rendered paste bodydge [PCI0] (0000:00)
[4294670.686000] PCI: Probing PCI hardware (bus 00)
[4294670.686000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294670.686000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.698000] Boot video device is 0000:01:00.0
[4294670.699000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.719000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[4294670.744000] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 15)
[4294670.745000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[4294670.746000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[4294670.747000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[4294670.748000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[4294670.749000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[4294670.750000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[4294670.751000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[4294670.751000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.751000] pnp: PnP ACPI init
[4294670.781000] pnp: PnP ACPI: found 11 devices
[4294670.781000] PnPBIOS: Disabled by ACPI PNP
[4294670.781000] PCI: Using ACPI for IRQ routing
[4294670.781000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.798000] pnp: 00:0a: ioport range 0x800-0x85f could not be reserved
[4294670.798000] pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved
[4294670.798000] pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved
[4294670.798000] Simple Boot Flag at 0x7d set to 0x1
[4294670.799000] audit: initializing netlink socket (disabled)
[4294670.799000] audit: initialized
[4294670.799000] VFS: Disk quotas dquot_6.5.1
[4294670.799000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.799000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294670.799000] devfs: boot_options: 0x0
[4294670.799000] Initializing Cryptographic API
[4294670.799000] isapnp: Scanning for PnP cards...
[4294671.153000] isapnp: No Plug & Play device found
[4294671.191000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[4294671.193000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.193000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.193000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.193000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.196000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.197000] io scheduler noop registered
[4294671.197000] io scheduler anticipatory registered
[4294671.197000] io scheduler deadline registered
[4294671.197000] io scheduler cfq registered
[4294671.197000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.198000] NET: Registered protocol family 2
[4294671.207000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294671.207000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[4294671.207000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294671.207000] TCP: Hash tables configured (established 32768 bind 32768)
[4294671.207000] NET: Registered protocol family 8
[4294671.207000] NET: Registered protocol family 20
[4294671.208000] ACPI wakeup devices:
[4294671.208000] VBTN PCI0 USB0 USB1 PCI1 KBD
[4294671.208000] ACPI: (supports S0 S1 S3 S4 S5)
[4294671.208000] Freeing unused kernel memory: 168k freed
[4294671.252000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294671.269000] Capability LSM initialized
[4294671.293000] NET: Registered protocol family 1
[4294671.317000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.317000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.317000] ACPI: bus type ide registered
[4294671.334000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[4294671.334000] ICH2: chipset revision 2
[4294671.334000] ICH2: not 100% native mode: will probe irqs later
[4294671.334000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[4294671.334000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[4294671.334000] Probing IDE interface ide0...
[4294671.598000] hda: Maxtor 6Y080L0, ATA DISK drive
[4294672.210000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.210000] Probing IDE interface ide1...
[4294672.882000] hdc: CI-BDV316E, ATAPI CD/DVD-ROM drive
[4294673.290000] hdd: CD ROM CI-BCDF565E, ATAPI CD/DVD-ROM drive
[4294673.341000] ide1 at 0x170-0x177,0x376 on irq 15
[4294673.341000] Probing IDE interface ide2...
[4294673.854000] Probing IDE interface ide3...
[4294674.366000] Probing IDE interface ide4...
[4294674.878000] Probing IDE interface ide5...
[4294675.397000] hda: max request size: 128KiB
[4294675.401000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[4294675.401000] hda: cache flushes supported
[4294675.402000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
[4294675.427000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[4294675.427000] Uniform CD-ROM driver Revision: 3.20
[4294675.430000] hdd: ATAPI 52X CD-ROM drive, 128kB Cache
[4294676.282000] Attempting manual resume
[4294676.282000] swsusp: Suspend partition has wrong signature?
[4294676.367000] usbcore: registered new driver usbfs
[4294676.367000] usbcore: registered new driver hub
[4294676.368000] USB Universal Host Controller Interface driver v2.2
[4294676.369000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294676.369000] PCI: setting IRQ 11 as level-triggered
[4294676.369000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294676.369000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294676.369000] uhci_hcd 0000:00:1f.2: Intel Corporation 82801BA/BAM USB (Hub #1)
[4294676.431000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294676.431000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
[4294676.431000] hub 1-0:1.0: USB hub found
[4294676.431000] hub 1-0:1.0: 2 ports detected
[4294676.434000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[4294676.434000] PCI: setting IRQ 9 as level-triggered
[4294676.434000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[4294676.434000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[4294676.434000] uhci_hcd 0000:00:1f.4: Intel Corporation 82801BA/BAM USB (Hub #2)
[4294676.496000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[4294676.496000] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ff60
[4294676.496000] hub 2-0:1.0: USB hub found
[4294676.496000] hub 2-0:1.0: 2 ports detected
[4294676.609000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[4294676.609000] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294676.609000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[4294676.609000] 0000:02:0c.0: 3Com PCI 3c905C Tornado at 0xe880. Vers LK1.1.19
[4294679.525000] ACPI: CPU0 (power states: C1[C1])
[4294679.659000] Attempting manual resume
[4294679.659000] swsusp: Suspend partition has wrong signature?
[4294679.670000] ReiserFS: hda4: found reiserfs format "3.6" with standard journal
[4294684.411000] ReiserFS: hda4: using ordered data mode
[4294684.427000] ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294684.428000] ReiserFS: hda4: checking transaction log (hda4)
[4294684.473000] ReiserFS: hda4: replayed 7 transactions in 0 seconds
[4294684.546000] ReiserFS: hda4: Using r5 hash to sort names
[4294686.244000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294690.643000] Adding 979956k swap on /dev/hda3. Priority:-1 extents:1
[4294693.484000] ReiserFS: hda4: Removing [257 84648 0x0 SD]..done
[4294693.485000] ReiserFS: hda4: There were 1 uncompleted unlinks/truncates. Completed
[4294700.042000] parport: PnPBIOS parport detected.
[4294700.042000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[4294700.134000] lp0: using parport0 (interrupt-driven).
[4294700.204000] mice: PS/2 mouse device common for all mice
[4294700.570000] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
[4294700.790000] ts: Compaq touchscreen protocol output
[4294702.542000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294703.211000] cdrom: open failed.
[4294703.213000] cdrom: open failed.
[4294704.779000] kjournald starting. Commit interval 5 seconds
[4294704.779000] EXT3 FS on hda1, internal journal
[4294704.779000] EXT3-fs: mounted filesystem with ordered data mode.
[4294704.826000] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[4294705.031000] ReiserFS: hda2: using ordered data mode
[4294705.046000] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294705.047000] ReiserFS: hda2: checking transaction log (hda2)
[4294705.063000] ReiserFS: hda2: Using r5 hash to sort names
[4294705.804000] Linux agpgart interface v0.101 (c) Dave Jones
[4294705.819000] agpgart: Detected an Intel i850 Chipset.
[4294705.843000] agpgart: AGP aperture is 128M @ 0xd8000000
[4294706.009000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294706.018000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294706.018000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294706.182000] hw_random hardware driver 1.0.0 loaded
[4294706.273000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294706.273000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294707.230000] Zapata Telephony Interface Registered on major 196
[4294707.274000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[4294707.274000] PCI: setting IRQ 10 as level-triggered
[4294707.274000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[4294707.347000] wcfxo: DAA mode is 'FCC'
[4294707.347000] Found a Wildcard FXO: Wildcard X101P
[4294707.862000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294710.817000] gameport: CS46xx Gameport is pci0000:02:09.0/gameport0, speed 1084kHz
[4294711.481000] Linux video capture interface: v1.00
[4294711.515000] ivtv: ==================== START INIT IVTV ====================
[4294711.515000] ivtv: version 0.4.0 (tagged release) loading
[4294711.515000] ivtv: Linux version: 2.6.12-9-686 686 gcc-3.4
[4294711.515000] ivtv: In case of problems please include the debug info
[4294711.515000] ivtv: between the START INIT IVTV and END INIT IVTV lines when
[4294711.515000] ivtv: mailing the ivtv-devel mailinglist.
[4294711.522000] ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based)
[4294711.522000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294711.655000] tveeprom: ivtv version
[4294711.655000] tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7367869
[4294711.655000] tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
[4294711.655000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
[4294711.655000] tveeprom: audio processor = MSP3445 (type = c)
[4294711.655000] tveeprom: decoder processor = SAA7115 (type = 13)
[4294711.655000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[4294711.707000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[4294711.707000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[4294711.778000] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[4294711.962000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
[4294712.031000] msp34xx: ivtv version
[4294712.031000] msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
[4294712.031000] msp34xx: $Id$ compiled on: Nov 24 2005 22:21:32
[4294712.369000] ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]
[4294713.051000] ivtv0: loading /lib/modules/ivtv-fw-enc.bin
[4294713.279000] ivtv0: Encoder revision: 0x02050032
[4294713.281000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[4294713.306000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[4294713.322000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[4294713.334000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[4294713.334000] tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
[4294714.280000] ivtv0: Initialized WinTV PVR 250, card #0
[4294714.280000] ivtv: ====================== NEXT CARD ======================
[4294714.280000] ivtv1: Autodetected WinTV PVR 250 card (iTVC16 based)
[4294714.281000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
[4294714.281000] PCI: setting IRQ 3 as level-triggered
[4294714.281000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ 3
[4294714.351000] tveeprom: ivtv version
[4294714.351000] tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 2851987
[4294714.351000] tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
[4294714.351000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
[4294714.351000] tveeprom: audio processor = MSP3445 (type = c)
[4294714.351000] tveeprom: decoder processor = SAA7115 (type = 13)
[4294714.351000] ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
[4294714.355000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
[4294714.355000] ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
[4294714.379000] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
[4294714.563000] ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21]
[4294714.586000] msp34xx: ivtv version
[4294714.586000] msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
[4294714.586000] msp34xx: $Id$ compiled on: Nov 24 2005 22:21:32
[4294714.925000] ivtv1: i2c attach to card #1 ok [client=MSP3445G-B8, addr=40]
[4294715.668000] ivtv1: loading /lib/modules/ivtv-fw-enc.bin
[4294715.883000] ivtv1: Encoder revision: 0x02050032
[4294715.885000] ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[4294715.887000] ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[4294715.890000] ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[4294715.892000] ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[4294715.893000] tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #1
[4294716.839000] ivtv1: Initialized WinTV PVR 250, card #1
[4294716.839000] ivtv: ==================== END INIT IVTV ====================
[4294718.420000] input: PC Speaker
[4294718.538000] Real Time Clock Driver v1.12
[4294718.582000] Floppy drive(s): fd0 is 1.44M
[4294718.613000] FDC 0 is a National Semiconductor PC87306
[4294719.630000] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[4294721.661000] NET: Registered protocol family 10
[4294721.661000] Disabled Privacy Extensions on device c031eb40(lo)
[4294721.661000] IPv6 over IPv4 tunneling driver
[4294723.363000] ACPI: Power Button (FF) [PWRF]
[4294723.363000] ACPI: Power Button (CM) [VBTN]
[4294723.482000] ibm_acpi: ec object not found
[4294724.070000] capifs: Rev 1.1.2.3
[4294731.889000] eth0: no IPv6 routers present