Mine

Raw file loaded 0x00400000-0x004d8873, assumed entry at 0x00400000
RedBoot> exec 0x00400000
Using base address 0x00400000 and length 0x000d8874
Uncompressing Linux............................................................ done, booting the kernel.

Linux version 2.6.14 (rwhitby@sarge) (gcc version 3.4.4) #1 Fri Nov 11 13:18:55 CST 2005

CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)

Machine: Iomega NAS 100d

Memory policy: ECC disabled, Data cache writeback

CPU0: D VIVT undefined 5 cache

CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Built 1 zonelists

Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8

Unknown boot option `x1205.hctosys=1': ignoring

PID hash table entries: 256 (order: 8, 4096 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 32MB = 32MB total

Memory: 30476KB available (1644K code, 157K data, 80K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

PCI: IXP4xx is host

PCI: IXP4xx Using indirect access for memory space

PCI: bus0: Fast back to back transfers disabled

dmabounce: registered device 0000:00:01.0 on pci bus

dmabounce: registered device 0000:00:02.0 on pci bus

dmabounce: registered device 0000:00:03.0 on pci bus

dmabounce: registered device 0000:00:03.1 on pci bus

dmabounce: registered device 0000:00:03.2 on pci bus

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

IXP4xx Watchdog Timer: heartbeat 60 sec

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale

ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale

io scheduler noop registered

io scheduler deadline registered

RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize

IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank

 Intel/Sharp Extended Query Table at 0x0031

Using buffer write method

cfi_cmdset_0001: Erase suspend on write enabled

Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000

8 RedBoot partitions found on MTD device IXP4XX-Flash.0

Creating 8 MTD partitions on "IXP4XX-Flash.0":

0x00000000-0x00040000 : "RedBoot"

0x00040000-0x00240000 : "kernel"

0x00240000-0x00840000 : "filesystem"

0x00840000-0x00ec0000 : "usr"

0x00ec0000-0x00f40000 : "LudeBoot"

0x00f40000-0x00fc0000 : "sysconfig"

0x00fc0000-0x00fc1000 : "RedBoot config"

mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only

0x00fe0000-0x01000000 : "FIS directory"

PCI: enabling device 0000:00:03.2 (0140 -> 0142)

PCI: Via IRQ fixup for 0000:00:03.2, from 25 to 9

ehci_hcd 0000:00:03.2: EHCI Host Controller

ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:03.2: irq 25, io mem 0x48020000

ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 4 ports detected

hub 1-0:1.0: over-current change on port 1

Initializing USB Mass Storage driver...

hub 1-0:1.0: over-current change on port 2

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

NET: Registered protocol family 2

IP route cache hash table entries: 512 (order: -1, 2048 bytes)

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

TCP bic registered

NET: Registered protocol family 1

jffs2: Too few erase blocks (4)

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)