rendered paste bodysmartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3160023A
Serial Number: 3LJ23F82
Firmware Version: 8.01
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Dec 20 01:06:52 2006 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 065 060 006 Pre-fail Always - 105787549
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 109
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 200300745
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6727
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 2010
194 Temperature_Celsius 0x0022 029 066 000 Old_age Always - 29
195 Hardware_ECC_Recovered 0x001a 065 060 000 Old_age Always - 105787549
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 7
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 64 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 64 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 62 d9 24 e0 Error: UNC at LBA = 0x0024d962 = 2414946
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
29 00 08 61 d9 24 e0 00 00:13:34.912 READ MULTIPLE EXT
29 00 e0 89 d8 24 e0 00 00:13:34.881 READ MULTIPLE EXT
29 00 08 81 d8 24 e0 00 00:13:34.856 READ MULTIPLE EXT
29 00 00 b9 d5 24 e0 00 00:13:34.833 READ MULTIPLE EXT
29 00 00 31 d4 24 e0 00 00:13:34.811 READ MULTIPLE EXT
Error 63 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0f 5a d9 24 e0 Error: UNC at LBA = 0x0024d95a = 2414938
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
29 00 e0 89 d8 24 e0 00 00:13:34.912 READ MULTIPLE EXT
29 00 08 81 d8 24 e0 00 00:13:34.881 READ MULTIPLE EXT
29 00 00 b9 d5 24 e0 00 00:13:34.856 READ MULTIPLE EXT
29 00 00 31 d4 24 e0 00 00:13:34.833 READ MULTIPLE EXT
29 00 00 31 d3 24 e0 00 00:13:34.811 READ MULTIPLE EXT
Error 62 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 c0 a9 d8 24 e0 00 00:00:35.811 READ DMA EXT
25 00 c8 a1 d8 24 e0 00 00:00:31.912 READ DMA EXT
25 00 d0 99 d8 24 e0 00 00:00:27.965 READ DMA EXT
25 00 d8 91 d8 24 e0 00 00:00:23.999 READ DMA EXT
25 00 e0 89 d8 24 e0 00 00:00:23.991 READ DMA EXT
Error 61 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 c8 a1 d8 24 e0 00 00:00:35.811 READ DMA EXT
25 00 d0 99 d8 24 e0 00 00:00:31.912 READ DMA EXT
25 00 d8 91 d8 24 e0 00 00:00:27.965 READ DMA EXT
25 00 e0 89 d8 24 e0 00 00:00:23.999 READ DMA EXT
25 00 08 81 d8 24 e0 00 00:00:23.991 READ DMA EXT
Error 60 occurred at disk power-on lifetime: 6715 hours (279 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 63 d9 24 e0 Error: UNC at LBA = 0x0024d963 = 2414947
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 d0 99 d8 24 e0 00 00:00:23.911 READ DMA EXT
25 00 d8 91 d8 24 e0 00 00:00:31.912 READ DMA EXT
25 00 e0 89 d8 24 e0 00 00:00:27.965 READ DMA EXT
25 00 08 81 d8 24 e0 00 00:00:23.999 READ DMA EXT
25 00 00 b9 d5 24 e0 00 00:00:23.991 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 6716 304404835
# 2 Short offline Completed: read failure 90% 6715 304404835
# 3 Extended offline Completed: read failure 90% 6715 304404835
# 4 Short offline Completed: read failure 90% 6715 304404835
# 5 Short offline Completed: read failure 90% 6715 304404835
# 6 Short offline Completed: read failure 90% 6715 304404835
# 7 Short offline Completed: read failure 90% 6715 304404835
# 8 Short offline Completed: read failure 90% 6715 304404835
# 9 Short offline Completed: read failure 90% 6715 304404835
#10 Short offline Completed: read failure 90% 6715 304404835
#11 Short offline Completed without error 00% 5959 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.