Mine

root@brokenslug:~# dmesg
Linux version 2.6.14 (rwhitby@sarge) (gcc version 3.4.4) #1 Sat Nov 12 02:02:45 CST 2005
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Iomega NAS 100d
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc  noirqdebug console=ttyS0,115200n8
PID hash table entries: 512 (order: 9, 8192 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62976KB available (1635K code, 157K data, 80K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:03.0 on pci bus
dmabounce: registered device 0000:00:03.1 on pci bus
dmabounce: registered device 0000:00:03.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=128
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
8 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 8 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00240000 : "kernel"
0x00240000-0x00840000 : "filesystem"
0x00840000-0x00ec0000 : "usr"
0x00ec0000-0x00f40000 : "LudeBoot"
0x00f40000-0x00fc0000 : "sysconfig"
0x00fc0000-0x00fc1000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
0x00fe0000-0x01000000 : "FIS directory"
PCI: enabling device 0000:00:03.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:03.2, from 24 to 8
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 24, io mem 0x48020000
ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
hub 1-0:1.0: over-current change on port 1
Initializing USB Mass Storage driver...
hub 1-0:1.0: over-current change on port 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 80K
ixp400: module license 'unspecified' taints kernel.
ixp400: Module init.
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. LE
ixp400_eth: CPU clock speed (approx) = 266 MHz
[debug3] OSAL: Mapping [addr 0x60000000:size 0x4000:endianType 1]
[debug3] OSAL: Found map [[debug3] qMgr[debug3] :addr 0x60000000: virt 0x0:size 0x4000:ref 0:endianType 5]
[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 0:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 1:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 2:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8006000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 3:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8007000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 4:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8008000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 5:endianType 3]
[debug3] OSAL: Mapping [addr 0xc4000000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] Osal: Checking [phys addr 0xc8000000:size 0xc000:endianType 3]
[debug3] OSAL: Found map [[debug3] Exp Cfg[debug3] :addr 0xc4000000: virt 0xffbfd000:size 0x1000:ref 0:endianType 3]
[warning] Warning: the NPE A component you specified does not exist
[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 6:endianType 3]
[debug3] OSAL: Mapping [addr 0xc8009000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 7:endianType 3]
[debug3] OSAL: Mapping [addr 0xc800a000:size 0x1000:endianType 1]
[debug3] Osal: Checking [phys addr 0x60000000:size 0x4000:endianType 5]
[debug3] OSAL: Found map [[debug3] peripherals[debug3] :addr 0xc8000000: virt 0xffbf2000:size 0xc000:ref 8:endianType 3]
[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00221619
ixp400_eth: ixp0 is using NPEB and the PHY at address 0
ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0
ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1
NET: Registered protocol family 17
root@brokenslug:~#