Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (854.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 515878912 (491 MB)
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD HWPC20A> on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ - AE_AML_INVALID_RESOURCE_TYPE
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1208-0x120b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xfb001000-0xfb0010ff irq 16 at device 2.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:08:a1:7e:5b:5a
rl1: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem 0xfb001400-0xfb0014ff irq 17 at device 3.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:08:a1:7e:90:05
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1c00-0x1c3f mem 0xfb002000-0xfb002fff,0xfb100000-0xfb1fffff irq 18 at device 4.0 on pci0
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus2
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:6e:07:d3:9e
pci0: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1040-0x104f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c40-0x1c4f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib1
ed0: <RealTek 8029> port 0x2c00-0x2c1f irq 20 at device 2.0 on pci3
ed0: Ethernet address: 00:60:52:0a:8f:0e
ed0: type RTL8029 (16 bit)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci3
pci4: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.53> mem 0xfd400000-0xfd7fffff irq 21 at device 3.1 on pci3
amr0: <Series 466> Firmware F.02.05, BIOS B.02.03, 16MB RAM
sym0: <896> port 0x2400-0x24ff mem 0xfd002000-0xfd0023ff,0xfd000000-0xfd001fff irq 24 at device 6.0 on pci3
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [GIANT-LOCKED]
sym1: <896> port 0x2800-0x28ff mem 0xfd002400-0xfd0027ff,0xfd004000-0xfd005fff irq 25 at device 6.1 on pci3
sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 854854385 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <LTN486S/YKS4> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 17354MB (35540992 sectors) RAID 5 (optimal)
Trying to mount root from ufs:/dev/amrd0s1a
repo# dmesg raid