rendered paste bodyOn node 0 totalpages: 196608
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 192512 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 40000000 (gap: 30000000:cffc0000)
Detected 1260.084 MHz processor.
Built 1 zonelists. Total pages: 196608
Kernel command line: ro root=LABEL=/ rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0160f000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ae000 soft=c078e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773032k/786432k available (2139k kernel code, 12732k reserved, 866k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2520.67 BogoMIPS (lpj=1260337)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383f1ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: AMD Duron(tm) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1392 bytes
checking if image is initramfs... it is
Freeing initrd memory: 1353k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Uncovering SIS18 that hid as a SIS503 (compatible=0)
Boot video device is 0000:01:00.0
PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:09.0
PCI: Sharing IRQ 11 with 0000:00:09.2
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:02.0
IO window: a000-bfff
MEM window: dbe00000-dbefffff
PREFETCH window: cbc00000-dbcfffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1167323384.634:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 172537CBFDBE1E47
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 730 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS730 ATA 100 (1st gen) controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hdb: MAXTOR 6L020J1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdb: max request size: 128KiB
hdb: 40132503 sectors (20547 MB) w/1818KiB Cache, CHS=42468/15/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 671 not supported
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 386k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:01.2
PCI: Sharing IRQ 5 with 0000:00:01.3
ohci_hcd 0000:00:01.2: OHCI Host Controller
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.2: irq 5, io mem 0xdfffc000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Found IRQ 5 for device 0000:00:01.3
PCI: Sharing IRQ 5 with 0000:00:01.2
ohci_hcd 0000:00:01.3: OHCI Host Controller
ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.3: irq 5, io mem 0xdfffd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1167323390.588:2): selinux=0 auid=4294967295
input: PC Speaker as /class/input/input0
sis900.c: v1.08.10 Apr. 2 2006
PCI: setting IRQ 12 as level-triggered
PCI: Found IRQ 12 for device 0000:00:01.1
0000:00:01.1: VIA 6103 PHY transceiver found at address 1.
0000:00:01.1: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 12, 00:0a:e6:cc:37:6e.
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:09.0
PCI: Sharing IRQ 11 with 0000:00:09.2
CORE cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx2388x dvb driver version 0.0.6 loaded
cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 11, latency: 64, mmio: 0x40000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
PCI: Found IRQ 11 for device 0000:00:09.2
PCI: Sharing IRQ 11 with 0000:00:09.0
cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 11, latency: 64, mmio: 0xdc000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
cx2388x blackbird driver version 0.0.6 loaded
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:01.4
AC'97 1 does not respond - RESET
AC'97 1 access error (not audio or modem codec)
SI7018: the secondary codec - invalid access
gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed 2130kHz
ac97 codec read TIMEOUT [0x5a/0x1000c05a]!!!
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try using pci=biosirq.
[drm] Initialized radeon 1.25.0 20060524 on minor 0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.4 loaded
EXT3 FS on hdb1, internal journal
Adding 1052248k swap on /dev/hdb2. Priority:-1 extents:1 across:1052248k
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs
[root@localhost scan]#