rendered paste bodyUsing PowerMac machine description
Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
Linux version 2.6.18-1.2849.fc6smp (brewbuilder@js20-bc1-10.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 13:29:25 EST 2006
Found initrd at 0xc1a00000:0xc1c66c00
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11
Mapped at 0xfdfc0000
Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdf40000
PowerMac motherboard: PowerMac G4 Silver
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=664, gen1=665
nvram: Active bank is: 1
nvram: OF partition at 0x210
nvram: XP partition at 0xffffffff
nvram: NR partition at 0xffffffff
Top of RAM: 0x40000000, Total RAM: 0x40000000
Memory hole size: 0MB
On node 0 totalpages: 262144
DMA zone: 196608 pages, LIFO batch:31
HighMem zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 262144
Kernel command line: root=/dev/VolGroup00/LogVol00 ro rhgb quiet
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: on
time_init: decrementer frequency = 33.290001 MHz
time_init: processor frequency = 533.333332 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
High memory: 262144k
Memory: 1029328k/1048576k available (3600k kernel code, 280628k reserved, 352k data, 313k bss, 212k init)
Calibrating delay loop... 66.30 BogoMIPS (lpj=33152)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
device-tree: Duplicate name in /cpus/PowerPC,G4@1, renamed to "l2-cache#1"
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000
channel 1 bus <multibus>
channel 2 bus <multibus>
Processor timebase sync using GPIO 0x73
mpic: requesting IPIs ...
CPU0: L2CR is b9000000
CPU1: L2CR was 39000000
CPU1: L2CR set to b9000000
Processor 1 found.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=432 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=608 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1600 bytes
migration_cost=4789
checking if image is initramfs... it is
Freeing initrd memory: 2459k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Enabling device 0001:10:14.0 (0014 -> 0017)
PCI: Enabling device 0001:10:14.1 (0014 -> 0017)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Thermal assist unit using timers, shrink_timer: 2000 jiffies
audit: initializing netlink socket (disabled)
audit(1166520813.073:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Using unsupported 1600x1024 NVDA,NVMac at 98004000, depth=8, pitch=2048
Console: switching to colour frame buffer device 200x64
fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,NVMac@10
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Apple UniNorth 1.5 chipset
agpgart: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
MacIO PCI driver attached to Keylargo chipset
input: Macintosh mouse button emulation as /class/input/input0
apm_emu: APM Emulation 0.5 initialized.
adb: starting probe task...
adb: finished probe task...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
Probing IDE interface ide0...
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xf101a000-0xf101a007,0xf101a160 on irq 20
ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21
Probing IDE interface ide2...
Probing IDE interface ide0...
Probing IDE interface ide2...
ide-floppy driver 0.99.newide
hdd: No disk in drive
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
PowerMac i2c bus uni-n 0 registered
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
input: PMU as /class/input/input1
Freeing unused kernel memory: 212k init
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
ohci_hcd 0001:10:18.0: OHCI Host Controller
ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:18.0: irq 27, io mem 0x80083000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
ohci_hcd 0001:10:19.0: OHCI Host Controller
ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:19.0: irq 28, io mem 0x80082000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hdd: No disk in drive
usb 1-2: new full speed USB device using ohci_hcd and address 2
SCSI subsystem initialized
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
sym0: <1010-33> rev 0x1 at pci 0001:10:14.0 irq 54
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS 500 FW: 6.2.D USB FW: c1 ] on usb-0001:10:19.0-1
usb 1-2.2: new full speed USB device using ohci_hcd and address 3
usb 1-2.2: configuration #1 chosen from 1 choice
hub 1-2.2:1.0: USB hub found
hub 1-2.2:1.0: 3 ports detected
usb 1-2.3: new low speed USB device using ohci_hcd and address 4
usb 1-2.3: configuration #1 chosen from 1 choice
Vendor: SEAGATE Model: ST173404LW Rev: 3701
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: tagged command queuing enabled, command queue depth 16.
target0:0:0: Beginning Domain Validation
target0:0:0: asynchronous
target0:0:0: wide asynchronous
target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:0: Ending Domain Validation
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
sda: Write Protect is off
sda: Mode Sense: c1 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
sda: Write Protect is off
sda: Mode Sense: c1 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: Attached scsi disk sda
Vendor: SEAGATE Model: ST173404LWV Rev: 4301
Type: Direct-Access ANSI SCSI revision: 03
target0:0:1: tagged command queuing enabled, command queue depth 16.
target0:0:1: Beginning Domain Validation
target0:0:1: asynchronous
target0:0:1: wide asynchronous
target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:1: Ending Domain Validation
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
sdb: Write Protect is off
sdb: Mode Sense: 9f 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
sdb: Write Protect is off
sdb: Mode Sense: 9f 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: [mac] sdb1 sdb2 sdb3 sdb4
sd 0:0:1:0: Attached scsi disk sdb
Vendor: SEAGATE Model: ST373405LW Rev: 0003
Type: Direct-Access ANSI SCSI revision: 03
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous
target0:0:2: wide asynchronous
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:2: Ending Domain Validation
SCSI device sdc: 143374741 512-byte hdwr sectors (73408 MB)
sdc: Write Protect is off
sdc: Mode Sense: a3 00 10 08
SCSI device sdc: drive cache: write back w/ FUA
SCSI device sdc: 143374741 512-byte hdwr sectors (73408 MB)
sdc: Write Protect is off
sdc: Mode Sense: a3 00 10 08
SCSI device sdc: drive cache: write back w/ FUA
sdc: [mac] sdc1 sdc2 sdc3 sdc4
sd 0:0:2:0: Attached scsi disk sdc
sym1: <1010-33> rev 0x1 at pci 0001:10:14.1 irq 54
sym1: No NVRAM, ID 7, Fast-80, SE, parity checking
sym1: SCSI BUS has been reset.
sym1: SCSI BUS mode change from SE to SE.
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
drivers/usb/input/hid-core.c: timeout initializing reports
hiddev97: USB HID v1.00 Device [LG Electronics Inc. USB Monitor] on usb-0001:10:18.0-2.3
usb 1-2.2.1: new full speed USB device using ohci_hcd and address 5
usb 1-2.2.1: configuration #1 chosen from 1 choice
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.2.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.2.1
usb 1-2.2.2: new low speed USB device using ohci_hcd and address 6
usb 1-2.2.2: configuration #1 chosen from 1 choice
input: KOOL Contour UniMouse Optical as /class/input/input4
input: USB HID v1.10 Mouse [KOOL Contour UniMouse Optical] on usb-0001:10:18.0-2.2.2
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
hdd: No disk in drive
hdd: No disk in drive
hdd: No disk in drive
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats
security: 59 classes, 49430 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1166520837.036:2): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 206053, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:30:65:b9:22:ae
eth0: Found BCM5401 PHY
eth0: Link is up at 1000 Mbps, full-duplex.
ieee1394: Initialized config rom entry `ip1394'
PCI: Enabling device 0001:10:12.0 (0010 -> 0012)
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
pmac_zilog: i2c-modem detected, id: 1
pmac_zilog: Error registering serial device, disabling pmac_zilog.
pmac_zilog: Did another serial driver already claim the minors?
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[52] MMIO=[80084000-800847ff] Max Packet=[1024] IR/IT contexts=[4/4]
ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
pmac_zilog: i2c-modem detected, id: 1
pmac_zilog: Error registering serial device, disabling pmac_zilog.
pmac_zilog: Did another serial driver already claim the minors?
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
Badness in ohci_hw_csr_reg at drivers/ieee1394/ohci1394.c:3187
Call Trace:
[CFD8FBD0] [C0008D8C] show_stack+0x50/0x184 (unreliable)
[CFD8FBF0] [C0010FFC] program_check_exception+0x194/0x51c
[CFD8FC40] [C0012AAC] ret_from_except_full+0x0/0x4c
--- Exception: 700 at ohci_hw_csr_reg+0x9c/0xe0 [ohci1394]
LR = host_reset+0x7c/0x110 [ieee1394]
[CFD8FD00] [C1F72F20] 0xc1f72f20 (unreliable)
[CFD8FD20] [F13AF060] host_reset+0x7c/0x110 [ieee1394]
[CFD8FD40] [F13AE4E0] highlevel_host_reset+0x44/0x98 [ieee1394]
[CFD8FD60] [F13AB9B0] hpsb_selfid_complete+0x2e0/0x2f4 [ieee1394]
[CFD8FD80] [F135638C] ohci_irq_handler+0x900/0x970 [ohci1394]
[CFD8FDA0] [C0067030] handle_IRQ_event+0x54/0xa8
[CFD8FDC0] [C006886C] handle_fasteoi_irq+0xd0/0x138
[CFD8FDE0] [C0006898] do_IRQ+0x70/0xac
[CFD8FDF0] [C0012AF8] ret_from_except+0x0/0x14
--- Exception: 501 at _spin_unlock_irqrestore+0x20/0x30
LR = _spin_unlock_irqrestore+0x18/0x30
[CFD8FED0] [F13514FC] set_phy_reg+0xe4/0xf8 [ohci1394]
[CFD8FEF0] [F1353290] ohci_devctl+0x88/0x530 [ohci1394]
[CFD8FF20] [F13AB034] hpsb_reset_bus+0x34/0x4c [ieee1394]
[CFD8FF30] [F13AD628] delayed_reset_bus+0xcc/0xe0 [ieee1394]
[CFD8FF40] [C004BC5C] run_workqueue+0xa4/0x110
[CFD8FF60] [C004C564] worker_thread+0xe4/0x12c
[CFD8FFB0] [C004FF54] kthread+0xd8/0x114
[CFD8FFF0] [C0013514] kernel_thread+0x44/0x60
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c0d00000f7e75b]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[003065fffeb922ae]
input: PowerMac Beep as /class/input/input5
lp: driver loaded but no devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
hdd: No disk in drive
hdd: No disk in drive
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
Adding 2031608k swap on /dev/VolGroup01/LogVol01. Priority:-2 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
eth0: Link is up at 1000 Mbps, full-duplex.
eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
audit(1166539027.083:3): avc: denied { execstack } for pid=2490 comm="mixer_applet2" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process
audit(1166539027.083:4): avc: denied { execmem } for pid=2490 comm="mixer_applet2" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process
hdd: No disk in drive
hdd: No disk in drive
hdd: No disk in drive
hdd: No disk in drive
hdd: No disk in drive
hdd: No disk in drive