rendered paste bodyroot@linuxserver:/home/ron# dmesg
[17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
[17179569.184000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000ca000 - 00000000000d0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
[17179569.184000] BIOS-e820: 000000001fee0000 - 000000001feed000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001feed000 - 000000001ff00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 510MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f7b40
[17179569.184000] On node 0 totalpages: 130784
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126688 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v002 PTLTD ) @ 0x000f7ba0
[17179569.184000] ACPI: XSDT (v001 PTLTD XSDT 0x06040001 LTP 0x00000000) @ 0x1fee894b
[17179569.184000] ACPI: FADT (v003 FSC 0x06040001 0x000f4240) @ 0x1fee8a0b
[17179569.184000] ACPI: ASF! (v016 OEMID OEMTBL 0x06040001 PTL 0x00000001) @ 0x1feeceb1
[17179569.184000] ACPI: MCFG (v001 PTLTD MCFG 0x06040001 LTP 0x00000000) @ 0x1feecf36
[17179569.184000] ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x1feecf76
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x1feecfd8
[17179569.184000] ACPI: DSDT (v001 FSC D2179 0x06040001 MSFT 0x02000002) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xf008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:6 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:6 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 3200.835 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.448000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.448000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.456000] Memory: 508892k/523136k available (1910k kernel code, 13628k reserved, 1069k data, 308k init, 0k highmem)
[17179572.456000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.536000] Calibrating delay using timer specific routine.. 6408.51 BogoMIPS (lpj=12817033)
[17179572.536000] Security Framework v1.0.0 initialized
[17179572.536000] SELinux: Disabled at boot.
[17179572.536000] Mount-cache hash table entries: 512
[17179572.536000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[17179572.536000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[17179572.536000] monitor/mwait feature present.
[17179572.536000] using mwait in idle threads.
[17179572.536000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.536000] CPU: L2 cache: 2048K
[17179572.536000] CPU: Hyper-Threading is disabled
[17179572.536000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e59d 00000000 00000001
[17179572.536000] Checking 'hlt' instruction... OK.
[17179572.552000] SMP alternatives: switching to UP code
[17179572.552000] checking if image is initramfs... it is
[17179572.948000] Freeing initrd memory: 5322k freed
[17179572.948000] ACPI: Core revision 20060707
[17179572.956000] ACPI: Looking for DSDT ... not found!
[17179572.960000] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
[17179572.960000] SMP alternatives: switching to SMP code
[17179572.960000] Booting processor 1/1 eip 3000
[17179572.968000] Initializing CPU#1
[17179573.052000] Calibrating delay using timer specific routine.. 6400.79 BogoMIPS (lpj=12801590)
[17179573.052000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[17179573.052000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001
[17179573.052000] monitor/mwait feature present.
[17179573.052000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179573.052000] CPU: L2 cache: 2048K
[17179573.052000] CPU: Hyper-Threading is disabled
[17179573.052000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e59d 00000000 00000001
[17179573.052000] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
[17179573.052000] Total of 2 processors activated (12809.31 BogoMIPS).
[17179573.052000] ENABLING IO-APIC IRQs
[17179573.052000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.196000] checking TSC synchronization across 2 CPUs: passed.
[17179573.200000] Brought up 2 CPUs
[17179573.264000] migration_cost=4000
[17179573.264000] NET: Registered protocol family 16
[17179573.264000] EISA bus registered
[17179573.264000] ACPI: bus type pci registered
[17179573.264000] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
[17179573.264000] PCI: Not using MMCONFIG.
[17179573.276000] PCI: PCI BIOS revision 2.10 entry at 0xfd8ad, last bus=11
[17179573.276000] PCI: Using configuration type 1
[17179573.276000] Setting up standard PCI resources
[17179573.288000] ACPI: Interpreter enabled
[17179573.288000] ACPI: Using IOAPIC for interrupt routing
[17179573.288000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.288000] PCI: Probing PCI hardware (bus 00)
[17179573.292000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.292000] Boot video device is 0000:0b:03.0
[17179573.292000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[17179573.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXF._PRT]
[17179573.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[17179573.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[17179573.296000] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
[17179573.296000] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
[17179573.296000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[17179573.296000] ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
[17179573.296000] ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
[17179573.296000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
[17179573.296000] ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
[17179573.296000] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
[17179573.300000] ACPI: Device [ECP] status [00000008]: functional but not present; setting present
[17179573.300000] ACPI: Device [COM2] status [00000008]: functional but not present; setting present
[17179573.300000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.300000] pnp: PnP ACPI init
[17179573.300000] pnp: PnP ACPI: found 14 devices
[17179573.300000] PnPBIOS: Disabled by ACPI PNP
[17179573.300000] PCI: Using ACPI for IRQ routing
[17179573.300000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.316000] pnp: 00:01: ioport range 0xcb0-0xcbb has been reserved
[17179573.316000] PCI: Bridge: 0000:00:1c.0
[17179573.316000] IO window: disabled.
[17179573.316000] MEM window: disabled.
[17179573.316000] PREFETCH window: disabled.
[17179573.316000] PCI: Bridge: 0000:00:1c.4
[17179573.316000] IO window: disabled.
[17179573.316000] MEM window: fc200000-fc2fffff
[17179573.316000] PREFETCH window: disabled.
[17179573.316000] PCI: Bridge: 0000:00:1c.5
[17179573.316000] IO window: disabled.
[17179573.316000] MEM window: disabled.
[17179573.316000] PREFETCH window: disabled.
[17179573.316000] PCI: Bridge: 0000:00:1e.0
[17179573.316000] IO window: 4000-4fff
[17179573.316000] MEM window: fc300000-fdffffff
[17179573.316000] PREFETCH window: fc000000-fc0fffff
[17179573.316000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179573.316000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.316000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
[17179573.316000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[17179573.316000] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177
[17179573.316000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[17179573.316000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.316000] NET: Registered protocol family 2
[17179573.356000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.356000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179573.356000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179573.356000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.356000] TCP reno registered
[17179573.356000] Simple Boot Flag at 0x69 set to 0x1
[17179573.356000] audit: initializing netlink socket (disabled)
[17179573.356000] audit(1170025557.356:1): initialized
[17179573.356000] VFS: Disk quotas dquot_6.5.1
[17179573.356000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.356000] Initializing Cryptographic API
[17179573.356000] io scheduler noop registered
[17179573.356000] io scheduler anticipatory registered
[17179573.356000] io scheduler deadline registered
[17179573.356000] io scheduler cfq registered (default)
[17179581.364000] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179581.368000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179581.368000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179581.368000] assign_interrupt_mode Found MSI capability
[17179581.368000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179581.368000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179581.368000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
[17179581.368000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[17179581.368000] assign_interrupt_mode Found MSI capability
[17179581.368000] Allocate Port Service[0000:00:1c.4:pcie00]
[17179581.368000] Allocate Port Service[0000:00:1c.4:pcie02]
[17179581.368000] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177
[17179581.368000] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[17179581.368000] assign_interrupt_mode Found MSI capability
[17179581.368000] Allocate Port Service[0000:00:1c.5:pcie00]
[17179581.368000] Allocate Port Service[0000:00:1c.5:pcie02]
[17179581.368000] isapnp: Scanning for PnP cards...
[17179581.720000] isapnp: No Plug & Play device found
[17179581.744000] Real Time Clock Driver v1.12ac
[17179581.744000] hpet_acpi_add: no address or irqs in _CRS
[17179581.744000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179581.744000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.744000] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.744000] mice: PS/2 mouse device common for all mice
[17179581.744000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179581.744000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179581.744000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179581.744000] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179581.748000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179581.748000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179581.748000] EISA: Probing bus 0 at eisa.0
[17179581.748000] Cannot allocate resource for EISA slot 2
[17179581.748000] Cannot allocate resource for EISA slot 3
[17179581.748000] Cannot allocate resource for EISA slot 4
[17179581.748000] EISA: Detected 0 cards.
[17179581.748000] TCP bic registered
[17179581.748000] NET: Registered protocol family 1
[17179581.748000] NET: Registered protocol family 8
[17179581.748000] NET: Registered protocol family 20
[17179581.748000] Starting balanced_irq
[17179581.748000] Using IPI No-Shortcut mode
[17179581.748000] ACPI: (supports S0 S1 S4 S5)
[17179581.748000] Freeing unused kernel memory: 308k freed
[17179581.776000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179582.812000] Capability LSM initialized
[17179582.840000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.840000] ACPI: Getting cpuindex for acpiid 0x2
[17179582.840000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.840000] ACPI: Getting cpuindex for acpiid 0x3
[17179583.156000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179583.156000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
[17179583.156000] ICH7: chipset revision 1
[17179583.156000] ICH7: not 100% native mode: will probe irqs later
[17179583.156000] ide0: BM-DMA at 0x3420-0x3427, BIOS settings: hda:DMA, hdb:pio
[17179583.156000] ide1: BM-DMA at 0x3428-0x342f, BIOS settings: hdc:pio, hdd:pio
[17179583.156000] Probing IDE interface ide0...
[17179583.896000] hda: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[17179584.236000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179584.236000] Probing IDE interface ide1...
[17179584.812000] hda: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
[17179584.812000] Uniform CD-ROM driver Revision: 3.20
[17179584.880000] SCSI subsystem initialized
[17179584.884000] libata version 1.20 loaded.
[17179584.884000] ahci 0000:00:1f.2: version 1.2
[17179584.884000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
[17179590.708000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179590.708000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[17179590.708000] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[17179590.708000] ata1: SATA max UDMA/133 cmd 0xE083C500 ctl 0x0 bmdma 0x0 irq 233
[17179590.708000] ata2: SATA max UDMA/133 cmd 0xE083C580 ctl 0x0 bmdma 0x0 irq 233
[17179590.708000] ata3: SATA max UDMA/133 cmd 0xE083C600 ctl 0x0 bmdma 0x0 irq 233
[17179590.708000] ata4: SATA max UDMA/133 cmd 0xE083C680 ctl 0x0 bmdma 0x0 irq 233
[17179591.084000] ata1: SATA link up 3.0 Gbps (SStatus 123)
[17179591.092000] ata1: dev 0 cfg 49:2f00 82:7469 83:7f01 84:4023 85:7449 86:be01 87:4023 88:40ff
[17179591.092000] ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
[17179591.128000] ata1: dev 0 configured for UDMA/133
[17179591.128000] scsi0 : ahci
[17179591.332000] ata2: SATA link down (SStatus 0)
[17179591.332000] scsi1 : ahci
[17179591.536000] ata3: SATA link down (SStatus 0)
[17179591.536000] scsi2 : ahci
[17179591.740000] ata4: SATA link down (SStatus 0)
[17179591.740000] scsi3 : ahci
[17179591.740000] Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
[17179591.740000] Type: Direct-Access ANSI SCSI revision: 05
[17179591.748000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179591.748000] sda: Write Protect is off
[17179591.748000] sda: Mode Sense: 00 3a 00 00
[17179591.748000] SCSI device sda: drive cache: write through
[17179591.748000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179591.748000] sda: Write Protect is off
[17179591.748000] sda: Mode Sense: 00 3a 00 00
[17179591.748000] SCSI device sda: drive cache: write through
[17179591.748000] sda: sda1 sda2 < sda5 >
[17179591.780000] sd 0:0:0:0: Attached scsi disk sda
[17179591.968000] usbcore: registered new driver usbfs
[17179591.968000] usbcore: registered new driver hub
[17179591.968000] USB Universal Host Controller Interface driver v3.0
[17179591.968000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
[17179591.968000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179591.968000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179591.968000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179591.968000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00002000
[17179591.968000] usb usb1: configuration #1 chosen from 1 choice
[17179591.972000] hub 1-0:1.0: USB hub found
[17179591.972000] hub 1-0:1.0: 2 ports detected
[17179591.996000] Probing IDE interface ide1...
[17179592.076000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 58
[17179592.076000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179592.076000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179592.076000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179592.076000] uhci_hcd 0000:00:1d.1: irq 58, io base 0x00002400
[17179592.080000] usb usb2: configuration #1 chosen from 1 choice
[17179592.080000] hub 2-0:1.0: USB hub found
[17179592.080000] hub 2-0:1.0: 2 ports detected
[17179592.184000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 66
[17179592.184000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179592.184000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179592.184000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179592.184000] uhci_hcd 0000:00:1d.2: irq 66, io base 0x00002800
[17179592.188000] usb usb3: configuration #1 chosen from 1 choice
[17179592.188000] hub 3-0:1.0: USB hub found
[17179592.188000] hub 3-0:1.0: 2 ports detected
[17179592.292000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 74
[17179592.292000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179592.292000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179592.292000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179592.292000] uhci_hcd 0000:00:1d.3: irq 74, io base 0x00002c00
[17179592.292000] usb usb4: configuration #1 chosen from 1 choice
[17179592.296000] hub 4-0:1.0: USB hub found
[17179592.296000] hub 4-0:1.0: 2 ports detected
[17179592.400000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
[17179592.400000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179592.400000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179592.404000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179592.404000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179592.404000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xfc100000
[17179592.408000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179592.408000] usb usb5: configuration #1 chosen from 1 choice
[17179592.408000] hub 5-0:1.0: USB hub found
[17179592.408000] hub 5-0:1.0: 8 ports detected
[17179592.584000] Attempting manual resume
[17179592.592000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179592.592000] EXT3-fs: write access will be enabled during recovery.
[17179592.752000] usb 5-5: new high speed USB device using ehci_hcd and address 2
[17179595.868000] usb 5-5: device descriptor read/64, error -110
[17179597.096000] kjournald starting. Commit interval 5 seconds
[17179597.096000] EXT3-fs: sda1: orphan cleanup on readonly fs
[17179597.096000] ext3_orphan_cleanup: deleting unreferenced inode 17564320
[17179597.120000] ext3_orphan_cleanup: deleting unreferenced inode 17530902
[17179597.124000] EXT3-fs: sda1: 2 orphan inodes deleted
[17179597.124000] EXT3-fs: recovery complete.
[17179597.316000] EXT3-fs: mounted filesystem with ordered data mode.
[17179605.144000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179605.148000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179605.272000] hw_random: RNG not detected
[17179605.368000] tg3.c:v3.59.1 (August 25, 2006)
[17179605.368000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179605.368000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[17179605.460000] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:05:ca:77:d5
[17179605.460000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[17179605.460000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[17179605.624000] input: PC Speaker as /class/input/input1
[17179605.676000] Floppy drive(s): fd0 is 1.44M
[17179605.696000] FDC 0 is a post-1991 82077
[17179605.768000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179605.884000] parport: PnPBIOS parport detected.
[17179605.884000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[17179606.260000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179606.272000] ts: Compaq touchscreen protocol output
[17179606.460000] lp0: using parport0 (interrupt-driven).
[17179606.484000] Adding 1502036k swap on /dev/disk/by-uuid/d839862c-f315-4fdc-b7f3-8c5265c74a01. Priority:-1 extents:1 across:1502036k
[17179606.544000] EXT3 FS on sda1, internal journal
[17179607.456000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17179607.456000] tg3: eth0: Flow control is on for TX and on for RX.
[17179607.844000] NET: Registered protocol family 17
[17179608.060000] NET: Registered protocol family 10
[17179608.060000] lo: Disabled Privacy Extensions
[17179608.060000] IPv6 over IPv4 tunneling driver
[17179611.084000] usb 5-5: device descriptor read/64, error -110
[17179611.300000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[17179612.044000] ACPI: Power Button (FF) [PWRF]
[17179612.044000] ACPI: Power Button (CM) [PWRB]
[17179612.164000] ibm_acpi: ec object not found
[17179612.204000] pcc_acpi: loading...
[17179614.412000] usb 5-5: device descriptor read/64, error -110
[17179615.396000] apm: BIOS not found.
[17179618.548000] Bluetooth: Core ver 2.8
[17179618.548000] NET: Registered protocol family 31
[17179618.548000] Bluetooth: HCI device and connection manager initialized
[17179618.548000] Bluetooth: HCI socket layer initialized
[17179618.660000] eth0: no IPv6 routers present
[17179618.684000] Bluetooth: L2CAP ver 2.8
[17179618.684000] Bluetooth: L2CAP socket layer initialized
[17179629.628000] usb 5-5: device descriptor read/64, error -110
[17179629.844000] usb 5-5: new high speed USB device using ehci_hcd and address 4
[17179634.864000] usb 5-5: device descriptor read/8, error -110
[17179639.984000] usb 5-5: device descriptor read/8, error -110
[17179640.200000] usb 5-5: new high speed USB device using ehci_hcd and address 5
[17179645.220000] usb 5-5: device descriptor read/8, error -110
[17179650.340000] usb 5-5: device descriptor read/8, error -110
[17179650.616000] Bluetooth: RFCOMM socket layer initialized
[17179650.616000] Bluetooth: RFCOMM TTY layer initialized
[17179650.616000] Bluetooth: RFCOMM ver 1.7
[17179911.288000] usb 5-5: new high speed USB device using ehci_hcd and address 6
[17179911.424000] usb 5-5: configuration #1 chosen from 1 choice
[17179911.584000] dib0700: loaded with support for 2 different device-types
[17179911.584000] dvb-usb: found a 'DiBcom STK7700P reference design' in cold state, will try to load a firmware
[17179911.636000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
[17179911.816000] dib0700: firmware started successfully.
[17179912.320000] dvb-usb: found a 'DiBcom STK7700P reference design' in warm state.
[17179912.320000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[17179912.324000] DVB: registering new adapter (DiBcom STK7700P reference design).
[17179967.516000] dvb-usb: no frontend was attached by 'DiBcom STK7700P reference design'
[17179967.516000] dvb-usb: DiBcom STK7700P reference design successfully initialized and connected.
[17179967.516000] usbcore: registered new driver dvb_usb_dib0700
root@linuxserver:/home/ron# uname -a
Linux linuxserver 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 UTC 2006 i686 GNU/Linux
root@linuxserver:/home/ron#