Raw file loaded 0x00400000-0x004d8873, assumed entry at 0x00400000
RedBoot> exec 00 x00400000
Using base address 0x00400000 and length 0x000d8874
Uncompressing Linux............................................................ done, booting the kernel.
Linux version 2.6.14 (rwhitby@sarge) (gcc version 3.4.4) #1 Fri Nov 11 13:18:55 CST 2005
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Iomega NAS 100d
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8
Unknown boot option `x1205.hctosys=1': ignoring
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30476KB available (1644K code, 157K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PCI: IXP4xx is host
PCI: IXP4xx Using indirect access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:03.0 on pci bus
dmabounce: registered device 0000:00:03.1 on pci bus
dmabounce: registered device 0000:00:03.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
8 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 8 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00240000 : "kernel"
0x00240000-0x00840000 : "filesystem"
0x00840000-0x00ec0000 : "usr"
0x00ec0000-0x00f40000 : "LudeBoot"
0x00f40000-0x00fc0000 : "sysconfig"
0x00fc0000-0x00fc1000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
0x00fe0000-0x01000000 : "FIS directory"
PCI: enabling device 0000:00:03.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:03.2, from 25 to 9
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 25, io mem 0x48020000
ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: over-current change on port 1
Initializing USB Mass Storage driver...
hub 1-0:1.0: over-current change on port 2
usb 1-3: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:03.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
usb 1-3: device not accepting address 2, error -110
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: device not accepting address 3, error -110
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: device not accepting address 4, error -110
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: device not accepting address 5, error -110
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
jffs2: Too few erase blocks (4)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)