rendered paste bodynaylor@naylor-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:26:18 UTC 2006 (Ubuntu 2.6.17-10.34-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001dfec000 (usable)
[17179569.184000] BIOS-e820: 000000001dfec000 - 000000001dfef000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001dfef000 - 000000001dfff000 (reserved)
[17179569.184000] BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 479MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 122860
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 118764 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS ) @ 0x000f8070
[17179569.184000] ACPI: RSDT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec000
[17179569.184000] ACPI: FADT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec100
[17179569.184000] ACPI: BOOT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec040
[17179569.184000] ACPI: MADT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec080
[17179569.184000] ACPI: DSDT (v001 ASUS A7N266VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=9f3652e8-82c8-44d6-b18c-10666d202ba5 ro quiet splash vga=791
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2004.858 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour dummy device 80x25
[17179570.968000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.968000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.980000] Memory: 475928k/491440k available (1829k kernel code, 14804k reserved, 1038k data, 288k init, 0k highmem)
[17179570.980000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.060000] Calibrating delay using timer specific routine.. 4013.69 BogoMIPS (lpj=8027385)
[17179571.060000] Security Framework v1.0.0 initialized
[17179571.060000] SELinux: Disabled at boot.
[17179571.060000] Mount-cache hash table entries: 512
[17179571.060000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.060000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.060000] CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
[17179571.060000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179571.060000] CPU: L2 Cache: 256K (64 bytes/line)
[17179571.060000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179571.060000] CPU: AMD Athlon(TM) XP 2400+ stepping 01
[17179571.060000] Checking 'hlt' instruction... OK.
[17179571.076000] SMP alternatives: switching to UP code
[17179571.076000] Freeing SMP alternatives: 0k freed
[17179571.076000] checking if image is initramfs... it is
[17179571.660000] Freeing initrd memory: 6989k freed
[17179571.660000] ACPI: Core revision 20060707
[17179571.664000] ACPI: Looking for DSDT ... not found!
[17179571.664000] ENABLING IO-APIC IRQs
[17179571.664000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.808000] NET: Registered protocol family 16
[17179571.808000] EISA bus registered
[17179571.808000] ACPI: bus type pci registered
[17179571.808000] PCI: PCI BIOS revision 2.10 entry at 0xf1b20, last bus=2
[17179571.808000] PCI: Using configuration type 1
[17179571.808000] Setting up standard PCI resources
[17179571.816000] ACPI: Interpreter enabled
[17179571.816000] ACPI: Using IOAPIC for interrupt routing
[17179571.820000] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 18) *5
[17179571.820000] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 18) *0, disabled.
[17179571.820000] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 18) *6
[17179571.820000] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 18) *0, disabled.
[17179571.820000] ACPI: PCI Interrupt Link [LNKE] (IRQs 19) *11
[17179571.820000] ACPI: PCI Interrupt Link [LNKF] (IRQs 20 21 22) *5
[17179571.820000] ACPI: PCI Interrupt Link [LNKU] (IRQs 20 21 22) *10
[17179571.820000] ACPI: PCI Interrupt Link [LNKI] (IRQs 20 21 22) *10
[17179571.820000] ACPI: PCI Interrupt Link [LNKJ] (IRQs 20 21 22) *5
[17179571.820000] ACPI: PCI Interrupt Link [LNKK] (IRQs 20 21 22) *11
[17179571.820000] ACPI: PCI Interrupt Link [LNKM] (IRQs 20 21 22) *0, disabled.
[17179571.820000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.820000] PCI: Probing PCI hardware (bus 00)
[17179571.820000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179571.824000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:09.0
[17179571.824000] Boot video device is 0000:02:00.0
[17179571.824000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179571.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[17179571.836000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.836000] pnp: PnP ACPI init
[17179571.844000] pnp: PnP ACPI: found 15 devices
[17179571.844000] PnPBIOS: Disabled by ACPI PNP
[17179571.844000] PCI: Using ACPI for IRQ routing
[17179571.844000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.848000] pnp: 00:02: ioport range 0xe400-0xe4fe could not be reserved
[17179571.848000] pnp: 00:02: ioport range 0xe4ff-0xe4ff has been reserved
[17179571.848000] pnp: 00:02: ioport range 0xcf0-0xcf3 could not be reserved
[17179571.848000] pnp: 00:0d: ioport range 0x370-0x371 has been reserved
[17179571.848000] PCI: Bridge: 0000:00:08.0
[17179571.848000] IO window: b000-bfff
[17179571.848000] MEM window: ec800000-ecffffff
[17179571.848000] PREFETCH window: disabled.
[17179571.848000] PCI: Bridge: 0000:00:1e.0
[17179571.848000] IO window: disabled.
[17179571.848000] MEM window: eb000000-ec7fffff
[17179571.848000] PREFETCH window: eff00000-f7ffffff
[17179571.848000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179571.848000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.848000] NET: Registered protocol family 2
[17179571.888000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.888000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179571.888000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179571.888000] TCP: Hash tables configured (established 16384 bind 8192)
[17179571.888000] TCP reno registered
[17179571.888000] Simple Boot Flag at 0x3f set to 0x1
[17179571.888000] audit: initializing netlink socket (disabled)
[17179571.888000] audit(1166717260.888:1): initialized
[17179571.888000] VFS: Disk quotas dquot_6.5.1
[17179571.888000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.888000] Initializing Cryptographic API
[17179571.888000] io scheduler noop registered
[17179571.888000] io scheduler anticipatory registered
[17179571.888000] io scheduler deadline registered
[17179571.888000] io scheduler cfq registered (default)
[17179571.888000] isapnp: Scanning for PnP cards...
[17179572.240000] isapnp: No Plug & Play device found
[17179572.264000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.264000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.264000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.264000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.264000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.264000] mice: PS/2 mouse device common for all mice
[17179572.264000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.264000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.264000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.268000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179572.268000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179572.268000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.268000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.268000] EISA: Probing bus 0 at eisa.0
[17179572.268000] Cannot allocate resource for EISA slot 5
[17179572.268000] EISA: Detected 0 cards.
[17179572.268000] TCP bic registered
[17179572.268000] NET: Registered protocol family 1
[17179572.268000] NET: Registered protocol family 8
[17179572.268000] NET: Registered protocol family 20
[17179572.268000] Using IPI Shortcut mode
[17179572.268000] ACPI: (supports S0 S1 S4 S5)
[17179572.268000] Freeing unused kernel memory: 288k freed
[17179572.316000] vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 3072k, total 32768k
[17179572.316000] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[17179572.316000] vesafb: protected mode interface info at c000:bf60
[17179572.316000] vesafb: scrolling: redraw
[17179572.316000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[17179572.404000] Console: switching to colour frame buffer device 128x48
[17179572.404000] fb0: VESA VGA frame buffer device
[17179572.572000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.524000] Capability LSM initialized
[17179574.032000] SCSI subsystem initialized
[17179574.040000] libata version 1.20 loaded.
[17179574.044000] NFORCE: IDE controller at PCI slot 0000:00:09.0
[17179574.044000] NFORCE: chipset revision 195
[17179574.044000] NFORCE: not 100% native mode: will probe irqs later
[17179574.044000] NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
[17179574.044000] NFORCE: 0000:00:09.0 (rev c3) UDMA100 controller
[17179574.044000] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
[17179574.044000] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio
[17179574.044000] Probing IDE interface ide0...
[17179574.444000] hda: TSSTcorpCD-R/RW SH-R522C, ATAPI CD/DVD-ROM drive
[17179574.724000] hdb: ST380020A, ATA DISK drive
[17179574.784000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.788000] Probing IDE interface ide1...
[17179575.368000] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.368000] Uniform CD-ROM driver Revision: 3.20
[17179575.380000] hdb: max request size: 128KiB
[17179575.380000] hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.380000] hdb: cache flushes not supported
[17179575.380000] hdb: hdb1 hdb2 < hdb5 >
[17179575.656000] Probing IDE interface ide1...
[17179575.696000] usbcore: registered new driver usbfs
[17179575.696000] usbcore: registered new driver hub
[17179575.696000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.696000] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 22
[17179575.696000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 22 (level, high) -> IRQ 177
[17179575.696000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179575.696000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179575.696000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179575.716000] ohci_hcd 0000:00:02.0: irq 177, io mem 0xef000000
[17179575.772000] usb usb1: configuration #1 chosen from 1 choice
[17179575.772000] hub 1-0:1.0: USB hub found
[17179575.772000] hub 1-0:1.0: 3 ports detected
[17179575.876000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKU] -> GSI 22 (level, high) -> IRQ 177
[17179575.876000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179575.876000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[17179575.876000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[17179575.876000] ohci_hcd 0000:00:03.0: irq 177, io mem 0xee800000
[17179575.932000] usb usb2: configuration #1 chosen from 1 choice
[17179575.932000] hub 2-0:1.0: USB hub found
[17179575.932000] hub 2-0:1.0: 3 ports detected
[17179576.180000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[17179576.392000] usb 1-1: configuration #1 chosen from 1 choice
[17179576.404000] usbcore: registered new driver hiddev
[17179576.416000] input: Acrox USB & PS/2 Mouse as /class/input/input1
[17179576.416000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:02.0-1
[17179576.416000] usbcore: registered new driver usbhid
[17179576.416000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179576.480000] kjournald starting. Commit interval 5 seconds
[17179576.480000] EXT3-fs: mounted filesystem with ordered data mode.
[17179590.136000] Real Time Clock Driver v1.12ac
[17179590.220000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.288000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.380000] input: PC Speaker as /class/input/input2
[17179590.876000] parport: PnPBIOS parport detected.
[17179590.876000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179591.052000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.056000] agpgart: Detected NVIDIA nForce chipset
[17179591.060000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179591.176000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179591.176000] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 21
[17179591.176000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKI] -> GSI 21 (level, high) -> IRQ 185
[17179591.176000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179591.400000] nvidia: module license 'NVIDIA' taints kernel.
[17179591.408000] ts: Compaq touchscreen protocol output
[17179591.696000] eth0: forcedeth.c: subsystem: 01043:0c11 bound to 0000:00:04.0
[17179591.696000] PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
[17179591.696000] ACPI: PCI Interrupt Link [LNKK] enabled at IRQ 20
[17179591.696000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKK] -> GSI 20 (level, high) -> IRQ 193
[17179591.696000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179592.012000] intel8x0_measure_ac97_clock: measured 52721 usecs
[17179592.012000] intel8x0: clocking to 47449
[17179592.020000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
[17179592.020000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 19 (level, high) -> IRQ 201
[17179592.024000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[17179592.408000] eth0: no link during initialization.
[17179592.452000] lp0: using parport0 (interrupt-driven).
[17179592.556000] Adding 1413680k swap on /dev/disk/by-uuid/547a0683-d622-4706-be53-61638ada5f4d. Priority:-1 extents:1 across:1413680k
[17179592.604000] EXT3 FS on hdb1, internal journal
[17179592.792000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179592.792000] md: bitmap version 4.39
[17179592.844000] eth0: link up.
[17179593.016000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179593.496000] NET: Registered protocol family 17
[17179596.192000] NET: Registered protocol family 10
[17179596.192000] lo: Disabled Privacy Extensions
[17179596.192000] IPv6 over IPv4 tunneling driver
[17179600.364000] ACPI: Power Button (FF) [PWRF]
[17179600.364000] ACPI: Power Button (CM) [PWRB]
[17179600.484000] ibm_acpi: ec object not found
[17179600.516000] pcc_acpi: loading...
[17179600.972000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179605.208000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179605.208000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179605.208000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
[17179606.144000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179606.144000] apm: overridden by ACPI.
[17179607.176000] eth0: no IPv6 routers present
[17179610.304000] Bluetooth: Core ver 2.8
[17179610.304000] NET: Registered protocol family 31
[17179610.304000] Bluetooth: HCI device and connection manager initialized
[17179610.304000] Bluetooth: HCI socket layer initialized
[17179610.460000] Bluetooth: L2CAP ver 2.8
[17179610.460000] Bluetooth: L2CAP socket layer initialized
[17179610.616000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179610.752000] Bluetooth: RFCOMM socket layer initialized
[17179610.752000] Bluetooth: RFCOMM TTY layer initialized
[17179610.752000] Bluetooth: RFCOMM ver 1.7
naylor@naylor-desktop:~$