rendered paste body%% Generated by KWord. Don't modify this file but the file *.kwd.
%% Send an email to rjacolin@ifrance.com for bugs, wishes, .... Thank you.
%% Compile this file with : lambda filename.tex
%% a dvi file will be generated.
%% Use odvips to convert it and to see it with gv
%% The file uses the latex style (not the kword style).
\ocp\TexUTF=inutf8
\InputTranslation currentfile \TexUTF
\documentclass[a4paper, 12pt]{article}
% Package(s) to include
\usepackage{omega}
\usepackage[a4paper]{geometry}
\usepackage{textcomp}
%%%%%%%%%%%%%%%%%% END OF PREAMBLE %%%%%%%%%%%%%%%%%%
\pagestyle{empty}
\begin{document}
\begin{flushleft}
oot@darkstar:~# lsusb
Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse
Optical
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 055d:b230 Samsung Electro-Mechanics Co.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
root@darkstar:~#
root@darkstar:~# lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
DRAM Controller/Host-Hub Interface (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE
Chipset Integrated Graphics Device (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L)
LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
01:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX
(rev 10)
01:0a.0 Communication controller: Agere Systems LT WinModem (rev
02)
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
root@darkstar:~# dmesg
Linux version 2.6.14 (root@darkstar) (gcc version 3.3.6) #1 Sun
Nov 20 04:20:29 CST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
503MB LOWMEM available.
On node 0 totalpages: 129008
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 124912 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.4 present.
Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Slack_2.6.14 ro root=342
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2700.371 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 507492k/516032k available (2498k kernel code, 8052k reserved,
727k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using timer specific routine.. 5407.96 BogoMIPS
(lpj=10815939)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
00004400 00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) CPU 2.70GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=1
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1d.0 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 5 for device 0000:00:1d.0
PCI: Sharing IRQ 5 with 0000:00:02.0
PCI: IRQ 0 for device 0000:00:1d.1 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1d.1
PCI: IRQ 0 for device 0000:00:1d.2 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: IRQ 0 for device 0000:00:1d.7 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1d.7
PCI: Sharing IRQ 10 with 0000:01:0c.0
PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 3 for device 0000:00:1f.3
PCI: Sharing IRQ 3 with 0000:00:1f.5
PCI: IRQ 0 for device 0000:01:0a.0 doesn't match PIRQ mask -
try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:01:0a.0
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: 20000000-200fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
Floppy drive(s): fd0 is 360K PC
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD800BB-60JKC0, ATA DISK drive
hdb: ST340015A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: SONY CD-RW CRX215E5, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes supported
hda: hda1
hdb: max request size: 128KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hdb: cache flushes supported
hdb: hdb1 < hdb5 > hdb2
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3500.000 MB/sec
raid5: using function: pIII_sse (3500.000 MB/sec)
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
padlock: VIA PadLock not detected.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211_crypt: registered algorithm 'NULL'
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k freed
Adding 1950408k swap on /dev/hdb5. Priority:-1 extents:1 across:1950408k
EXT3 FS on hdb2, internal journal
NTFS driver 2.1.24 [Flags: R/O MODULE].
NTFS volume version 3.1.
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:01:09.0
eth0: RealTek RTL8139 at 0xe01fa000, 00:10:b5:64:12:47, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
PCI: Found IRQ 10 for device 0000:01:0c.0
PCI: Sharing IRQ 10 with 0000:00:1d.7
eth1: RealTek RTL8139 at 0xe01fc000, 00:0c:76:dd:aa:4a, IRQ 10
eth1: Identified 8139 chip type 'RTL-8101'
PCI: Found IRQ 3 for device 0000:00:1f.5
PCI: Sharing IRQ 3 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 53661 usecs
intel8x0: clocking to 48000
i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
hw_random: RNG not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Found IRQ 10 for device 0000:00:1d.7
PCI: Sharing IRQ 10 with 0000:01:0c.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number
1
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xee080000
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver
10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 5 for device 0000:00:1d.0
PCI: Sharing IRQ 5 with 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number
2
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number
3
uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000d000
usb 2-1: new full speed USB device using uhci_hcd and address
2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number
4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000d400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using uhci_hcd and address
2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®]
on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse
driver
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
hw_random: RNG not detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
root@darkstar:~#
\end{flushleft}
\end{document}