Something
public text v1 · immutable
(AVM) EVA Revision: 1.123 Version: 1123
(C) Copyright 2005 AVM Date: Nov 10 2005 Time: 12:04:41 (3) 2 0-1101
[FLASH:] MACRONIX Top-MirrorBit-Flash 4MB 32 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 63 sectors a 64kB)
[FLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz
AVM_Ar7 >
[cpmac]<no link>
[cpmac]<found link>
AVM decompress Kernel:
...........done
start kernel
LINUX started...
Config serial console: ttyS0,38400
MDIX enabled.
prom_init: local_env_buffer 952 used (max 2048)
CPU revision is: 00018448
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 8kb, linesize 16 bytes (4 ways)
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (jpluschke@EmbeddedVM) (gcc version6
Reset Status: SW reset 1
DEBUG: Bring MDIO out of reset.
Determined physical RAM map:
memory: 14000000 @ 00000000 (reserved)
memory: 00020000 @ 14000000 (ROM data)
memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 00102c00(1059840)
CPU frequency 211.97 MHz
Calibrating delay loop... 211.35 BogoMIPS
Freeing Adam2 reserved memory [0x14001000,0x0001f000]
Memory: 14572k/16384k available (1270k kernel code, 1812k reserved, 83k data, 4)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2b (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
[avm] configured: watchdog (module) eventled enable direct gpio
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: May 24 2006 15:41)
block: 64 slots per queue, batch=16
Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
resize flash to 0x400000 Bytes
avalanche flash device: 0x400000 at 0x10000000.
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
Looking for mtd device :mtd0:
Looking for mtd device :mtd1:
Looking for mtd device :mtd2:
Looking for mtd device :mtd3:
Looking for mtd device :mtd4:
Looking for mtd device :mtd5:
mtd mtd5 not found
flash: mtd[0] 0x90000000 - 0x90000000
flash: mtd[1] 0x90010000 - 0x903C0000
flash: mtd[2] 0x90000000 - 0x90010000
flash: mtd[3] 0x903C0000 - 0x903E0000
flash: mtd[4] 0x903E0000 - 0x90400000
flash: mtd[5] 0x00000000 - 0x00000000
[_4_1_mtd_Xmb]:
search for Squash Fs image: 0x90010000 - 0x903c0000
SquashFs image found at 0x90078400
[add_partition] mtd0: 0x90078400 - 0x903c0000 (root filesystem)
Found a mtd0 image (0x78400), with size (0x347c00).
Creating 1 MTD partitions on "Physically mapped flash":
0x00078400-0x003c0000 : "mtd0"
mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-ony
[add_partition] mtd1: 0x90010000 - 0x903c0000 (kernel)
Found a mtd1 image (0x10000), with size (0x3b0000).
Creating 1 MTD partitions on "Physically mapped flash":
0x00010000-0x003c0000 : "mtd1"
[add_partition] mtd2: 0x90000000 - 0x90010000 (urlader)
Found a mtd2 image (0x0), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash":
0x00000000-0x00010000 : "mtd2"
[add_partition] mtd3: 0x903c0000 - 0x903e0000 (tffs)
Found a mtd3 image (0x3c0000), with size (0x20000).
Creating 1 MTD partitions on "Physically mapped flash":
0x003c0000-0x003e0000 : "mtd3"
[add_partition] mtd4: 0x903e0000 - 0x90400000 (tffs)
Found a mtd4 image (0x3e0000), with size (0x20000).
Creating 1 MTD partitions on "Physically mapped flash":
0x003e0000-0x00400000 : "mtd4"
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd3 and mtd4 (double buffering)
Adam2 environment variables API installed.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
root device=/dev/mtdblock/0
Mounted devfs on /dev
Freeing unused kernel memory: 48k freed
[sys_reboot]: cmd=0x0
init started: BusyBox v1.00-pre3 (2006.03.24-08:21+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
AR7WDT: System Init UEberwachung 120 Sekunden
*************************************
**** adam2 environment ****
HWRevision 93
ProductID Fritz_Box_SpeedportW501V
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.123
bootserport tty0
bluetooth 00:
cpufrequency 211968000
firstfreeaddress 0x946AD100
firmware_version tcom
firmware_info 28.04.07
flashsize 0x00400000
maca 00:
macb 00:
macwlan 00:
macdsl 00:
memsize 0x01000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x903C0000
mtd2 0x90000000,0x90010000
mtd3 0x903C0000,0x903E0000
mtd4 0x903E0000,0x90400000
my_ipaddress 192.168.178.1
prompt AVM_Ar7
ptest
reserved 00:04:0E:FF:FF:00
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1123
usb_board_mac
usb_rndis_mac
usb_device_id 0x5401
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_cal 0009,0017,0018,00F3,010A,0100,010A,0319,033F
*************************************
HWRevision='93'
HWRevision_ATA='1'
HWRevision_BitFileCount=''
HWRevision_Reserved1='0'
ANNEX='B'
OEM='tcom'
Language='de'
Country='049'
TZ='CET-1CEST,M3.5.0,M10.5.0'
CONFIG_AB_COUNT='2'
CONFIG_ANNEX='B'
CONFIG_ASSIST='y'
CONFIG_ATA='n'
CONFIG_ATA_FULL='n'
CONFIG_AUDIO='n'
CONFIG_AURA='n'
CONFIG_BLUETOOTH='n'
CONFIG_BLUETOOTH_CTP='n'
CONFIG_BUTTON='n'
CONFIG_CAPI='y'
CONFIG_CAPI_MIPS='n'
CONFIG_CAPI_NT='n'
CONFIG_CAPI_POTS='y'
CONFIG_CAPI_TE='n'
CONFIG_CAPI_UBIK='n'
CONFIG_CAPI_XILINX='y'
CONFIG_CDROM='n'
CONFIG_CDROM_FALLBACK='n'
CONFIG_DECT='n'
CONFIG_DSL='y'
CONFIG_ENVIRONMENT_PATH='/proc/sys/dev/adam2'
CONFIG_ETH_COUNT='1'
CONFIG_FIRMWARE_URL='http://www.telekom.de/faq'
CONFIG_FON='y'
CONFIG_HOMEI2C='n'
CONFIG_HOSTNAME='speedport.ip'
CONFIG_I2C='n'
CONFIG_INSTALL_TYPE='ar7_4MB_1eth_2ab_pots_wlan_28776'
CONFIG_JFFS2='n'
CONFIG_LED_NO_DSL_LED='n'
CONFIG_MAILER='n'
CONFIG_MEDIACLI='n'
CONFIG_MEDIASRV='n'
CONFIG_NAND='n'
CONFIG_NFS='n'
CONFIG_OEM_DEFAULT='tcom'
CONFIG_PRODUKT='Fritz_Box_SpeedportW501V'
CONFIG_PRODUKT_NAME='Speedport W 501V'
CONFIG_RAMSIZE='16'
CONFIG_ROMSIZE='4'
CONFIG_SERVICEPORTAL_URL='none'
CONFIG_STOREUSRCFG='y'
CONFIG_SUBVERSION=''
CONFIG_TAM='n'
CONFIG_TAM_MODE='0'
CONFIG_TR069='n'
CONFIG_UBIK2='n'
CONFIG_UPNP='y'
CONFIG_USB='n'
CONFIG_USB_HOST_AVM='n'
CONFIG_USB_HOST_TI='n'
CONFIG_USB_PRINT_SERV='n'
CONFIG_USB_STORAGE='n'
CONFIG_USB_WLAN_AUTH='n'
CONFIG_VDSL='n'
CONFIG_VERSION='04.07'
CONFIG_VERSION_MAJOR='28'
CONFIG_VLYNQ='y'
CONFIG_VLYNQ0='3'
CONFIG_VLYNQ1='0'
CONFIG_VLYNQ_PARAMS='vlynq_reset_bit_0=17'
CONFIG_VPN='n'
CONFIG_WLAN='y'
CONFIG_WLAN_1130TNET='n'
CONFIG_WLAN_1350TNET='y'
CONFIG_WLAN_GREEN='n'
CONFIG_WLAN_WDS='y'
CONFIG_XILINX='y'
*************************************
set 'Activate Wizzard'
mknod: /var/flash/ar7.cfg: File exists
ln -s /etc/default.049/fx_moh.default /var/fx_moh
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/char/Piglet/Pigo
Warning: loading Piglet will taint the kernel: non-GPL license -
(C) Copyright 2005 by AVM
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
c0005060 __insmod_Piglet_S.text_L1648 [Piglet]
c0005710 __insmod_Piglet_S.data_L320 [Piglet]
c00056f0 __insmod_Piglet_S.rodata_L32 [Piglet]
c0005000 __insmod_Piglet_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/dri]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/net/avalanche_co
Warning: loading avalanche_cpmac will taint the kernel: non-GPL license -
(C) Copyright 2003, Texas Instrumentcpmac .bss-address: 0xc0031c5c (&cpmac_cpu_)
s, Inc
(C) Copyright 2004, AVM
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
eth0 irq= 0 io=a8610000
Installed 1 cpmac instances.
c002e300 __insmod_avalanche_cpmac_S.rodata_L11872 [avalanche_cpmac]
c0020060 __insmod_avalanche_cpmac_S.text_L57984 [avalanche_cpmac]
c0020000 __insmod_avalanche_cpmac_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/k]
c0031160 __insmod_avalanche_cpmac_S.data_L832 [avalanche_cpmac]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/char/avalanche_o
Warning: loading avalanche_vlynqvlynq_dev_init: 1/1 VLYNQs, mask 0x0001
will taint the GPIO pin reset, bit 17
kernel: non-GPL Setup registers for VLYNQ0
license - (C) CoSet local_mem.RxSize to 0x1000000
pyright 2003, TeVLYNQ_TXMAP_REG = 4000000
xas Instruments,VLYNQ_R_RXMAP_OFFSET_REG(map=1) = 0
Inc
(C) CopyriVLYNQ_R_RXMAP_SIZE_REG(map=1) = 80000
ght 2004, AVM
VLYNQ_R_RXMAP_OFFSET_REG(map=2) = 300000
See http://www.VLYNQ_R_RXMAP_SIZE_REG(map=2) = 100000
tux.org/lkml/#exVLYNQ_R_TXMAP_REG = 60000000
port-tainted forVLYNQ_RXMAP_OFFSET_REG(map=1) = 14000000
information aboVLYNQ_RXMAP_SIZE_REG(map=1) = 1000000
ut tainted modulVLYNQ_REV_REG = 10205
es
VLYNQ0: init succeeded!
vlynq init done
VLYNQ0: Misc device vlynq0 registered, minor #63. (0)
VLYNQ0: Running on IRQ 29.
c0033000 __insmod_avalanche_vlynq_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/k]
c0033060 __insmod_avalanche_vlynq_S.text_L7808 [avalanche_vlynq]
c0034f00 __insmod_avalanche_vlynq_S.rodata_L2064 [avalanche_vlynq]
c0035a10 __insmod_avalanche_vlynq_S.data_L768 [avalanche_vlynq]
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o
Warning: loading tiatm will taint the kernel: non-GPL license -
(C) Copyright 2003, Texas Instruments, Inc
(Cregistered device TI Avalanche SAR
) Copyright 2004tiatm driver (patch_annex=0xc004cb60)
, AVM
See hDSP binary filesize = 311388 bytes
ttp://www.tux.org/lkml/#export-tainted for information about tainted modules
#### boostVoltage: DSP Core voltage set to 1,5 V ####
avm event register
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.06.04.29]
c0038000 __insmod_tiatm_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/driv]
c0038060 __insmod_tiatm_S.text_L69456 [tiatm]
c0048fd0 __insmod_tiatm_S.rodata_L7776 [tiatm]
c004b0a0 __insmod_tiatm_S.data_L6848 [tiatm]
attempting to start ubik2 driver @ Fritz_Box_SpeedportW501V ...
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/char/ubik2/ubiko
Warning: loading ubik2 will taint the kernel: non-GPL license -
(C) Copyright ubik2 driver (ubik2 - 0x10=0xc005b3c0)
UbikPrintf = 0x
See http://c0058ac0
www.tux.org/lkmlatm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0050b0c
/#export-taintedatm_dsp_register_ubik2: dsp mem pointer 0xa1c0ed40
for information about tainted modules
c0050000 __insmod_ubik2_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/driv]
c0050060 __insmod_ubik2_S.text_L35472 [ubik2]
c0058b10 __insmod_ubik2_S.rodata_L9328 [ubik2]
c005b1e0 __insmod_ubik2_S.data_L464 [ubik2]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/isdn/avmb1/capio
capifs: Rev 1.1.4.1
c0071000 __insmod_capifs_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/dri]
c0071060 __insmod_capifs_S.text_L3632 [capifs]
c0071eb0 __insmod_capifs_S.rodata_L224 [capifs]
c00720b0 __insmod_capifs_S.data_L272 [capifs]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/isdn/avmb1/capio
c0074000 __insmod_capiutil_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/d]
c0074060 __insmod_capiutil_S.text_L3888 [capiutil]
c0074fb0 __insmod_capiutil_S.rodata_L1920 [capiutil]
c00758f0 __insmod_capiutil_S.data_L1216 [capiutil]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/isdn/avmb1/kerno
CAPI-driver Rev 1.1.4.1: loaded
c0079000 __insmod_kernelcapi_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel]
c0079060 __insmod_kernelcapi_S.text_L16032 [kernelcapi]
c007cf20 __insmod_kernelcapi_S.rodata_L2320 [kernelcapi]
c007d9b0 __insmod_kernelcapi_S.data_L304 [kernelcapi]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/isdn/avmb1/capio
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
c0087960 __insmod_capi_S.rodata_L1072 [capi]
c0083000 __insmod_capi_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drive]
c0083060 __insmod_capi_S.text_L18656 [capi]
c0087d90 __insmod_capi_S.data_L224 [capi]
c0074000 __insmod_capiutil_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/d]
c0074060 __insmod_capiutil_S.text_L3888 [capiutil]
c0074fb0 __insmod_capiutil_S.rodata_L1920 [capiutil]
c00758f0 __insmod_capiutil_S.data_L1216 [capiutil]
c0071000 __insmod_capifs_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/dri]
c0071060 __insmod_capifs_S.text_L3632 [capifs]
c0071eb0 __insmod_capifs_S.rodata_L224 [capifs]
c00720b0 __insmod_capifs_S.data_L272 [capifs]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/isdn/isdn_fon4/o
Warning: loading isdn_fbox will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
isdn_fbox: AVM F!Box driver, revision 1.7 #1159
isdn_fbox: (isdn_fbox built on May 24 2006 at 15:42:46)
isdn_fbox: Loading...
isdn_fbox: Driver 'isdn_fbox' attached to stack
kcapi: driver isdn_fbox attached
isdn_fbox: Auto-attaching with io 0x0, irq 0...
isdn_fbox: Stack version 3.11-07
kcapi: Controller 1: fritz-ar7 attached
kcapi: Controller 2: fritz-ar7 attached
kcapi: Controller 3: fritz-ar7 attached
kcapi: Controller 4: fritz-ar7 attached
kcapi: Controller 5: fritz-ar7 attached
kcapi: card 1 "fritz-ar7" ready.
kcapi: card 2 "fritz-ar7" ready.
kcapi: notify up contr 1
capi: controller 1 up
kcapi: card 3 "fritz-ar7" ready.
kcapi: notify up contr 2
capi: controller 2 up
kcapi: card 4 "fritz-ar7" ready.
kcapi: notify up contr 3
capi: controller 3 up
kcapi: card 5 "fritz-ar7" ready.
kcapi: notify up contr 4
capi: controller 4 up
isdn_fbox: Loaded.
kcapi: notify up contr 5
capi: controller 5 up
c008a000 __insmod_isdn_fbox_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/]
c008a060 __insmod_isdn_fbox_S.text_L436080 [isdn_fbox]
c00f47f0 __insmod_isdn_fbox_S.rodata_L48992 [isdn_fbox]
c0100750 __insmod_isdn_fbox_S.data_L12864 [isdn_fbox]
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/dsld/kdsldmod.o
Warning: loading kdsldmod will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
kdsldmod: init start
kdsld: cache_create(datapipe)
kdsld: cache_create(datapipe_mod)
kdsld: cache_create(ipaccessset)
kdsld: cache_create(ipaccessrule)
kdsld: cache_create(ipfragid)
kdsld: cache_create(ipmasqentry)
kdsld: cache_create(ipmasqfwinfo)
kdsld: cache_create(ipmasqigdpm)
kdsld: cache_create(ipmasqappldata)
kdsld: cache_create(ipmasqmcgroup)
kdsld: cache_create(dnsmasqentry)
kdsld: cache_create(dnsstaticentry)
kdsld: cache_create(pingerentry)
kdsld: cache_create(pingerwaiter)
kdsld: cache_create(iprouteset)
kdsld: DATAPIPE: with header optimization
kdsldmod: init done
kdsld: PPP led: off (value=0)
c017b000 __insmod_kdsldmod_O/lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/d]
c017b060 __insmod_kdsldmod_S.text_L336688 [kdsldmod]
c01cd3b0 __insmod_kdsldmod_S.rodata_L26624 [kdsldmod]
c01d3d40 __insmod_kdsldmod_S.data_L58496 [kdsldmod]
2002-09-08 14:00:21 cltmgr: csock: using poll
Sep 8 14:00:21 cltmgr[350]: csock: using poll
2002-09-08 14:00:21 cltmgr: Couldn't load shared library libavmssl.so - File n)
Sep 8 14:00:21 cltmgr[350]: Couldn't load shared library libavmssl.so - File )
2002-09-08 14:00:21 cltmgr: process priority is 19
Sep 8 14:00:21 cltmgr[350]: process priority is 19
MAC WLAN:
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/wlan/tiap.o
Warning: loading tiap will taint the kernel: non-GPL license -
(C) Copyright 2003, 2004, Texas Instruments, Inc
(C) Copyright 2005, AVM
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
-------------------------
| APDK version 6.4.3.26 |
| Compiled for TNETW1150 |
| Kernel 2.4 |
-------------------------
Sep 8 14:00:23 cltmgr[357]: FactoryDefault=/etc/default/tcom/tr069.cfg (tr069)
Sep 8 14:00:23 cltmgr[357]: load_config(tr069): factory default loaded
Sep 8 14:00:23 cltmgr[357]: TR-069 is NOT ACTIVATED in tr069.cfg
Sep 8 14:00:23 cltmgr[357]: mapping to info-LED already exist
Sep 8 14:00:23 cltmgr[357]: box init ok
kcapi: appl 1 up
Sep 8 14:00:23 cltmgr[357]: 14:00:23(1) [Bus error] ctlmgr(357) CRASHED at 2b0)
Sep 8 14:00:23 cltmgr[357]: [bt] Number of functions: (8)
Sep 8 14:00:23 cltmgr[357]: [bt] 2b004bb8+84 (/usr/share/ctlmgr/libfon.so at 0)
kcapi: appl 1 downtmgr[357]: [bt] 2b004d98+40 (/usr/share/ctlmgr/libfon.so at 0)
Sep 8 14:00:23 cltmgr[357]: [bt] 2b003310+32 (/usr/share/ctlmgr/libfon.so at 0)
Sep 8 14:00:23 cltmgr[357]: [bt] 2b00334c+40 (/usr/share/ctlmgr/libfon.so at 0)
Sep 8 14:00:23 cltmgr[357]: [bt] 2b00338c+84 (/usr/share/ctlmgr/libfon.so at 0)
Sep 8 14:00:23 cltmgr[357]: [bt] 0042b780+200 (/usr/bin/ctlmgr at 0002b780)
Sep 8 14:00:23 cltmgr[357]: [bt] 00409b3c+320 (/usr/bin/ctlmgr at 00009b3c)
Sep 8 14:00:23 cltmgr[357]: [bt] 00408248+3848 (/usr/bin/ctlmgr at 00008248)
WSTART (May 24 2006 18:07:23)Wstart - no WEP/WPA key set - no WLAN encryption
wstart: config ok(1)
*** sending hello msg with cipher = 1 SecurityType = 1***
*** sending hello msg with cipher = 4 SecurityType = 8***
wpa auth:waiting for driver to come up...
Wstart - made configure_wpa_authenticator
[Wstart] wlan_cal ist gesetzt: NVS DATEI WIRD MIT KALIBRIERUNGSWERTEN GEPATCHT!!
[Wstart] 9 Parameter werden gepatcht:
1) Patch: Table nr. 4 (addr:0x0114), Entry nr. 1 (addr:0x0116),Offset 2
0x0118 --> 0x09
0x0119 --> 0x00
2) Patch: Table nr. 4 (addr:0x0114), Entry nr. 2 (addr:0x011A),Offset 2
0x011c --> 0x17
0x011d --> 0x00
3) Patch: Table nr. 4 (addr:0x0114), Entry nr. 4 (addr:0x0122),Offset 2
0x0124 --> 0x18
0x0125 --> 0x00
4) Patch: Table nr. 5 (addr:0x0126), Entry nr. 1 (addr:0x0128),Offset 2
0x012a --> 0xF3
0x012b --> 0x00
5) Patch: Table nr. 5 (addr:0x0126), Entry nr. 1 (addr:0x0128),Offset 4
0x012c --> 0x0A
0x012d --> 0x01
6) Patch: Table nr. 5 (addr:0x0126), Entry nr. 2 (addr:0x0136),Offset 2
0x0138 --> 0x00
0x0139 --> 0x01
7) Patch: Table nr. 5 (addr:0x0126), Entry nr. 2 (addr:0x0136),Offset 4
0x013a --> 0x0A
0x013b --> 0x01
8) Patch: Table nr. 5 (addr:0x0126), Entry nr. 1 (addr:0x0128),Offset 6
0x012e --> 0x19
0x012f --> 0x03
9) Patch: Table nr. 5 (addr:0x0126), Entry nr. 2 (addr:0x0136),Offset 6
0x013c --> 0x3F
0x013d --> 0x03
[Wstart] NVS DATEI WURDE GEPATCHT.
NVS File loaded.
262: 802.11d is disabled
262: For SSID 0 vlan tag received is 0
262: wdrv_mgmt_ssidInit: BSSID 0 : 0::ffffffcf
262: wdrv_mgmt_ssidInit: BSSID 1 : 0:0:0:0:0:0
263: wdrv_mgmt_ssidInit: BSSID 2 : 0:0:0:0:0:0
263: wdrv_mgmt_ssidInit: BSSID 3 : 0:0:0:0:0:0
263: wdrv_mgmt_ssidInit: BSSID 4 : 0::ffffffcf
263: wdrv_dbMainInit : WME disabled
263: wdrv_dbMainInit: wdsEnabled=0
263: Configuration succeeded !!!
remote_vlynq_dev_reset_ctrl(0(VLYNQ0), IN_RESET)
gpio[a8610904] &= ~(1 << 17);
Resetting the remote device.
remote_vlynq_dev_reset_ctrl: done
remote_vlynq_dev_reset_ctrl(0(VLYNQ0), OUT_OF_RESET)
Un-resetting the remote device...
GPIO pin reset, bit 17
Setup registers for VLYNQ0
Set local_mem.RxSize to 0x1000000
VLYNQ_TXMAP_REG = 4000000
VLYNQ_R_RXMAP_OFFSET_REG(map=1) = 0
VLYNQ_R_RXMAP_SIZE_REG(map=1) = 80000
VLYNQ_R_RXMAP_OFFSET_REG(map=2) = 300000
VLYNQ_R_RXMAP_SIZE_REG(map=2) = 100000
VLYNQ_R_TXMAP_REG = 60000000
VLYNQ_RXMAP_OFFSET_REG(map=1) = 14000000
VLYNQ_RXMAP_SIZE_REG(map=1) = 1000000
VLYNQ_REV_REG = 10205
VLYNQ0: init succeeded!
vlynq init done
VLYNQ re-initialized.
Test, reading from a4000004... result = 0xeafffffe
remote_vlynq_dev_reset_ctrl: done
initTnetwAddr: MemAddr=0xa4000000, RegAddr=0xa4080000
266: AcxRegAddr = 0xA4080000, AcxMemAddr = 0xA4000000
266: whal_acxProcInitiate: Got CHIP_ID = 0x6010101
266: ***** EepromlessSupport !!!!!!!!!
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x5610 Data 0x61b04
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x5614 Data 0x6000012
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x5608 Data 0x12
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x560c Data 0xa9
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x546c Data 0x28320000
267: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x5470 Data 0x800
268: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8438 Data 0x100
268: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8500 Data 0x9068104c
268: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8504 Data 0x100006
268: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8528 Data 0x7
268: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x85c0 Data 0x300000
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x85c4 Data 0x0
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8510 Data 0xffff0000
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8514 Data 0xfff00000
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x85a4 Data 0x8000
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8508 Data 0x2800000
269: whal_hwCtrl_ProcessEepromBREntry: Reg = 0xc00 Data 0x3
270: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8420 Data 0x80000000
270: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x8580 Data 0x3001d
270: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x954 Data 0x1
270: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58e4 Data 0x2
270: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58f0 Data 0x8
271: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58d4 Data 0x10
271: whal_hwCtrl_ProcessEepromBREntry: Reg = 0x58b0 Data 0x4
271: whal_hwCtrl_ProcessEepromBR : CurrEepromBufPtr = 0xc
271: whal_hwCtrl_GetNvsDataSize: eepromImage.len = 0x1d9 271: Get NVS file info9
271: whal_acxProcInitiate: Cpu halt -> download code
271: whal_acxProcLoadFwImage() -- Loading FW image
ACX111 VL Remote Base 0x60000000
275: whal_acxProcInitiate: Run
275: whal_hwCtrl_WaitFwWhenEepromless: WaitRegVal = 0x134
275: GOT HANDSHAKE FROM FIRMWARE !!!! WaitRegVal = 0x22c84
275: whal_hwCtrl_CopyNvsData: 1
276: whal_acxProcWaitInitComplete:
276: whal_acxProcInitiate: Firmware is running...
277: ----------------------------------------------------------------
277: ACX Firmaware Version = Rev 3.4.0.41
277: EEPROM Version = 6.0.6
277: ----------------------------------------------------------------
278: whal_acxProcConfigure: Host Queue is in 0x945F8020
278:
279: whal_acxProcConfigure: read queue heads
301: WDRV_MAINSM: WLAN Driver initialized successfully
301: WDRV_4X: 4x Enabled301: WDRV_4X: Concatenation Enabled
302: WDRV_4X: Ack Emulation Disabled
304: whal_apiStartBss: Enable Tx, Rx and Start the Bss
304: ----------------------------------------------------------------
304: ----------------------------------------------------------------
304: START BSS:
304: SSID=, BSSID=
304: ----------------------------------------------------------------
304: ----------------------------------------------------------------
305: AP Power Level = 1
305: Regulatory Domain = ETSI
305: Channel=6
305: ----------------------------------------------------------------
305: Start function
305: FW Watchdog is Enabled
dda: tiwlan0 in initializing Succeeded wireless extensions: ret = 0
wlan started (OK)
Wstart - made configure_and_start_ap_driver
WSTART: done(0)
WLAN is enabled
tiwlan0 device is activated
wdsup0 device is activated
wdsdw0 device is activated
wdsdw1 device is activated
wdsdw2 device is activated
wdsdw3 device is activated
Sep 8 14:00:31 websrv[392]: csock: using poll
Sep 8 14:00:31 websrv[392]: Couldn't load shared library libavmssl.so - File )
Sep 8 14:00:32 igdd[398]: csock: using poll
Sep 8 14:00:32 igdd[398]: Couldn't load shared library libavmssl.so - File no)
2002-09-08 14:00:33 multid: startup (Jul 4 2006 12:26:30)
Sep 8 14:00:33 multid[401]: startup (Jul 4 2006 12:26:30)
2002-09-08 14:00:33 multid: csock: using poll
Sep 8 14:00:33 multid[401]: csock: using poll
2002-09-08 14:00:33 multid: Couldn't load shared library libavmssl.so - File n)
Sep 8 14:00:33 multid[401]: Couldn't load shared library libavmssl.so - File )
request_module(lan)
Sep 8 14:00:33 multid[405]: if_setup: lan:0: SIOCSIFADDR failedrequest_module()
- No such device (19)
request_module(usbrndis)
request_module(wlan)
device eth0 entered promiscuous mode
lan: port 1(eth0) entering learning state
request_module(usbrndis)
2002-09-08 14:00:34 dsld: csock: using poll
Sep 8 14:00:34 dsld[408]: csock: using poll
2002-09-08 14:00:34 dsld: Couldn't load shared library libavmssl.so - File not)
Sep 8 14:00:34 dsld[408]: Couldn't load shared lirequest_module(usbrndis)
brary libavmssl.so - File not found - Bad file descriptor (9)
Sep 8 14:00:34 multid[405]: if_setup: usbrndis: SIOCSIFADDR farequest_module(u)
iled - No such device (19)
Sep 8 14:00:34 multid[405]: br_add_if: get index for usbrndis failed - No such)
Sep 8 14:00:34 request_module(eth1)
multid[405]: if_allmulti: usbrndis: SIOCGIFFLAGS failed - No such device (19)
Sep 8 14:00:34 request_module(eth1)
multid[405]: if_setup: eth1: SIOCSIFADDR failed - No such device (19)
Sep 8 14:00:34 request_module(eth1)
multid[405]: br_add_if: get index for eth1 failed - No such device (19)
Sep 8 14:00:34 device tiwlan0 entered promiscuous mode
multid[405]: if_lan: port 2(tiwlan0) entering learning state
allmulti: eth1: device wdsup0 entered promiscuous mode
SIOCGIFFLAGS failan: port 3(wdsup0) entering learning state
led - No such dedevice wdsdw0 entered promiscuous mode
vice (19)
lan: port 4(wdsdw0) entering learning state
device wdsdw1 entered promiscuous mode
lan: port 5(wdsdw1) entering learning state
device wdsdw2 entered promiscuous mode
lan: port 6(wdsdw2) entering learning state
device wdsdw3 entered promiscuous mode
lan: port 7(wdsdw3) entering learning state
Sep 8 14:00:34 multid[405]: static routes: 0 deleted (0 failed), 0 added (0 fa)
Sep 8 14:00:34 multid[405]: static routes: 0 deleted (0 failed), 0 added (0 fa)
2002-09-08 14:00:34 dsld: startup (May 24 2006 18:06:25)
Sep 8 14:00:34 dsld[408]: startup (May 24 2006 18:06:25)
Sep 8 14:00:34 multid[405]: mrouter: using IGMPv3 for upstream interface
Sep 8 14:00:34 multid[405]: mrouter: using IGMPv3 for other interfaces
Sep 8 14:00:34 multid[405]: DHCPD on lan
Sep 8 14:00:34 multid[405]: DHCPD on lan:0 skipped, is virtual interface
Sep 8 14:00:34 multid[405]: DDNS: no valid accounts
Sep 8 14:00:34 multid[405]: ONLINE: script /bin/onlinechanged not found.
Sep 8 14:00:34 multid[405]: mrouter: lo: no multicast interface, ignored.
Sep 8 14:00:34 multid[405]: eth0: SIOCGIFADDR - Cannot assign requested addres)
Sep 8 14:00:34 multid[405]: tiwlan0: SIOCGIFADDR - Cannot assign requested add)
Sep 8 14:00:34 multid[405]: wdsup0: SIOCGIFADDR - Cannot assign requested addr)
Sep 8 14:00:34 multid[405]: wdsdw0: SIOCGIFADDR - Cannot assign requested addr)
Sep 8 14:00:34 multid[405]: wdsdw1: SIOCGIFADDR - Cannot assign requested addr)
Sep 8 14:00:34 multid[405]: wdsdw2: SIOCGIFADDR - Cannot assign requested addr)
Sep 8 14:00:34 multid[405]: wdsdw3: SIOCGIFADDR - Cannot assign requested addr)
Sep 8 14:00:34 dsld[423]: DSL Mac
Sep 8 14:00:34 dsld[423]: VOIP Mac 00:15:
/etc/init.d/rc.net: 1: avmike: not found
Sep 8 14:00:35 dsld[423]: tiatm version: 4.06.04.29
Sep 8 14:00:35 dsld[423]: using avm_event for dslstatus and speed
Sep 8 14:00:35 kdsld: sync lost
dsld[423]: avmevent: using short status (id=17)
Sep 8 14:00:35 dsld[423]: no sync
telefon: use clock_gettime(CLOCK_MONOTONIC)!
telefon: SIGCHLD received!
telefon: WARNING No config file '/var/flash/fx_def' !
kcapi: capi_get_profile(0) ncards(5)
kcapi: appl 1 up
kcapi: appl 2 up
kcapi: appl 3 up
voipd: csock: using poll
voipd: Couldn't load shared library libavmssl.so - File not found - Success (0)
Sep 8 14:00:37 voipd[450]: startup (AVM Speedport W 501V 28.04.07 AVM SIP v5.0)
kcapi: capi_get_profile(0) ncards(5)
Sep 8 14:00:37 kcapi: capi_get_profile(5) ncards(5)
voipd[450]: usinkcapi: appl 4 up
g capi controller 5
Sep 8 14:00:37 voipd[450]: using b1 protocol 10
Sep 8 14:00:37 voipd[450]: tel: supported
Sep 8 14:00:37 voipd[450]: ENUM NOT enabled
Sep 8 14:00:37 voipd[450]: enumdomain: e164.arpa
Sep 8 14:00:37 voipd[450]: enumdomain: e164.org
Sep 8 14:00:37 voipd[450]: Couldn't load shared library libspeex.so - File not)
Sep 8 14:00:37 voipd[450]: VoIP led value = 0
Sep 8 14:00:37 voipd[450]: no useragent configured
Sep 8 14:00:37 voipd[450]: INFO led: off (value=0)
Sep 8 14:00:37 voipd[450]: priority is -20
Sep 8 14:00:37 voipd[450]: encaplen 32
Sep 8 14:0lan: port 1(eth0) entering forwarding state
0:37 voipd[450]:lan: topology change detected brutto speed un, propagatingknown
Sep 8 14:00:38 websrv[392]: startup (May 24 2006 18:05:20)
Sep 8 14:00:38 voipd[450]: connstatus 0 -> 1
Sep 8 14:00:38 voipd[450]: PCMA: 98933 bits/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: PCMU: 98933 bAR7WDT: System Init UEberwachung abges)
its/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: G726-32: 70666 bits/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: G726-40: 70666 bits/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: G726-24: 56533 bits/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: iLBC: 42400 bits/second (encaplen=32,30ms)
Sep 8 14:00:38 voipd[450]: PCMA: 106000 bits/second (encaplen=32,20ms)
Sep 8 14:00:38 voipd[450]: PCMU: 106000 bits/second (encaplen=32,20ms)
Sep 8 14:00:38 voipd[450]: G726-32: 84800 bits/second (encaplen=32,20ms)
Sep 8 14:00:38 voipd[450]: G726-40: 84800 bits/second (encaplen=32,20ms)
Sep 8 14:00:38 voipd[450]: G726-24: 63600 bits/second (encaplen=32,20ms)
Sep 8 14:00:38 voipd[450]: iLBC: 63600 bits/second (encaplen=32,20ms)
run_clock demon started
lan: port 2(tiwlan0) entering forwarding state
lan: topology change detected, propagating
lan: port 3(wdsup0) entering forwarding state
lan: topology change detected, propagating
lan: port 4(wdsdw0) entering forwarding state
lan: topology change detected, propagating
lan: port 5(wdsdw1) entering forwarding state
lan: topology change detected, propagating
lan: port 6(wdsdw2) entering forwarding state
lan: topology change detected, propagating
lan: port 7(wdsdw3) entering forwarding state
lan: topology change detected, propagating
Please press Enter to activate this console.
BusyBox v1.00-pre3 (2006.03.24-08:21+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
Sep 8 14:00:42 igdd[398]: OemStringData.MAC:
Sep 8 14:00:42 igdd[398]: OemStringData.BOXID=
Sep 8 14:00:42 igdd[398]: UserStringData...
Sep 8 14:00:42 igdd[398]: UPNP-Description:uwe UPnP/1.0 AVM Speedport W 501V 27
Sep 8 14:00:42 igdd[398]: start igdserver
Sep 8 14:00:42 igdd[398]: startup (May 24 2006 18:05:29)
HWRevision='93'
HWRevision_ATA='1'
HWRevision_BitFileCount=''
HWRevision_Reserved1='0'
ANNEX='B'
OEM='tcom'
Language='de'
Country='049'
TZ='CET-1CEST,M3.5.0,M10.5.0'
CONFIG_AB_COUNT='2'
CONFIG_ANNEX='B'
CONFIG_ASSIST='y'
CONFIG_ATA='n'
CONFIG_ATA_FULL='n'
CONFIG_AUDIO='n'
CONFIG_AURA='n'
CONFIG_BLUETOOTH='n'
CONFIG_BLUETOOTH_CTP='n'
CONFIG_BUTTON='n'
CONFIG_CAPI='y'
CONFIG_CAPI_MIPS='n'
CONFIG_CAPI_NT='n'
CONFIG_CAPI_POTS='y'
CONFIG_CAPI_TE='n'
CONFIG_CAPI_UBIK='n'
CONFIG_CAPI_XILINX='y'
CONFIG_CDROM='n'
CONFIG_CDROM_FALLBACK='n'
CONFIG_DECT='n'
CONFIG_DSL='y'
CONFIG_ENVIRONMENT_PATH='/proc/sys/dev/adam2'
CONFIG_ETH_COUNT='1'
CONFIG_FIRMWARE_URL='http://www.telekom.de/faq'
CONFIG_FON='y'
CONFIG_HOMEI2C='n'
CONFIG_HOSTNAME='speedport.ip'
CONFIG_I2C='n'
CONFIG_INSTALL_TYPE='ar7_4MB_1eth_2ab_pots_wlan_28776'
CONFIG_JFFS2='n'
CONFIG_LED_NO_DSL_LED='n'
CONFIG_MAILER='n'
CONFIG_MEDIACLI='n'
CONFIG_MEDIASRV='n'
CONFIG_NAND='n'
CONFIG_NFS='n'
CONFIG_OEM_DEFAULT='tcom'
CONFIG_PRODUKT='Fritz_Box_SpeedportW501V'
CONFIG_PRODUKT_NAME='Speedport W 501V'
CONFIG_RAMSIZE='16'
CONFIG_ROMSIZE='4'
CONFIG_SERVICEPORTAL_URL='none'
CONFIG_STOREUSRCFG='y'
CONFIG_SUBVERSION=''
CONFIG_TAM='n'
CONFIG_TAM_MODE='0'
CONFIG_TR069='n'
CONFIG_UBIK2='n'
CONFIG_UPNP='y'
CONFIG_USB='n'
CONFIG_USB_HOST_AVM='n'
CONFIG_USB_HOST_TI='n'
CONFIG_USB_PRINT_SERV='n'
CONFIG_USB_STORAGE='n'
CONFIG_USB_WLAN_AUTH='n'
CONFIG_VDSL='n'
CONFIG_VERSION='04.07'
CONFIG_VERSION_MAJOR='28'
CONFIG_VLYNQ='y'
CONFIG_VLYNQ0='3'
CONFIG_VLYNQ1='0'
CONFIG_VLYNQ_PARAMS='vlynq_reset_bit_0=17'
CONFIG_VPN='n'
CONFIG_WLAN='y'
CONFIG_WLAN_1130TNET='n'
CONFIG_WLAN_1350TNET='y'
CONFIG_WLAN_GREEN='n'
CONFIG_WLAN_WDS='y'
CONFIG_XILINX='y'
ermittle die aktuelle TTY
tty is "/dev/tts/0"
Serielles Terminal