Someone
public text v1 · immutable+Ethernet eth0: MAC address 00:50:fc:02:03:04
IP: 192.168.12.142/255.255.240.0, Gateway: 192.168.12.14
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - built 21:05:24, Oct 17 2005
Platform: PC (I386)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.R1
RAM: 0x00000000-0x000f0000, 0x00070470-0x000a0000 available
linux -b 0x400000 -l 0x0009c2d4 -s 0x001017da -c "console=ttyS0,38400"
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> IP: 192.168.12.142/255.255.240.0, Gateway: 192.168.12.14
Default server: 192.168.12.148
RedBoot>
mem_size: 1000000
initrd ede000 len 1017da
Linux version 2.4.25-386 (root@Fedora) (gcc version 3.3.1) #1455 Thu Aug 31 15:6
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000001000000 (usable)
16MB LOWMEM available.
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: console=ttyS0,38400
No local APIC present or hardware disabled
Initializing CPU#0
Calibrating delay loop... 50.79 BogoMIPS
Memory: 13312k/16384k available (954k kernel code, 2684k reserved, 222k data, 8)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
CPU: Cyrix Cx486SLC
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
LED & GPIO & LAN Status Driver LED_VERSION
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed
ttyS00 at 0x03f8 (irq = 4) is a 16550A
HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
N_HDLC line discipline registered.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
r6040: RDC R6040 net driver, version 0.8 (28March2005)
r6040: RDC R6040 net driver, version 0.8 (28March2005)
r6040: RDC R6040 net driver, version 0.8 (28March2005)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MX29LV320B flash device: 200000 at ffe00000
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 1 MTD partitions on "MX29LV320B flash device":
0x00000000-0x001f0000 : "Flash Disk 1"
MX29LV320B flash device initialized
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.2.3: Stephen Frost <sfrost@snowman.net>. http://snowman.net/proj/
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
aaaaaaaaaaa
bbbbbbbbbbb
RAMDISK: LZMA image found at block 0
RAMDISK: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=4194304
................................................................
LZMA initrd loaded successfully
Freeing initrd memory: 1029k freed
VFS: Mounted root (ext2 filesystem).
dddddddddd
Freeing unused kernel memory: 84k freed
run_init_process:/sbin/init, env PATH=/bin:/usr/bin:/sbin
insmod: islp
Please press Enter to activate this console. Sat Jan 1 00:00:00 UTC 2000
R6040 phyAddr=5, Link at Full duplex
R6040 phyAddr=4, Link at Full duplex
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
Initialize WLAN interface
Using /bin/rt61ap.o
insmod: init_module: rt61ap: No such device
SIOCGIFFLAGS: No such device
ra0 no private ioctls.
ifconfig: ra0: error fetching interface information: Device not found
SIGSEGV
ra0 no private ioctls.
ra0 no private ioctls.
Setup BRIDGE interface
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
device eth0 entered promiscuous mode
R6040 phyAddr=5, Link at Full duplex
SIOCDELRT: No such process
interface ra0 does not exist!
SIOCSIFADDR: No such device
SIOCDELRT: No such device
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
SIOCDELRT: No such process
SIOCDELRT: No such process
^C^C^CStatic DHCP Leases disable!
^CSIOCDELRT: No such process
udhcpd (v0.9.9-pre) started
max_leases value (254) not sane, setting to 101 instead
Setup WAN interface
^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^*
^C^Csetting: port: 31727
running in daemon mode
********** run GaTest **********
udhcp client (v0.9.9-pre) started
rm: cannot remove `/tmp/agentenabledflag': No such file or directory