Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.5-RELEASE #0: Tue May 23 14:58:27 UTC 2006
root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 3400+ (1795.52-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe8500000<NX,AMIE,<b27>,LM,DSP,3DNow!>
real memory = 234684416 (223 MB)
avail memory = 219983872 (209 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 4.0 on pci0
pci16: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 5.0 on pci0
pci32: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 6.0 on pci0
pci48: <PCI bus> on pcib4
pci48: <network> at device 0.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0x7020-0x702f,0x7018-0x701b,0x9010-0x9017,0x9008-0x900b,0x9000-0x9007 irq 10 at device 18.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 11 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 11 at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <GENERIC ATA controller> port 0x7040-0x704f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 10 at device 20.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pcm0: <ATI SB450 High Definition Audio Controller> mem 0xd0408000-0xd040bfff irq 10 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib5
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xd0000000-0xd000ffff irq 10 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:17:08:3d:08:4c
cbb0: <PCI-CardBus Bridge> mem 0xd0010000-0xd0010fff irq 10 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xd0014000-0xd0017fff,0xd0011000-0xd00117ff irq 10 at device 4.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:99:29:91:40:0c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:91:40:0c
fwe0: Ethernet address: 02:02:3f:91:40:0c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci2: <mass storage> at device 4.2 (no driver attached)
pci2: <base peripheral> at device 4.3 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
ppc1: parallel port not found.
unknown: <PNP0c02> can't assign resources (memory)
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.23, addr 2
Timecounter "TSC" frequency 1795515306 Hz quality 800
Timecounters tick every 10.000 msec
cardbus0: <network, ethernet> at device 0.0 (no driver attached)
acd0: DVDR <HL-DT-ST DVDRAM GMA-4082N/HQ04> at ata0-master PIO4
ad4: 38166MB <FUJITSU MHV2040BH/892C> [77545/16/63] at ata2-master UDMA33
pcm0: <HDA Codec: Analog Device AD1981HD>
pcm0: <HDA Driver Revision: 20061210_0037>
Mounting root from ufs:/dev/ad4s1a