# ipf.rules
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-ipf.html
#################################################################
# No restrictions on Inside LAN Interface for private network
# Not needed unless you have LAN
#################################################################
pass out quick on bge1 all
pass in quick on bge1 all
#################################################################
# No restrictions on Loopback Interface
#################################################################
pass in quick on lo0 all
pass out quick on lo0 all
#################################################################
# Interface facing Public Internet (Outbound Section)
# Interrogate session start requests originating from behind the
# firewall on the private network
# or from this gateway server destine for the public Internet.
#################################################################
# Allow out access to my ISP's Domain name server.
# xxx must be the IP address of your ISP's DNS.
# Dup these lines if your ISP has more than one DNS server
# Get the IP addresses from /etc/resolv.conf file
#pass out quick on bge0 proto tcp from any to xxx port = 53 flags S keep state
#pass out quick on bge0 proto udp from any to xxx port = 53 keep state
pass out quick on bge0 proto tcp from any to 0.0.0.0/0 port = 53 flags S keep state
pass out quick on bge0 proto udp from any to 0.0.0.0/0 port = 53 keep state
# Allow out access to my ISP's DHCP server for cable or DSL networks.
# This rule is not needed for 'user ppp' type connection to the
# public Internet, so you can delete this whole group.
# Use the following rule and check log for IP address.
# Then put IP address in commented out rule & delete first rule
pass out log quick on bge0 proto udp from any to any port = 67 keep state
#pass out quick on bge0 proto udp from any to z.z.z.z port = 67 keep state
# Allow out non-secure standard www function
pass out quick on bge0 proto tcp from any to any port = 80 flags S keep state
# Allow out secure www function https over TLS SSL
pass out quick on bge0 proto tcp from any to any port = 443 flags S keep state
# Allow out send & get email function
pass out quick on bge0 proto tcp from any to any port = 110 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 25 flags S keep state
# Gmail pop 995
pass out quick on bge0 proto tcp from any to any port = 995 flags S keep state
# Gmail smtp 587
pass out quick on bge0 proto tcp from any to any port = 587 flags S keep state
# Allow out Time
pass out quick on bge0 proto tcp from any to any port = 37 flags S keep state
# Allow out nntp news
pass out quick on bge0 proto tcp from any to any port = 119 flags S keep state
# Allow out gateway & LAN users non-secure FTP ( both passive & active modes)
# This function uses the IPNAT built in FTP proxy function coded in
# the nat rules file to make this single rule function correctly.
# If you want to use the pkg_add command to install application packages
# on your gateway system you need this rule.
pass out quick on bge0 proto tcp from any to any port = 21 flags S keep state
# Allow out non-secure ftp
pass out quick on bge0 proto tcp from any port = 20 to any flags S keep state
# Allow out secure FTP, Telnet, and SCP
# This function is using SSH (secure shell)
pass out quick on bge0 proto tcp from any to any port = 22 flags S keep state
# Allow out non-secure Telnet
pass out quick on bge0 proto tcp from any to any port = 23 flags S keep state
# Allow out FBSD CVSUP function
pass out quick on bge0 proto tcp from any to any port = 5999 flags S keep state
# Allow out ping to public Internet
pass out quick on bge0 proto icmp from any to any icmp-type 8 keep state
# Allow out whois for LAN PC to public Internet
pass out quick on bge0 proto tcp from any to any port = 43 flags S keep state
# Allow out Cpanel
pass out quick on bge0 proto tcp from any to any port = 2082 flags S keep state
# Allow out Webmail
pass out quick on bge0 proto tcp from any to any port = 2095 flags S keep state
# Allow out Correo Remoto EPM
pass out quick on bge0 proto tcp from any to any port = 8080 flags S keep state
# Allow out Comision Nacional del Servicio Civil
pass out quick on bge0 proto tcp from any to any port = 8090 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 8100 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 8102 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 8096 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 8091 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 8092 flags S keep state
# Allow out XChat
pass out quick on bge0 proto tcp from any to any port = 6667 flags S keep state
# Allow out aMule (4661 TCP outgoing, 4662 TCP outgoing, 4665 UDP outgoing, 4672 UDP outgoing)
pass out quick on bge0 proto tcp from any to any port = 4661 flags S keep state
pass out quick on bge0 proto tcp from any to any port = 4662 flags S keep state
pass out quick on bge0 proto udp from any to any port = 4665 keep state
pass out quick on bge0 proto udp from any to any port = 4672 keep state
# Allow out Azureus
#pass out quick on bge0 proto tcp from any to any port = 16163 Flags S keep state
#pass out quick on bge0 proto udp from any to any port = 16163 keep state
# Block and log only the first occurrence of everything
# else that's trying to get out.
# This rule enforces the block all by default logic.
block out log first quick on bge0 all
#################################################################
# Interface facing Public Internet (Inbound Section)
# Interrogate packets originating from the public Internet
# destine for this gateway server or the private network.
#################################################################
# Block all inbound traffic from non-routable or reserved address spaces
block in quick on bge0 from 192.168.0.0/16 to any #RFC 1918 private IP
block in quick on bge0 from 172.16.0.0/12 to any #RFC 1918 private IP
block in quick on bge0 from 10.0.0.0/8 to any #RFC 1918 private IP
block in quick on bge0 from 127.0.0.0/8 to any #loopback
block in quick on bge0 from 0.0.0.0/8 to any #loopback
block in quick on bge0 from 169.254.0.0/16 to any #DHCP auto-config
block in quick on bge0 from 192.0.2.0/24 to any #reserved for docs
block in quick on bge0 from 204.152.64.0/23 to any #Sun cluster interconnect
block in quick on bge0 from 224.0.0.0/3 to any #Class D & E multicast
##### Block a bunch of different nasty things. ############
# That I do not want to see in the log
# Block frags
block in quick on bge0 all with frags
# Block short tcp packets
block in quick on bge0 proto tcp all with short
# block source routed packets
block in quick on bge0 all with opt lsrr
block in quick on bge0 all with opt ssrr
# Block nmap OS fingerprint attempts
# Log first occurrence of these so I can get their IP address
block in log first quick on bge0 proto tcp from any to any flags FUP
# Block anything with special options
block in quick on bge0 all with ipopts
# Block public pings
block in quick on bge0 proto icmp all icmp-type 8
# Block ident
block in quick on bge0 proto tcp from any to any port = 113
# Block all Netbios service. 137=name, 138=datagram, 139=session
# Netbios is MS/Windows sharing services.
# Block MS/Windows hosts2 name server requests 81
block in log first quick on bge0 proto tcp/udp from any to any port = 137
block in log first quick on bge0 proto tcp/udp from any to any port = 138
block in log first quick on bge0 proto tcp/udp from any to any port = 139
block in log first quick on bge0 proto tcp/udp from any to any port = 81
# Allow traffic in from ISP's DHCP server. This rule must contain
# the IP address of your ISP's DHCP server as it's the only
# authorized source to send this packet type. Only necessary for
# cable or DSL configurations. This rule is not needed for
# 'user ppp' type connection to the public Internet.
# This is the same IP address you captured and
# used in the outbound section.
pass in quick on bge0 proto udp from 0.0.0.0/0 to any port = 68 keep state
# Allow in standard www function because I have apache server
pass in quick on bge0 proto tcp from any to any port = 80 flags S keep state
# Allow in non-secure Telnet session from public Internet
# labeled non-secure because ID/PW passed over public Internet as clear text.
# Delete this sample group if you do not have telnet server enabled.
#pass in quick on bge0 proto tcp from any to any port = 23 flags S keep state
# Allow in non-secure FTP active/pasive
# ftp server:
# ftp session
pass in quick on bge0 proto tcp from any to any port = 21 flags S keep state
# passive ftp-data
pass in quick on bge0 proto tcp from any to any port > 49151 flags S keep state
# active ftp-data
# pass out quick on bge0 proto tcp from any port = 20 to any flags S keep state
# end ftp-server
# Allow in secure FTP, Telnet, and SCP from public Internet
# This function is using SSH (secure shell)
pass in quick on bge0 proto tcp from any to any port = 22 flags S keep state
# Allow in aMule (4662 TCP incoming, 4672 UDP incoming, 4711 TCP incoming)
pass in quick on bge0 proto tcp from any to any port = 4672 flags S keep state
pass in quick on bge0 proto udp from any to any port = 4711 keep state
# Allow in Azureus
#pass in quick on bge0 proto tcp from any to 192.168.7.100 port = 16163 flags S keep state
#pass in quick on bge0 proto udp from any to 192.168.7.100 port = 16163 keep state
# Block and log only first occurrence of all remaining traffic
# coming into the firewall. The logging of only the first
# occurrence stops a .denial of service. attack targeted
# at filling up your log file space.
# This rule enforces the block all by default logic.
block in log first quick on bge0 all
################### End of rules file #####################################
# ipnat.rules
#--------------------------------------------------------------------
# Do 'normal' IP address translation. This line will take all packets
# going out on your external NIC (bge0) that have a source address coming
# from your internal network (192.168.1.0), and translate it to whatever
# IP address your external NIC happens to have at that time
#--------------------------------------------------------------------
# FTP
map bge0 0.0.0.0/0 -> 0/32 proxy port 21 ftp/tcp
# NAT
map bge0 192.168.1.0/24 -> 0.0.0.0/32 portmap tcp/udp auto
map bge0 192.168.1.0/24 -> 0.0.0.0/32
#--------------------------------------------------------------------
# If you have a system on your internal network that needs to be
# 'reachable' by external systems on the internet, you'll need a rule
# similar to the one below. This one takes all inbound http traffic
# (TCP port 80) that hits the firewall's external interface (rl0) and
# redirects it to port 80 on the 192.168.1.50 system on the internal network.
# Simply uncomment the rule, change the IP address and port number so that
# it does what you need. Remember that you have to enable the corresponding
# inbound filter in your /etc/ipf.rules file, too.
#--------------------------------------------------------------------
# rdr rl0 0.0.0.0/0 port 80 -> 192.168.1.50 port 80 tcp
# Redireccion para el Squid
# bge0 Internet
# Inseguro www 80
rdr bge1 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp
# Seguro www 443 (esto no deja entrar a gmail.com, hotmail, etc)
#rdr bge1 0.0.0.0/0 port 443 -> 127.0.0.1 port 3128 tcp
# Redireccion para el aMule
rdr bge0 0.0.0.0/0 port 4661 -> 192.168.7.100 port 4661 tcp
rdr bge0 0.0.0.0/0 port 4662 -> 192.168.7.100 port 4662 tcp
rdr bge0 0.0.0.0/0 port 4711 -> 192.168.7.100 port 4711 tcp
rdr bge0 0.0.0.0/0 port 4672 -> 192.168.7.100 port 4672 udp
rdr bge0 0.0.0.0/0 port 4665 -> 192.168.7.100 port 4665 udp
# Redireccion para el Azureus
rdr bge0 0.0.0.0/0 port 16163 -> 192.168.7.100 port 16163 tcp
rdr bge0 0.0.0.0/0 port 16163 -> 192.168.7.100 port 16163 udp