rendered paste body_es1938_interrupt+0x0/0x117
[<c0130d31>] request_irq+0x75/0x8c
[<c0310aba>] snd_es1938_create+0x104/0x18b
[<c0310b41>] snd_es1938_interrupt+0x0/0x117
[<c0310d70>] snd_es1938_probe+0x9a/0x1e3
[<c021b1d6>] __pci_device_probe+0x30/0x43
[<c021b208>] pci_device_probe+0x1f/0x34
[<c028cb61>] driver_probe_device+0x53/0xac
[<c028cc1a>] __driver_attach+0x0/0x36
[<c028cc3e>] __driver_attach+0x24/0x36
[<c028c379>] bus_for_each_dev+0x47/0x6d
[<c02114ad>] kobject_add+0x91/0xb0
[<c028cc64>] driver_attach+0x14/0x18
[<c028cc1a>] __driver_attach+0x0/0x36
[<c028c786>] bus_add_driver+0x66/0xa8
[<c028cfa3>] driver_register+0x26/0x29
[<c021b3d5>] pci_register_driver+0x64/0x72
[<c0536080>] alsa_card_es1938_init+0xa/0xc
[<c051a6f9>] do_initcalls+0x4b/0x99
[<c010027e>] init+0x0/0xd6
[<c01002aa>] init+0x2c/0xd6
[<c01012d5>] kernel_thread_helper+0x5/0xb
handlers:
[<c0310b41>] (snd_es1938_interrupt+0x0/0x117)
Disabling IRQ #5
CLASS: registering class device: ID = 'midiC0D0'
class_hotplug - name = midiC0D0
CLASS: registering class device: ID = 'midi'
class_hotplug - name = midi
CLASS: registering class device: ID = 'dmmidi'
class_hotplug - name = dmmidi
CLASS: registering class device: ID = 'hwC0D0'
class_hotplug - name = hwC0D0
CLASS: registering class device: ID = 'dmfm'
class_hotplug - name = dmfm
CLASS: registering class device: ID = 'pcmC0D0p'
class_hotplug - name = pcmC0D0p
CLASS: registering class device: ID = 'pcmC0D0c'
class_hotplug - name = pcmC0D0c
CLASS: registering class device: ID = 'dsp'
class_hotplug - name = dsp
CLASS: registering class device: ID = 'audio'
class_hotplug - name = audio
CLASS: registering class device: ID = 'controlC0'
class_hotplug - name = controlC0
CLASS: registering class device: ID = 'mixer'
class_hotplug - name = mixer
bound device '0000:00:0c.0' to driver 'ESS ES1938 (Solo-1)'
pci: Bound Device 0000:00:0c.0 to Driver ESS ES1938 (Solo-1)
ALSA device list:
#0: ESS ES1938 (Solo-1) rev 0, irq 5
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
Using IPI Shortcut mode
Registering sysdev class '<NULL>'
Registering sys device 'acpi0'
ACPI wakeup devices:
PCI0 S595 USB0
ACPI: (supports S0 S1 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 268k freed
kjournald starting. Commit interval 5 seconds
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
CLASS: Unregistering class device. ID = 'vcs1'
class_hotplug - name = vcs1
device class 'vcs1': release.
CLASS: Unregistering class device. ID = 'vcsa1'
class_hotplug - name = vcsa1
device class 'vcsa1': release.
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
CLASS: Unregistering class device. ID = 'vcs1'
class_hotplug - name = vcs1
device class 'vcs1': release.
CLASS: Unregistering class device. ID = 'vcsa1'
class_hotplug - name = vcsa1
device class 'vcsa1': release.
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
CLASS: Unregistering class device. ID = 'vcs1'
class_hotplug - name = vcs1
NET: Registered protocol family 1
device class 'vcs1': release.
CLASS: Unregistering class device. ID = 'vcsa1'
class_hotplug - name = vcsa1
device class 'vcsa1': release.
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
CLASS: Unregistering class device. ID = 'vcs1'
class_hotplug - name = vcs1
device class 'vcs1': release.
CLASS: Unregistering class device. ID = 'vcsa1'
class_hotplug - name = vcsa1
device class 'vcsa1': release.
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
CLASS: Unregistering class device. ID = 'vcs1'
class_hotplug - name = vcs1
device class 'vcs1': release.
CLASS: Unregistering class device. ID = 'vcsa1'
class_hotplug - name = vcsa1
device class 'vcsa1': release.
CLASS: registering class device: ID = 'vcs1'
class_hotplug - name = vcs1
CLASS: registering class device: ID = 'vcsa1'
class_hotplug - name = vcsa1
Adding 506036k swap on /dev/hdb3. Priority:-1 extents:1
EXT3 FS on hdb1, internal journal
bus ide: add driver ide-cdrom
ide: Matched Device 1.1 with Driver ide-cdrom
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
bound device '1.1' to driver 'ide-cdrom'
ide: Bound Device 1.1 to Driver ide-cdrom
bus serio: add driver psmouse
serio: Matched Device serio0 with Driver psmouse
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
bound device 'serio0' to driver 'psmouse'
serio: Bound Device serio0 to Driver psmouse
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
CLASS: registering class device: ID = 'event0'
class_hotplug - name = event0
CLASS: registering class device: ID = 'event1'
class_hotplug - name = event1
CLASS: registering class device: ID = 'mouse0'
class_hotplug - name = mouse0
CLASS: registering class device: ID = 'mice'
class_hotplug - name = mice
CLASS: registering class device: ID = 'psaux'
class_hotplug - name = psaux
mice: PS/2 mouse device common for all mice
Linux agpgart interface v0.101 (c) Dave Jones
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
bus pci: add driver via-rhine
pci: Matched Device 0000:00:0b.0 with Driver via-rhine
ACPI: PCI Interrupt Link [PILB] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [PILB] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [PILB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [PILB] -> GSI 10 (level, low) -> IRQ 10
CLASS: registering class device: ID = 'eth0'
class_hotplug - name = eth0
eth0: VIA Rhine III at 0x17000, 00:02:44:a1:bd:0c, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
bound device '0000:00:0b.0' to driver 'via-rhine'
pci: Bound Device 0000:00:0b.0 to Driver via-rhine
device class 'sound': registering
bus type 'gameport' registered
solo1: version v0.20 time 17:42:51 Nov 14 2005
bus pci: add driver ESS Solo1
bus type 'usb' registered
device class 'usb_host': registering
device class 'usb': registering
bus usb: add driver usbfs
usbcore: registered new driver usbfs
bus usb: add driver hub
usbcore: registered new driver hub
bus usb: add driver usb
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
bus pci: add driver ohci_hcd
pci: Matched Device 0000:00:01.2 with Driver ohci_hcd
ACPI-0362: *** Error: Looking up [IRQW] in namespace, AE_NOT_FOUND
search_node c7bc46c0 start_node c7bc46c0 return_node 00000000
ACPI-1172: *** Error: Method execution failed [\_SB_.PILE._SRS] (Node c7bc46c0), AE_NOT_FOUND
ACPI: Unable to set IRQ for PCI Interrupt Link [PILE] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI Interrupt 0000:00:01.2[A]: no GSI - using IRQ 9
PCI: setting IRQ 9 as level-triggered
ohci_hcd 0000:00:01.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:01.2: USB HC TakeOver from BIOS/SMM
CLASS: registering class device: ID = 'usb1'
class_hotplug - name = usb1
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.2: irq 9, io mem 0x81300000
ohci_hcd 0000:00:01.2: resetting from state 'reset', control = 0x0
ohci_hcd 0000:00:01.2: enabling initreset quirk
ohci_hcd 0000:00:01.2: OHCI controller state
ohci_hcd 0000:00:01.2: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:01.2: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:01.2: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:01.2: intrstatus 0x00000004 SF
ohci_hcd 0000:00:01.2: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:01.2: fminterval a7782edf
ohci_hcd 0000:00:01.2: hcca frame #0003
ohci_hcd 0000:00:01.2: roothub.a 01000202 POTPGT=1 NPS NDP=2
ohci_hcd 0000:00:01.2: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:01.2: roothub.status 00008000 DRWE
ohci_hcd 0000:00:01.2: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:01.2: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:01.2: created debug files
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Silicon Integrated Systems [SiS] USB 1.0 Controller
usb usb1: Manufacturer: Linux 2.6.13.4 ohci_hcd
usb usb1: SerialNumber: 0000:00:01.2
DEV: registering device: ID = 'usb1'
usb usb1: hotplug
PM: Adding info for usb:usb1
bus usb: add device usb1
bound device 'usb1' to driver 'usb'
usb usb1: adding 1-0:1.0 (config #1, interface 0)
DEV: registering device: ID = '1-0:1.0'
usb 1-0:1.0: hotplug
PM: Adding info for usb:1-0:1.0
bus usb: add device 1-0:1.0
usb: Matched Device 1-0:1.0 with Driver hub
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
bound device '1-0:1.0' to driver 'hub'
usb: Bound Device 1-0:1.0 to Driver hub
bound device '0000:00:01.2' to driver 'ohci_hcd'
pci: Bound Device 0000:00:01.2 to Driver ohci_hcd
bus pci: add driver agpgart-sis
pci: Matched Device 0000:00:00.0 with Driver agpgart-sis
agpgart: Detected SiS 620 chipset
CLASS: registering class device: ID = 'agpgart'
class_hotplug - name = agpgart
agpgart: AGP aperture is 64M @ 0xe0000000
bound device '0000:00:00.0' to driver 'agpgart-sis'
pci: Bound Device 0000:00:00.0 to Driver agpgart-sis
bus pci: add driver PCI_IDE
pci: Matched Device 0000:00:00.1 with Driver PCI_IDE
bus pci: add driver sis5595_smbus
kobject_register failed for sis5595_smbus (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c028c770>] bus_add_driver+0x50/0xa8
[<c028cfa3>] driver_register+0x26/0x29
[<c021b3d5>] pci_register_driver+0x64/0x72
[<c880200a>] i2c_sis5595_init+0xa/0xc [i2c_sis5595]
[<c012e583>] sys_init_module+0xbc/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
bus pci: add driver sis630_smbus
device class 'sound': registering
kobject_register failed for snd (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c012d45e>] mod_sysfs_setup+0x3d/0x8d
[<c012e403>] load_module+0x78c/0x82d
[<c012e513>] sys_init_module+0x4c/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
kobject_register failed for snd_rawmidi (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c012d45e>] mod_sysfs_setup+0x3d/0x8d
[<c012e403>] load_module+0x78c/0x82d
[<c012e513>] sys_init_module+0x4c/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
kobject_register failed for snd_timer (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c012d45e>] mod_sysfs_setup+0x3d/0x8d
[<c012e403>] load_module+0x78c/0x82d
[<c012e513>] sys_init_module+0x4c/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
kobject_register failed for snd_pcm (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c012d45e>] mod_sysfs_setup+0x3d/0x8d
[<c012e403>] load_module+0x78c/0x82d
[<c012e513>] sys_init_module+0x4c/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
kobject_register failed for snd_es1938 (-17)
[<c0211501>] kobject_register+0x35/0x49
[<c012d45e>] mod_sysfs_setup+0x3d/0x8d
[<c012e403>] load_module+0x78c/0x82d
[<c012e513>] sys_init_module+0x4c/0x1e6
[<c0102cf9>] syscall_call+0x7/0xb
CLASS: registering class device: ID = 'event2'
class_hotplug - name = event2
input: PC Speaker
CLASS: registering class device: ID = 'rtc'
class_hotplug - name = rtc
Real Time Clock Driver v1.12
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
irq 10: nobody cared (try booting with the "irqpoll" option)
[<c0130ebd>] __report_bad_irq+0x31/0x77
[<c0130f90>] note_interrupt+0x75/0x99
[<c013092d>] __do_IRQ+0xce/0x115
[<c0104c8f>] do_IRQ+0x1b/0x28
[<c010372e>] common_interrupt+0x1a/0x20
[<c011badb>] __do_softirq+0x37/0x88
[<c011bb53>] do_softirq+0x27/0x2b
[<c011bbfc>] irq_exit+0x2d/0x37
[<c0104c94>] do_IRQ+0x20/0x28
[<c010372e>] common_interrupt+0x1a/0x20
[<c0130ba4>] setup_irq+0xc5/0x104
[<c892322b>] rhine_interrupt+0x0/0x1af [via_rhine]
[<c0130d31>] request_irq+0x75/0x8c
[<c8922eab>] rhine_open+0x31/0xdc [via_rhine]
[<c892322b>] rhine_interrupt+0x0/0x1af [via_rhine]
[<c032dde2>] dev_open+0x30/0x6c
[<c032eec1>] dev_change_flags+0x4d/0xf1
[<c0365d62>] devinet_ioctl+0x24b/0x4c2
[<c0367a46>] inet_ioctl+0x45/0x6f
[<c032693b>] sock_ioctl+0x1c5/0x1d0
[<c015ab98>] do_ioctl+0x28/0x66
[<c015ae75>] vfs_ioctl+0x17e/0x18c
[<c015aec9>] sys_ioctl+0x46/0x61
[<c0102cf9>] syscall_call+0x7/0xb
handlers:
[<c892322b>] (rhine_interrupt+0x0/0x1af [via_rhine])
Disabling IRQ #10
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 17
CLASS: registering class device: ID = 'vcs2'
class_hotplug - name = vcs2
CLASS: registering class device: ID = 'vcsa2'
class_hotplug - name = vcsa2
CLASS: Unregistering class device. ID = 'vcs2'
class_hotplug - name = vcs2
device class 'vcs2': release.
CLASS: Unregistering class device. ID = 'vcsa2'
class_hotplug - name = vcsa2
device class 'vcsa2': release.
CLASS: registering class device: ID = 'vcs3'
class_hotplug - name = vcs3
CLASS: registering class device: ID = 'vcsa3'
class_hotplug - name = vcsa3
CLASS: Unregistering class device. ID = 'vcs3'
class_hotplug - name = vcs3
device class 'vcs3': release.
CLASS: Unregistering class device. ID = 'vcsa3'
class_hotplug - name = vcsa3
device class 'vcsa3': release.
CLASS: registering class device: ID = 'vcs4'
class_hotplug - name = vcs4
CLASS: registering class device: ID = 'vcsa4'
class_hotplug - name = vcsa4
CLASS: Unregistering class device. ID = 'vcs4'
class_hotplug - name = vcs4
device class 'vcs4': release.
CLASS: Unregistering class device. ID = 'vcsa4'
class_hotplug - name = vcsa4
device class 'vcsa4': release.
CLASS: registering class device: ID = 'vcs5'
class_hotplug - name = vcs5
CLASS: registering class device: ID = 'vcsa5'
class_hotplug - name = vcsa5
CLASS: Unregistering class device. ID = 'vcs5'
class_hotplug - name = vcs5
device class 'vcs5': release.
CLASS: Unregistering class device. ID = 'vcsa5'
class_hotplug - name = vcsa5
device class 'vcsa5': release.
CLASS: registering class device: ID = 'vcs6'
class_hotplug - name = vcs6
CLASS: registering class device: ID = 'vcsa6'
class_hotplug - name = vcsa6
CLASS: Unregistering class device. ID = 'vcs6'
class_hotplug - name = vcs6
device class 'vcs6': release.
CLASS: Unregistering class device. ID = 'vcsa6'
class_hotplug - name = vcsa6
device class 'vcsa6': release.