rendered paste bodyLinux version 2.6.19 (root@chema) (gcc versión 3.4.6) #7 SMP Sun Dec 31 20:08:05
CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5650
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 Nvidia ) @ 0x000f76c0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x3fff9500
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9600
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9440
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Detected 2010.314 MHz processor.
Built 1 zonelists. Total pages: 260081
Kernel command line: auto BOOT_IMAGE=Slack ro root=301
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032120k/1048512k available (3342k kernel code, 15812k reserved, 1520k d
ata, 280k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0653000 - 0xc0699000 ( 280 kB)
.data : 0xc0443b9f - 0xc05bfd8c (1520 kB)
.text : 0xc0100000 - 0xc0443b9f (3342 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4023.11 BogoMIPS (lpj=8046224)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001
00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 0000000
0 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 980 Objects with 86 Devices 310 Methods 37 Regions
ACPI Namespace successfully loaded at root c06fbaf0
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Total of 1 processors activated (4023.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 371k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:18
Setting up standard PCI resources
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0951 [04] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs
in this block
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs
in this block
Completing Region/Field/Buffer/Package initialization:..........................
................................................................................
...........................................
Initialized 37/37 Regions 9/9 Fields 35/35 Buffers 68/77 Packages (989 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 1 _STA executions (examined 91 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [10de/005e] 000580 00
PCI: Calling quirk c0237f7e for 0000:00:00.0
PCI: Calling quirk c03b810e for 0000:00:00.0
PCI: Calling quirk c03b8423 for 0000:00:00.0
PCI: Found 0000:00:01.0 [10de/0050] 000601 00
PCI: Calling quirk c0237f7e for 0000:00:01.0
PCI: Calling quirk c03b810e for 0000:00:01.0
PCI: Calling quirk c03b8423 for 0000:00:01.0
PCI: Found 0000:00:01.1 [10de/0052] 000c05 00
PCI: Calling quirk c0237f7e for 0000:00:01.1
PCI: Calling quirk c03b810e for 0000:00:01.1
PCI: Calling quirk c03b8423 for 0000:00:01.1
PCI: Found 0000:00:02.0 [10de/005a] 000c03 00
PCI: Calling quirk c0237f7e for 0000:00:02.0
PCI: Calling quirk c03b810e for 0000:00:02.0
PCI: Calling quirk c03b8423 for 0000:00:02.0
PCI: Found 0000:00:02.1 [10de/005b] 000c03 00
PCI: Calling quirk c0237f7e for 0000:00:02.1
PCI: Calling quirk c03b810e for 0000:00:02.1
PCI: Calling quirk c03b8423 for 0000:00:02.1
PCI: Found 0000:00:04.0 [10de/0059] 000401 00
PCI: Calling quirk c0237f7e for 0000:00:04.0
PCI: Calling quirk c03b810e for 0000:00:04.0
PCI: Calling quirk c03b8423 for 0000:00:04.0
PCI: Found 0000:00:06.0 [10de/0053] 000101 00
PCI: Calling quirk c0237f7e for 0000:00:06.0
PCI: Calling quirk c03b810e for 0000:00:06.0
PCI: Calling quirk c03b8423 for 0000:00:06.0
PCI: Found 0000:00:07.0 [10de/0054] 000101 00
PCI: Calling quirk c0237f7e for 0000:00:07.0
PCI: Calling quirk c03b810e for 0000:00:07.0
PCI: Calling quirk c03b8423 for 0000:00:07.0
PCI: Found 0000:00:08.0 [10de/0055] 000101 00
PCI: Calling quirk c0237f7e for 0000:00:08.0
PCI: Calling quirk c03b810e for 0000:00:08.0
PCI: Calling quirk c03b8423 for 0000:00:08.0
PCI: Found 0000:00:09.0 [10de/005c] 000604 01
PCI: Calling quirk c0237f7e for 0000:00:09.0
PCI: Calling quirk c03b810e for 0000:00:09.0
PCI: Calling quirk c03b8423 for 0000:00:09.0
PCI: Found 0000:00:0a.0 [10de/0057] 000680 00
PCI: Calling quirk c0237f7e for 0000:00:0a.0
PCI: Calling quirk c03b810e for 0000:00:0a.0
PCI: Calling quirk c03b8423 for 0000:00:0a.0
PCI: Found 0000:00:0b.0 [10de/005d] 000604 01
PCI: Calling quirk c0237f7e for 0000:00:0b.0
PCI: Calling quirk c03b810e for 0000:00:0b.0
PCI: Calling quirk c03b8423 for 0000:00:0b.0
PCI: Found 0000:00:0c.0 [10de/005d] 000604 01
PCI: Calling quirk c0237f7e for 0000:00:0c.0
PCI: Calling quirk c03b810e for 0000:00:0c.0
PCI: Calling quirk c03b8423 for 0000:00:0c.0
PCI: Found 0000:00:0d.0 [10de/005d] 000604 01
PCI: Calling quirk c0237f7e for 0000:00:0d.0
PCI: Calling quirk c03b810e for 0000:00:0d.0
PCI: Calling quirk c03b8423 for 0000:00:0d.0
PCI: Found 0000:00:0e.0 [10de/005d] 000604 01
PCI: Calling quirk c0237f7e for 0000:00:0e.0
PCI: Calling quirk c03b810e for 0000:00:0e.0
PCI: Calling quirk c03b8423 for 0000:00:0e.0
PCI: Found 0000:00:18.0 [1022/1100] 000600 00
PCI: Calling quirk c0237f7e for 0000:00:18.0
PCI: Calling quirk c03b810e for 0000:00:18.0
PCI: Calling quirk c03b8423 for 0000:00:18.0
PCI: Found 0000:00:18.1 [1022/1101] 000600 00
PCI: Calling quirk c0237f7e for 0000:00:18.1
PCI: Calling quirk c03b810e for 0000:00:18.1
PCI: Calling quirk c03b8423 for 0000:00:18.1
PCI: Found 0000:00:18.2 [1022/1102] 000600 00
PCI: Calling quirk c0237f7e for 0000:00:18.2
PCI: Calling quirk c03b810e for 0000:00:18.2
PCI: Calling quirk c03b8423 for 0000:00:18.2
PCI: Found 0000:00:18.3 [1022/1103] 000600 00
PCI: Calling quirk c0237f7e for 0000:00:18.3
PCI: Calling quirk c03b810e for 0000:00:18.3
PCI: Calling quirk c03b8423 for 0000:00:18.3
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:09.0, config 050500, pass 0
PCI: Scanning bus 0000:05
PCI: Found 0000:05:06.0 [1131/7133] 000480 00
PCI: Calling quirk c0237f7e for 0000:05:06.0
PCI: Calling quirk c03b810e for 0000:05:06.0
PCI: Calling quirk c03b8423 for 0000:05:06.0
PCI: Fixups for bus 0000:05
PCI: Transparent bridge - 0000:00:09.0
PCI: Bus scan for 0000:05 returning with max=05
PCI: Scanning behind PCI bridge 0000:00:0b.0, config 040400, pass 0
PCI: Scanning bus 0000:04
PCI: Fixups for bus 0000:04
PCI: Bus scan for 0000:04 returning with max=04
PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 0
PCI: Scanning bus 0000:03
PCI: Fixups for bus 0000:03
PCI: Bus scan for 0000:03 returning with max=03
PCI: Scanning behind PCI bridge 0000:00:0d.0, config 020200, pass 0
PCI: Scanning bus 0000:02
PCI: Fixups for bus 0000:02
PCI: Bus scan for 0000:02 returning with max=02
PCI: Scanning behind PCI bridge 0000:00:0e.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [1002/5b60] 000300 00
PCI: Calling quirk c0237f7e for 0000:01:00.0
PCI: Calling quirk c03b810e for 0000:01:00.0
PCI: Calling quirk c03b8423 for 0000:01:00.0
Boot video device is 0000:01:00.0
PCI: Found 0000:01:00.1 [1002/5b70] 000380 00
PCI: Calling quirk c0237f7e for 0000:01:00.1
PCI: Calling quirk c03b810e for 0000:01:00.1
PCI: Calling quirk c03b8423 for 0000:01:00.1
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:09.0, config 050500, pass 1
PCI: Scanning behind PCI bridge 0000:00:0b.0, config 040400, pass 1
PCI: Scanning behind PCI bridge 0000:00:0c.0, config 030300, pass 1
PCI: Scanning behind PCI bridge 0000:00:0d.0, config 020200, pass 1
PCI: Scanning behind PCI bridge 0000:00:0e.0, config 010100, pass 1
PCI: Bus scan for 0000:00 returning with max=05
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: da000000-da0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
got res [d8000000:d801ffff] bus [d8000000:d801ffff] flags 7202 for BAR 6 of 00
00:01:00.0
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: d8000000-d9ffffff
PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Calling quirk c0237e9c for 0000:00:00.0
PCI: Calling quirk c038faa7 for 0000:00:00.0
PCI: Calling quirk c0237e9c for 0000:00:01.0
PCI: Calling quirk c038faa7 for 0000:00:01.0
PCI: Calling quirk c0237e9c for 0000:00:01.1
PCI: Calling quirk c038faa7 for 0000:00:01.1
PCI: Calling quirk c0237e9c for 0000:00:02.0
PCI: Calling quirk c038faa7 for 0000:00:02.0
PCI: Calling quirk c0237e9c for 0000:00:02.1
PCI: Calling quirk c038faa7 for 0000:00:02.1
PCI: Calling quirk c0237e9c for 0000:00:04.0
PCI: Calling quirk c038faa7 for 0000:00:04.0
PCI: Calling quirk c0237e9c for 0000:00:06.0
PCI: Calling quirk c038faa7 for 0000:00:06.0
PCI: Calling quirk c0237e9c for 0000:00:07.0
PCI: Calling quirk c038faa7 for 0000:00:07.0
PCI: Calling quirk c0237e9c for 0000:00:08.0
PCI: Calling quirk c038faa7 for 0000:00:08.0
PCI: Calling quirk c0237e9c for 0000:00:09.0
PCI: Calling quirk c038faa7 for 0000:00:09.0
PCI: Calling quirk c0237e9c for 0000:00:0a.0
PCI: Calling quirk c038faa7 for 0000:00:0a.0
PCI: Calling quirk c0237e9c for 0000:00:0b.0
PCI: Calling quirk c023871c for 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Calling quirk c023889a for 0000:00:0b.0
PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Calling quirk c038faa7 for 0000:00:0b.0
PCI: Calling quirk c0237e9c for 0000:00:0c.0
PCI: Calling quirk c023871c for 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Calling quirk c023889a for 0000:00:0c.0
PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Calling quirk c038faa7 for 0000:00:0c.0
PCI: Calling quirk c0237e9c for 0000:00:0d.0
PCI: Calling quirk c023871c for 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Calling quirk c023889a for 0000:00:0d.0
PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Calling quirk c038faa7 for 0000:00:0d.0
PCI: Calling quirk c0237e9c for 0000:00:0e.0
PCI: Calling quirk c023871c for 0000:00:0e.0
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Calling quirk c023889a for 0000:00:0e.0
PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Calling quirk c038faa7 for 0000:00:0e.0
PCI: Calling quirk c0237e9c for 0000:00:18.0
PCI: Calling quirk c038faa7 for 0000:00:18.0
PCI: Calling quirk c0237e9c for 0000:00:18.1
PCI: Calling quirk c038faa7 for 0000:00:18.1
PCI: Calling quirk c0237e9c for 0000:00:18.2
PCI: Calling quirk c038faa7 for 0000:00:18.2
PCI: Calling quirk c0237e9c for 0000:00:18.3
PCI: Calling quirk c038faa7 for 0000:00:18.3
PCI: Calling quirk c0237e9c for 0000:05:06.0
PCI: Calling quirk c038faa7 for 0000:05:06.0
PCI: Calling quirk c0237e9c for 0000:01:00.0
PCI: Calling quirk c038faa7 for 0000:01:00.0
PCI: Calling quirk c0237e9c for 0000:01:00.1
PCI: Calling quirk c038faa7 for 0000:01:00.1
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 1638
4k
vesafb: mode is 1024x768x8, linelength=1024, pages=20
vesafb: protected mode interface info at c000:59c8
vesafb: pmi: set display start = c00c5a5c, set palette = c00c5aa8
vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 sec
onds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ
16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST3200822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ
17
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 17
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 17
scsi0 : sata_nv
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ
18
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 18
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 18
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ
19
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ
16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 16, io mem 0xda104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Genius Wireless Optical Pro as /class/input/input0
input: USB HID v1.00 Mouse [Genius Wireless Optical Pro] on usb-0000:00:02.0-1
input: USB-compliant keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-2
input: USB-compliant keyboard as /class/input/input2
input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.
00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain
information. Assuming no coordination
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
JFS: nTxBlock = 8068, nTxLock = 64544
UDF-fs: No VRS found
VFS: Mounted root (jfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 280k freed
Adding 538168k swap on /dev/hda3. Priority:-1 extents:1 across:538168k
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Linux video capture interface: v2.00
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ
17
PCI: Setting latency timer of device 0000:00:04.0 to 64
saa7130/34: v4l2 driver version 0.2.14 loaded
intel8x0_measure_ac97_clock: measured 54650 usecs
intel8x0: clocking to 46983
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ
20
saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000
000
saa7133[0]: subsystem: 4e42:3306, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 210000
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
eth0: no IPv6 routers present
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000
000
saa7133[0]: subsystem: 4e42:3306, board: Philips Tiger reference design [card=81
,insmod option]
saa7133[0]: board init: gpio is 210000
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: booting from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: firmware upload failed
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000
000
saa7133[0]: subsystem: 4e42:3306, board: LifeView FlyDVB-T / Genius VideoWonder
DVB-T [card=86,insmod option]
saa7133[0]: board init: gpio is 10000
input: saa7134 IR (LifeView FlyDVB-T / as /class/input/input3
tuner 2-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
tuner 2-004b: tuner type not set
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000
000
saa7133[0]: subsystem: 4e42:3306, board: Tevion/KWorld DVB-T 220RF [card=88,insm
od option]
saa7133[0]: board init: gpio is 10000
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:05:06.0, rev: 208, irq: 20, latency: 32, mmio: 0xda000 000
saa7133[0]: subsystem: 4e42:3306, board: Philips Tiger reference design [card=81 ,insmod option]
saa7133[0]: board init: gpio is 10000
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 0 -- invalid
tda1004x: booting from eeprom
tda1004x: found firmware revision ff -- invalid
tda1004x: firmware upload failed