rendered paste bodylsmod (/bin/lsmod):Module Size Used bynls_iso8859_1 4256 1 isofs 32540 1 udf 73156 0 binfmt_misc 10984 1 ppdev 8676 0 parport_pc 32164 0 lp 11012 0 parport 33256 3 ppdev,parport_pc,lpbutton 6672 0 ac 5188 0 battery 9636 0 sata_sil 11464 0 libata 89332 1 sata_silscsi_mod 124168 1 libatadm_snapshot 15520 0 dm_mirror 19152 0 dm_mod 50232 2 dm_snapshot,dm_mirrorloop 15048 0 pcmcia 34108 0 snd_atiixp 18028 1 snd_atiixp_modem 14856 0 snd_ac97_codec 83104 2 snd_atiixp,snd_atiixp_modemsnd_ac97_bus 2400 1 snd_ac97_codecsnd_pcm_oss 38368 0 snd_mixer_oss 15200 1 snd_pcm_osstsdev 7520 0 bcm43xx 403936 0 joydev 9088 0 firmware_class 9600 2 pcmcia,bcm43xxsnd_pcm 68644 4 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_osssnd_timer 20996 1 snd_pcmieee80211softmac 26656 1 bcm43xxi2c_piix4 8140 0 ati_agp 8652 0 agpgart 29896 1 ati_agpshpchp 33024 0 pci_hotplug 28704 1 shpchpsnd 47012 9 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timersoundcore 9248 1 sndyenta_socket 24460 1 rsrc_nonstatic 11840 1 yenta_socketpcmcia_core 36852 3 pcmcia,yenta_socket,rsrc_nonstaticusbhid 37248 0 ieee80211 29416 2 bcm43xx,ieee80211softmaci2c_core 19680 1 i2c_piix4pcspkr 3072 0 snd_page_alloc 9640 3 snd_atiixp,snd_atiixp_modem,snd_pcmieee80211_crypt 5952 1 ieee80211psmouse 35016 0 serio_raw 6660 0 evdev 9088 2 rtc 12372 0 ext3 119208 1 jbd 52456 1 ext3mbcache 8356 1 ext3ide_cd 36064 1 cdrom 32544 1 ide_cdide_disk 14848 3 ohci_hcd 18276 0 ehci_hcd 28136 0 usbcore 112676 4 usbhid,ohci_hcd,ehci_hcdatiixp 5904 0 [permanent]generic 5028 0 [permanent]ide_core 110504 4 ide_cd,ide_disk,atiixp,generic8139cp 21920 0 8139too 25120 0 mii 5344 2 8139cp,8139toothermal 13608 0 processor 28840 1 thermalfan 4804 0 uname (/bin/uname -a):Linux serenity 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 GNU/Linuxdmesg (/bin/dmesg):Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable) BIOS-e820: 0000000037ef0000 - 0000000037eff000 (ACPI data) BIOS-e820: 0000000037eff000 - 0000000037f00000 (ACPI NVS) BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)0MB HIGHMEM available.894MB LOWMEM available.found SMP MP-table at 000f8130On node 0 totalpages: 229104 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225008 pages, LIFO batch:31DMI present.ACPI: RSDP (v000 HP ) @ 0x000f8080ACPI: RSDT (v001 HP 3097 0x20040525 LTP 0x00000000) @ 0x37ef8bcfACPI: FADT (v001 HP 3097 0x20040525 PTL 0x0000005f) @ 0x37efee2aACPI: SSDT (v001 PTLTD POWERNOW 0x20040525 LTP 0x00000001) @ 0x37efee9eACPI: MADT (v001 PTLTD 3097 0x20040525 LTP 0x00000000) @ 0x37efef74ACPI: MCFG (v001 PTLTD MCFG 0x20040525 LTP 0x00000000) @ 0x37efefc4ACPI: DSDT (v001 HP 3091 0x20040525 MSFT 0x0100000e) @ 0x00000000ATI board detected. Disabling timer routing over 8254.ACPI: PM-Timer IO Port: 0x8008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 15:12 APIC version 16ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 50000000 (gap: 40000000:bec00000)Detected 1794.828 MHz processor.Built 1 zonelists. Total pages: 229104Kernel command line: root=/dev/hda5 ro mapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Console: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 900792k/916416k available (1543k kernel code, 15036k reserved, 574k data, 196k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 3593.48 BogoMIPS (lpj=7186977)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Capability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 256K (64 bytes/line)CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.Compat vDSO mapped to ffffe000.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeFreeing SMP alternatives: 16k freedACPI: Core revision 20060707CPU0: AMD Mobile AMD Sempron(tm) Processor 3100+ stepping 02Total of 1 processors activated (3593.48 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Brought up 1 CPUsmigration_cost=0checking if image is initramfs... it isFreeing initrd memory: 4395k freedNET: Registered protocol family 16ACPI: bus type pci registeredPCI: BIOS Bug: MCFG area at e0000000 is not E820-reservedPCI: Not using MMCONFIG.PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5PCI: Using configuration type 1Setting up standard PCI resourcesACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1Boot video device is 0000:01:05.0PCI: Transparent bridge - 0000:00:14.4PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')Please report the result to linux-kernel to fix this permanentlyACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 10 devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportpnp: 00:08: ioport range 0x1080-0x1080 has been reservedpnp: 00:08: ioport range 0x220-0x22f has been reservedpnp: 00:08: ioport range 0x40b-0x40b has been reservedpnp: 00:08: ioport range 0x4d0-0x4d1 has been reservedPCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: c0100000-c01fffff PREFETCH window: c8000000-cfffffffPCI: Bus 6, cardbus bridge: 0000:05:09.0 IO window: 0000a400-0000a4ff IO window: 0000a800-0000a8ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffffPCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: c0200000-c02fffff PREFETCH window: 50000000-51ffffffACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185PCI: Setting latency timer of device 0000:05:09.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredaudit: initializing netlink socket (disabled)audit(1166451892.784:1): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)isapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185ACPI: PCI interrupt for device 0000:00:14.6 disabledRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizePNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12serio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1mice: PS/2 mouse device common for all miceTCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8NET: Registered protocol family 20Using IPI No-Shortcut modeACPI: (supports S0 S3 S4 S5)Freeing unused kernel memory: 196k freedTime: tsc clocksource has been installed.input: AT Translated Set 2 keyboard as /class/input/input0ACPI: CPU0 (power states: C1[C1] C2[C2])ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: Thermal Zone [THRM] (54 C)8139too Fast Ethernet driver 0.9.27ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 193eth0: RealTek RTL8139 at 0xa000, 00:16:36:54:15:71, IRQ 193eth0: Identified 8139 chip type 'RTL-8100B/8139D'8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxATIIXP: IDE controller at PCI slot 0000:00:14.1ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 201ATIIXP: chipset revision 0ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pioProbing IDE interface ide0...usbcore: registered new driver usbfsusbcore: registered new driver hubohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)Time: acpi_pm clocksource has been installed.hda: ST960812A, ATA DISK driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...hdc: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM driveide1 at 0x170-0x177,0x376 on irq 15ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 209ehci_hcd 0000:00:13.2: EHCI Host Controllerehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:13.2: irq 209, io mem 0xc0002000ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 8 ports detectedhda: max request size: 128KiBhda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)hda: cache flushes supported hda: hda1 hda2 < hda5 hda6<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 209ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:13.0: irq 209, io mem 0xc0000000 hda7 >hdc: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMAUniform CD-ROM driver Revision: 3.20usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 4 ports detectedACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 209ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:13.1: irq 209, io mem 0xc0001000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 4 ports detectedAttempting manual resumekjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.usb 3-1: new low speed USB device using ohci_hcd and address 2usb 3-1: configuration #1 chosen from 1 choiceReal Time Clock Driver v1.12acieee80211_crypt: registered algorithm 'NULL'input: PC Speaker as /class/input/input1ieee80211: 802.11 data/management/control stack, git-1.1.13ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0usbcore: registered new driver hiddevinput: Logitech Optical USB Mouse as /class/input/input2input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driverinput: SynPS/2 Synaptics TouchPad as /class/input/input3Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]Yenta: Enabling burst memory read transactionsYenta: Using CSCINT to route CSC interrupts to PCIYenta: Routing CardBus interrupts to PCIYenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x66pci_hotplug: PCI Hot Plug PCI Core version: 0.5Linux agpgart interface v0.101 (c) Dave JonesYenta: ISA IRQ mask 0x0ee8, PCI irq 185Socket status: 30000006Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafffcs: IO port probe 0xa000-0xafff: clean.pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffffpcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffffshpchp: Standard Hot Plug PCI Controller Driver version: 0.4piix4_smbus 0000:00:14.0: Found 0000:00:14.0 devicebcm43xx driverACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 217bcm43xx: Chip ID 0x4318, rev 0x2bcm43xx: Number of cores: 4bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabledbcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabledbcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabledbcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabledbcm43xx: PHY connectedbcm43xx: Detected PHY: Version: 3, Type 2, Revision 7bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)bcm43xx: Radio turned offbcm43xx: Radio turned offts: Compaq touchscreen protocol outputPCI: Enabling device 0000:00:14.6 (0010 -> 0012)ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185MC'97 0 converters and GPIO not ready (0x1)ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185cs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: clean.cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87fcs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdfcs: IO port probe 0xa00-0xaff: clean.Adding 1012052k swap on /dev/hda7. Priority:-1 extents:1 across:1012052kEXT3 FS on hda5, internal journalloop: loaded (max 8 devices)device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.compcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.SCSI subsystem initializedlibata version 2.00 loaded.bcm43xx: PHY connectedbcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)bcm43xx: Radio turned onbcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()bcm43xx: Chip initializedbcm43xx: 32-bit DMA initializedbcm43xx: Keys clearedbcm43xx: Selected 802.11 core (phytype 2)bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()SoftMAC: Open Authentication completed with 00:0e:2e:67:00:83ACPI: Battery Slot [BAT1] (battery present)ACPI: AC Adapter [ACAD] (on-line)ACPI: Power Button (FF) [PWRF]ACPI: Power Button (CM) [PWRB]ACPI: Sleep Button (CM) [SLPB]ACPI: Lid Switch [LID]lp: driver loaded but no devices foundppdev: user-space parallel port driverISO 9660 Extensions: Microsoft Joliet Level 1ISOFS: changing to secondary root