mber 2
[17179590.548000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[17179590.548000] hub 2-0:1.0: USB hub found
[17179590.548000] hub 2-0:1.0: 2 ports detected
[17179590.664000] **** SET: Misaligned resource pointer: c17c16c2 Type 07 Len 0
[17179590.664000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179590.664000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (
level, low) -> IRQ 11
[17179590.664000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179590.664000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179590.664000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus nu
mber 3
[17179590.664000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[17179590.664000] hub 3-0:1.0: USB hub found
[17179590.664000] hub 3-0:1.0: 2 ports detected
[17179590.676000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.720000] agpgart: Detected an Intel 855 Chipset.
[17179590.720000] agpgart: Detected 16252K stolen memory.
[17179590.732000] agpgart: AGP aperture is 128M @ 0xe8000000
[17179590.772000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (
level, low) -> IRQ 11
[17179590.772000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179590.772000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179590.772000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus nu
mber 4
[17179590.772000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[17179590.772000] hub 4-0:1.0: USB hub found
[17179590.772000] hub 4-0:1.0: 2 ports detected
[17179591.020000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179591.024000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179591.116000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[17179591.208000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (
level, low) -> IRQ 10
[17179591.208000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[17179591.264000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (
level, low) -> IRQ 10
[17179591.264000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179591.300000] Floppy drive(s): fd0 is 1.44M
[17179591.316000] FDC 0 is a National Semiconductor PC87306
[17179591.952000] Real Time Clock Driver v1.12
[17179592.144000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x9
04713/0x4000
[17179592.184000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179592.280000] parport: PnPBIOS parport detected.
[17179592.280000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRIST
ATE,COMPAT,EPP,ECP,DMA]
[17179592.320000] 8139too Fast Ethernet driver 0.9.27
[17179592.388000] usbcore: registered new driver hiddev
[17179592.404000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[17179592.404000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] o
n usb-0000:00:1d.2-1
[17179592.404000] usbcore: registered new driver usbhid
[17179592.404000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179592.616000] intel8x0_measure_ac97_clock: measured 55280 usecs
[17179592.616000] intel8x0: clocking to 48000
[17179592.616000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKF] -> GSI 10 (
level, low) -> IRQ 10
[17179592.616000] Yenta: CardBus bridge found at 0000:02:04.0 [1025:0039]
[17179592.616000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179592.616000] Yenta: Routing CardBus interrupts to PCI
[17179592.616000] Yenta TI: socket 0000:02:04.0, mfunc 0x00921b22, devctl 0x64
[17179592.848000] Yenta: ISA IRQ mask 0x0038, PCI irq 10
[17179592.848000] Socket status: 30000006
[17179592.848000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 t
o #06
[17179592.848000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179592.848000] cs: IO port probe 0x3000-0x3fff: clean.
[17179592.848000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fff
ff
[17179592.848000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffff
ff
[17179593.108000] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17179593.108000] Yenta: CardBus bridge found at 0000:02:04.1 [1025:0039]
[17179593.108000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179593.108000] Yenta: Routing CardBus interrupts to PCI
[17179593.108000] Yenta TI: socket 0000:02:04.1, mfunc 0x00921b22, devctl 0x64
[17179593.340000] Yenta: ISA IRQ mask 0x0038, PCI irq 10
[17179593.340000] Socket status: 30000020
[17179593.340000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 t
o #0a
[17179593.340000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179593.340000] cs: IO port probe 0x3000-0x3fff: clean.
[17179593.340000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fff
ff
[17179593.340000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffff
ff
[17179593.612000] lp0: using parport0 (interrupt-driven).
[17179593.612000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKD] -> GSI 11 (
level, low) -> IRQ 11
[17179593.616000] eth0: RealTek RTL8139 at 0xdfa76000, 00:0a:e4:45:fc:c2, IRQ 11
[17179593.616000] eth0: Identified 8139 chip type 'RTL-8101'
[17179593.692000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179593.752000] cs: IO port probe 0x100-0x3af: clean.
[17179593.756000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179593.756000] cs: IO port probe 0x820-0x8ff: clean.
[17179593.756000] cs: IO port probe 0xc00-0xcf7: clean.
[17179593.756000] cs: IO port probe 0xa00-0xaff: clean.
[17179593.760000] cs: IO port probe 0x100-0x3af: clean.
[17179593.760000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179593.760000] cs: IO port probe 0x820-0x8ff: clean.
[17179593.764000] cs: IO port probe 0xc00-0xcf7: clean.
[17179593.764000] cs: IO port probe 0xa00-0xaff: clean.
[17179594.232000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179594.244000] pccard: CardBus card inserted into slot 1
[17179594.312000] Loaded prism54 driver, version 1.2
[17179594.312000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[17179594.312000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17179594.316000] eth1: uploading firmware...
[17179594.456000] eth1: firmware version: 1.0.4.3
[17179594.456000] eth1: firmware upload complete
[17179594.648000] eth1: resetting device...
[17179594.648000] eth1: uploading firmware...
[17179594.768000] eth1: firmware version: 1.0.4.3
[17179594.768000] eth1: firmware upload complete
[17179595.160000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179595.160000] md: bitmap version 4.39
[17179595.768000] eth1: no 'reset complete' IRQ seen - retrying
[17179595.864000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@
redhat.com
[17179596.768000] eth1: no 'reset complete' IRQ seen - retrying
[17179596.768000] eth1: interface reset failure
[17179596.768000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17179596.824000] eth1: resetting device...
[17179596.824000] eth1: uploading firmware...
[17179596.900000] NET: Registered protocol family 17
[17179596.912000] eth1: firmware version: 1.0.4.3
[17179596.912000] eth1: firmware upload complete
[17179597.140000] hdc: packet command error: status=0x51 { DriveReady SeekComple
te Error }
[17179597.140000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
[17179597.140000] ide: failed opcode was: unknown
[17179597.140000] cdrom: open failed.
[17179597.696000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179597.828000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation availa
ble
[17179597.876000] powernow: This module only works with AMD K7 CPUs
[17179597.912000] eth1: no 'reset complete' IRQ seen - retrying
[17179598.912000] eth1: no 'reset complete' IRQ seen - retrying
[17179598.912000] eth1: interface reset failure
[17179598.912000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17179599.248000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[17179599.424000] usbcore: registered new driver ndiswrapper
[17179601.732000] ACPI: AC Adapter [AC] (on-line)
[17179602.208000] ACPI: Battery Slot [BAT0] (battery present)
[17179602.416000] ACPI: Power Button (FF) [PWRF]
[17179602.416000] ACPI: Lid Switch [LID]
[17179602.416000] ACPI: Sleep Button (CM) [SLP2]
[17179602.760000] ibm_acpi: ec object not found
[17179602.796000] pcc_acpi: loading...
[17179602.928000] ACPI: Thermal Zone [THRS] (58 C)
[17179602.980000] ACPI: Thermal Zone [THRC] (53 C)
[17179603.048000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179611.368000] eth1: resetting device...
[17179611.368000] eth1: uploading firmware...
[17179611.488000] eth1: firmware version: 1.0.4.3
[17179611.488000] eth1: firmware upload complete
[17179612.488000] eth1: no 'reset complete' IRQ seen - retrying
[17179613.488000] eth1: no 'reset complete' IRQ seen - retrying
[17179613.488000] eth1: interface reset failure
[17179613.488000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17179614.776000] ppdev: user-space parallel port driver
[17179617.148000] Bluetooth: Core ver 2.8
[17179617.148000] NET: Registered protocol family 31
[17179617.148000] Bluetooth: HCI device and connection manager initialized
[17179617.148000] Bluetooth: HCI socket layer initialized
[17179617.240000] Bluetooth: L2CAP ver 2.8
[17179617.240000] Bluetooth: L2CAP socket layer initialized
[17179617.276000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179617.372000] Bluetooth: RFCOMM socket layer initialized
[17179617.372000] Bluetooth: RFCOMM TTY layer initialized
[17179617.372000] Bluetooth: RFCOMM ver 1.7
[17179617.652000] powernow: This module only works with AMD K7 CPUs
[17179621.272000] [drm] Initialized drm 1.0.1 20051102
[17179621.272000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (
level, low) -> IRQ 11
[17179621.272000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[17179621.272000] [drm] Initialized i915 1.4.0 20060119 on minor 1
[17179753.424000] usbcore: deregistering driver ndiswrapper
[17179767.412000] ieee80211_crypt: registered algorithm 'NULL'
[17179767.416000] ieee80211: 802.11 data/management/control stack, 1.1.13
[17179767.416000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno
@linux.intel.com>
[17180823.972000] eth1: removing device
[17180824.000000] ACPI: PCI interrupt for device 0000:07:00.0 disabled
[17180824.000000] Unloaded prism54 driver
[17180824.028000] Loaded prism54 driver, version 1.2
[17180824.028000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17180824.032000] eth1: uploading firmware...
[17180824.136000] eth1: firmware version: 1.0.4.3
[17180824.136000] eth1: firmware upload complete
[17180824.328000] eth1: resetting device...
[17180824.328000] eth1: uploading firmware...
[17180824.424000] eth1: firmware version: 1.0.4.3
[17180824.424000] eth1: firmware upload complete
[17180825.424000] eth1: no 'reset complete' IRQ seen - retrying
[17180826.424000] eth1: no 'reset complete' IRQ seen - retrying
[17180826.424000] eth1: interface reset failure
[17180826.424000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180826.524000] eth1: resetting device...
[17180826.524000] eth1: uploading firmware...
[17180826.628000] eth1: firmware version: 1.0.4.3
[17180826.628000] eth1: firmware upload complete
[17180827.628000] eth1: no 'reset complete' IRQ seen - retrying
[17180828.628000] eth1: no 'reset complete' IRQ seen - retrying
[17180828.628000] eth1: interface reset failure
[17180828.628000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180828.680000] eth1: resetting device...
[17180828.680000] eth1: uploading firmware...
[17180828.784000] eth1: firmware version: 1.0.4.3
[17180828.784000] eth1: firmware upload complete
[17180829.784000] eth1: no 'reset complete' IRQ seen - retrying
[17180830.784000] eth1: no 'reset complete' IRQ seen - retrying
[17180830.784000] eth1: interface reset failure
[17180830.784000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180945.024000] eth1: removing device
[17180945.060000] ACPI: PCI interrupt for device 0000:07:00.0 disabled
[17180945.060000] Unloaded prism54 driver
[17180945.076000] Loaded prism54 driver, version 1.2
[17180945.076000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17180945.080000] eth1: uploading firmware...
[17180945.220000] eth1: firmware version: 1.0.4.3
[17180945.220000] eth1: firmware upload complete
[17180945.356000] eth1: resetting device...
[17180945.356000] eth1: uploading firmware...
[17180945.464000] eth1: firmware version: 1.0.4.3
[17180945.464000] eth1: firmware upload complete
[17180946.464000] eth1: no 'reset complete' IRQ seen - retrying
[17180947.464000] eth1: no 'reset complete' IRQ seen - retrying
[17180947.464000] eth1: interface reset failure
[17180947.464000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180947.596000] eth1: resetting device...
[17180947.596000] eth1: uploading firmware...
[17180947.916000] eth1: firmware version: 1.0.4.3
[17180947.916000] eth1: firmware upload complete
[17180948.936000] eth1: no 'reset complete' IRQ seen - retrying
[17180949.936000] eth1: no 'reset complete' IRQ seen - retrying
[17180949.936000] eth1: interface reset failure
[17180949.936000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180949.988000] eth1: resetting device...
[17180949.988000] eth1: uploading firmware...
[17180950.088000] eth1: firmware version: 1.0.4.3
[17180950.088000] eth1: firmware upload complete
[17180951.088000] eth1: no 'reset complete' IRQ seen - retrying
[17180952.096000] eth1: no 'reset complete' IRQ seen - retrying
[17180952.096000] eth1: interface reset failure
[17180952.096000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180985.560000] eth1: resetting device...
[17180985.560000] eth1: uploading firmware...
[17180985.656000] eth1: firmware version: 1.0.4.3
[17180985.656000] eth1: firmware upload complete
[17180986.656000] eth1: no 'reset complete' IRQ seen - retrying
[17180987.656000] eth1: no 'reset complete' IRQ seen - retrying
[17180987.656000] eth1: interface reset failure
[17180987.656000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17180987.772000] eth1: resetting device...
[17180987.772000] eth1: uploading firmware...
[17180987.872000] eth1: firmware version: 1.0.4.3
[17180987.872000] eth1: firmware upload complete
[17180988.872000] eth1: no 'reset complete' IRQ seen - retrying
[17180989.872000] eth1: no 'reset complete' IRQ seen - retrying
[17180989.872000] eth1: interface reset failure
[17180989.872000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17181051.264000] eth1: resetting device...
[17181051.264000] eth1: uploading firmware...
[17181051.360000] eth1: firmware version: 1.0.4.3
[17181051.364000] eth1: firmware upload complete
[17181052.364000] eth1: no 'reset complete' IRQ seen - retrying
[17181053.364000] eth1: no 'reset complete' IRQ seen - retrying
[17181053.364000] eth1: interface reset failure
[17181053.364000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17181053.436000] eth1: resetting device...
[17181053.440000] eth1: uploading firmware...
[17181053.540000] eth1: firmware version: 1.0.4.3
[17181053.540000] eth1: firmware upload complete
[17181054.540000] eth1: no 'reset complete' IRQ seen - retrying
[17181055.540000] eth1: no 'reset complete' IRQ seen - retrying
[17181055.540000] eth1: interface reset failure
[17181055.540000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17181115.740000] eth1: removing device
[17181115.780000] ACPI: PCI interrupt for device 0000:07:00.0 disabled
[17181115.780000] Unloaded prism54 driver
[17181115.796000] Loaded prism54 driver, version 1.2
[17181115.796000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 10 (
level, low) -> IRQ 10
[17181115.796000] eth1: uploading firmware...
[17181115.916000] eth1: firmware version: 1.0.4.3
[17181115.916000] eth1: firmware upload complete
[17181116.064000] eth1: resetting device...
[17181116.064000] eth1: uploading firmware...
[17181116.180000] eth1: firmware version: 1.0.4.3
[17181116.184000] eth1: firmware upload complete
[17181117.184000] eth1: no 'reset complete' IRQ seen - retrying
[17181118.184000] eth1: no 'reset complete' IRQ seen - retrying
[17181118.184000] eth1: interface reset failure
[17181118.184000] prism54: Your card/socket may be faulty, or IRQ line too busy
:(
[17181118.304000] eth1: resetting device...
[17181118.304000] eth1: uploading firmware...
[17181118.396000] eth1: firmware version: 1.0.4.3
[17181118.396000] eth1: firmware upload complete
[17181119.396000] eth1: no 'reset complete' IRQ seen - retrying
[17181120.396000] eth1: no 'reset complete' IRQ seen - retrying
[17181120.396000] eth1: interface reset failure
[17181120.396000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
[17181120.448000] eth1: resetting device...
[17181120.448000] eth1: uploading firmware...
[17181120.540000] eth1: firmware version: 1.0.4.3
[17181120.540000] eth1: firmware upload complete
[17181121.540000] eth1: no 'reset complete' IRQ seen - retrying
[17181122.540000] eth1: no 'reset complete' IRQ seen - retrying
[17181122.540000] eth1: interface reset failure
[17181122.540000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
[17181551.732000] eth1: resetting device...
[17181551.732000] eth1: uploading firmware...
[17181551.844000] eth1: firmware version: 1.0.4.3
[17181551.844000] eth1: firmware upload complete
[17181552.844000] eth1: no 'reset complete' IRQ seen - retrying
[17181553.844000] eth1: no 'reset complete' IRQ seen - retrying
[17181553.844000] eth1: interface reset failure
[17181553.844000] prism54: Your card/socket may be faulty, or IRQ line too busy :(
root@2[hammer]#