rendered paste bodydion@debian:/tmp% nc phone 911
id
uid=0(root) gid=0 groups=0
uname -a
Linux debian 2.6.16.13-ezx6 #8 Sun Dec 17 16:31:07 EET 2006 armv5tel GNU/Linux
cat /proc/cpuinfo
Processor : XScale-PXA270 rev 7 (v5l)
BogoMIPS : 291.63
Features : swp half thumb fastmult edsp
CPU implementer : 0x69
CPU architecture: 5TE
CPU variant : 0x0
CPU part : 0x411
CPU revision : 7
Cache type : undefined 5
Cache clean : undefined 5
Cache lockdown : undefined 5
Cache format : Harvard
I size : 32768
I assoc : 32
I line length : 32
I sets : 32
D size : 32768
D assoc : 32
D line length : 32
D sets : 32
Hardware : Motorola Ezx Platform
Revision : 0000
Serial : 0000000000000000
cat /proc/meminfo
MemTotal: 30260 kB
MemFree: 22104 kB
Buffers: 0 kB
Cached: 5560 kB
SwapCached: 0 kB
Active: 4356 kB
Inactive: 1988 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 30260 kB
LowFree: 22104 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 2416 kB
Slab: 1136 kB
CommitLimit: 15128 kB
Committed_AS: 2368 kB
PageTables: 92 kB
VmallocTotal: 614400 kB
VmallocUsed: 8 kB
VmallocChunk: 614392 kB
dmesg
Linux version 2.6.16.13-ezx6 (dion@debian) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #8 Sun Dec 17 16:31:07 EET 2006
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE)
Machine: Motorola Ezx Platform
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 8192
DMA zone: 8192 pages, LIFO batch:1
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Run Mode clock: 195.00MHz (*15)
Turbo Mode clock: 292.50MHz (*1.5, active)
Memory clock: 195.00MHz (/2)
System bus clock: 195.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: mem=32M ip=192.168.1.2:192.168.1.1:192.168.1.1:255.255.255.0:ezx:usb0:off console=tty0 root=/dev/nfs nfsroot=192.168.1.1:/home/rootfs,nolock rootdelay=5 2 rw
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 30x80
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30148KB available (1720K code, 430K data, 92K init)
Calibrating delay loop... 291.63 BogoMIPS (lpj=1458176)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
write 0x0003ffff to register 1
Read from Register 1: 0x0003ffff
write 0x0013ffff to register 1
Read from Register 0: 0x00000884
Read from Register 1: 0x0013ffff
Read from Register 2: 0x002206c0
Read from Register 6: 0x00000000
Read from Register 7: 0x00025052
Read from Register 8: 0x00200000
Read from Register 9: 0x00200000
Read from Register 10: 0x00000000
Read from Register 11: 0x00000007
Read from Register 12: 0x00030000
Read from Register 13: 0x00019701
Read from Register 20: 0x000000a4
Read from Register 21: 0x00000000
Read from Register 24: 0x00d55500
Read from Register 26: 0x00000000
Read from Register 27: 0x00000100
write 0x00000040 to register 0
write 0x0013ffbf to register 1
write 0x00000200 to register 0
write 0x0013fdbf to register 1
write 0x00030000 to register 12
write 0x00325052 to register 7
write 0x00325052 to register 7
write 0x00d55100 to register 24
write 0x00d55100 to register 24
write 0x00d55100 to register 24
write 0x00d55100 to register 24
write 0x00d55100 to register 24
write 0x00d57100 to register 24
write 0x00d57100 to register 24
write 0x00d57100 to register 24
write 0x00000004 to register 6
write 0x00000004 to register 6
write 0x00000084 to register 6
write 0x00000084 to register 6
write 0x0000008c to register 6
write 0x0000208c to register 6
write 0x000020ac to register 6
write 0x000020ac to register 6
write 0x00325052 to register 7
write 0x00325052 to register 7
write 0x00d57101 to register 24
write 0x00d57103 to register 24
write 0x00325052 to register 7
Read from Register 2: 0x002206c0
write 0x000002a4 to register 20
write 0x000002a4 to register 20
write 0x000002b4 to register 20
pxa-spi pxa-spi: registered master spi1
pxa-spi pxa-spi: registered child spi1.0
ezx_pcap_probe entered
NetWinder Floating Point Emulator V0.97 (double precision)
Initializing Cryptographic API
io scheduler noop registered (default)
ezx_set_intensity to 25
backlight last intensity was 0, new intensity is 25
backlight power ON
EZX Backlight Driver Initialized.
pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878
pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008
Console: switching to colour frame buffer device 60x53
SA1100 Real Time Clock driver v1.02
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
pxa27x_udc: version 21-Jul-2005
USB cmd disconnect
Read from Register 2: 0x002206c0
Read from Register 20: 0x000002b4
write 0x000002b0 to register 20
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1
usb0: MAC d2:ec:02:07:bf:67
USB cmd connect
write 0x000002b4 to register 20
Read from Register 2: 0x002206c0
input: PXA Keyboard as /class/input/input0
write 0x00000000 to register 9
write 0x00100000 to register 0
write 0x00000002 to register 0
write 0x0013fdbd to register 1
write 0x0003fdbd to register 1
write 0x00000000 to register 10
write 0x00000000 to register 10
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x00000000 to register 9
write 0x000a0000 to register 9
input: EZX PCAP2 Touchscreen as /class/input/input1
i2c /dev entries driver
: Enabling slave mode
udc: USB reset
udc: USB reset
udc: USB reset
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
: i2c_pxa_set_slave: wait timedout
I2C: i2c-0: PXA I2C adapter, slave address 1
ezx_mci_init entered
ezx_mci_setpower(vdd=15) entered
Read from Register 7: 0x00325052
write 0x00325072 to register 7
Registered led device: e680:red
Registered led device: e680:green
Registered led device: e680:blue
Registered led device: e680:keypad
NET: Registered protocol family 2
ezx_mci_setpower(vdd=15) entered
Read from Register 7: 0x00325072
write 0x00325072 to register 7
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ezx_mci_get_ro entered
mmcblk0: mmc0:b368 SDC 2009600KiB
mmcblk0:<3>mmcblk0: error 2 transferring data
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: error 1 sending read/write command
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
unable to read partition table
IP-Config: Complete:
device=usb0, addr=192.168.1.2, mask=255.255.255.0, gw=192.168.1.1,
host=ezx, domain=, nis-domain=(none),
bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
Waiting 5sec before mounting root device...
Looking up port of RPC 100003/2 on 192.168.1.1
Looking up port of RPC 100005/1 on 192.168.1.1
VFS: Mounted root (nfs filesystem).
Freeing init memory: 92K
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
nfs: server 192.168.1.1 not responding, still trying
nfs: server 192.168.1.1 OK
mount
rootfs on / type rootfs (rw)
/dev/root on / type nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.1)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid)
proc on /proc type proc (rw,nosuid,nodev,noexec)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)