gandalf

uname:Linux hellscream 2.6.18-3-amd64 #1 SMP Mon Dec 4 17:04:37 CET 2006 x86_64 GNU/Linuxlsmod:Module                  Size  Used byisofs                  40036  0 udf                    81416  0 perle_serial           61672  0 tun                    16256  0 kqemu                 170120  0 appletalk              46832  0 ax25                   65148  0 ipx                    37960  0 p8023                   6784  1 ipxrfcomm                 47912  0 l2cap                  32512  5 rfcommbluetooth              61316  4 rfcomm,l2capnfs                   236216  0 ipv6                  285664  23 nfsd                  256200  17 exportfs               10368  1 nfsdlockd                  67600  3 nfs,nfsdnfs_acl                 8320  2 nfs,nfsdsunrpc                166984  13 nfs,nfsd,lockd,nfs_aclppdev                  14088  0 lp                     17736  0 button                 12192  0 ac                     10376  0 battery                15496  0 bridge                 63280  0 binfmt_misc            17292  1 fuse                   48816  2 dm_snapshot            20536  0 dm_mirror              25216  0 dm_mod                 62800  2 dm_snapshot,dm_mirrorw83627ehf              20108  0 eeprom                 12560  0 i2c_isa                10752  1 w83627ehfnvidia               5435348  12 snd_bt87x              20740  0 bt878                  16488  0 tuner                  65704  0 snd_hda_intel          23708  0 bttv                  203892  1 bt878snd_hda_codec         184192  1 snd_hda_intelvideo_buf              30852  1 bttvfirmware_class         15616  1 bttvsnd_pcm_oss            48672  0 ir_common              34692  1 bttvsnd_mixer_oss          21888  1 snd_pcm_osscompat_ioctl32         13184  1 bttvsnd_pcm                88968  4 snd_bt87x,snd_hda_intel,snd_hda_codec,snd_pcm_ossi2c_algo_bit           13832  1 bttvbtcx_risc               9608  1 bttvtveeprom               21264  1 bttvsnd_timer              29192  1 snd_pcmvideodev               29696  1 bttvsnd                    65256  7 snd_bt87x,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timertsdev                  13056  0 v4l1_compat            16260  1 videodevi2c_i801               13076  0 v4l2_common            28672  4 tuner,bttv,compat_ioctl32,videodevsoundcore              15392  1 sndsnd_page_alloc         14864  3 snd_bt87x,snd_hda_intel,snd_pcmpcspkr                  7808  0 psmouse                44432  0 serio_raw              12036  0 eth1394                24840  0 evdev                  15360  2 i2c_core               27776  9 w83627ehf,eeprom,i2c_isa,nvidia,tuner,bttv,i2c_algo_bit,tveeprom,i2c_i801parport_pc             41640  1 parport                44684  3 ppdev,lp,parport_pcfloppy                 67112  0 reiserfs              231168  6 ide_cd                 45088  0 cdrom                  40488  1 ide_cdusb_storage            87616  0 usbhid                 45088  0 piix                   15492  0 [permanent]sd_mod                 25856  9 uhci_hcd               28432  0 generic                10756  0 [permanent]sata_sil24             20740  0 ahci                   24708  9 libata                106784  2 sata_sil24,ahciskge                   43536  0 e1000                 123968  0 scsi_mod              152880  4 usb_storage,sd_mod,ahci,libatait821x                 13316  0 [permanent]ide_core              147584  5 ide_cd,usb_storage,piix,generic,it821xohci1394               38216  0 ieee1394              361976  2 eth1394,ohci1394thermal                20240  0 processor              38248  1 thermalfan                     9864  0 dmesg:Bootdata ok (command line is root=/dev/sda2 ro )Linux version 2.6.18-3-amd64 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 17:04:37 CET 2006BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099000 (usable) BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data) BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)DMI 2.3 present.ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa940ACPI: RSDT (v001 A M I  OEMRSDT  0x03000631 MSFT 0x00000097) @ 0x000000003ff80000ACPI: FADT (v001 A M I  OEMFACP  0x03000631 MSFT 0x00000097) @ 0x000000003ff80200ACPI: MADT (v001 A M I  OEMAPIC  0x03000631 MSFT 0x00000097) @ 0x000000003ff80390ACPI: OEMB (v001 A M I  AMI_OEM  0x03000631 MSFT 0x00000097) @ 0x000000003ff8e040ACPI: MCFG (v001 A M I  OEMMCFG  0x03000631 MSFT 0x00000097) @ 0x000000003ff88800ACPI: DSDT (v001  A0229 A0229000 0x00000000 INTL 0x02002026) @ 0x0000000000000000No NUMA configuration foundFaking a node at 0000000000000000-000000003ff80000Bootmem setup node 0 0000000000000000-000000003ff80000On node 0 totalpages: 257441  DMA zone: 3047 pages, LIFO batch:0  DMA32 zone: 254394 pages, LIFO batch:31ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Processor #0 15:4 APIC version 20ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Processor #1 15:4 APIC version 20ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Setting APIC routing to physical flatUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)SMP: Allowing 4 CPUs, 2 hotplug CPUsBuilt 1 zonelists.  Total pages: 257441Kernel command line: root=/dev/sda2 ro Initializing CPU#0PID hash table entries: 4096 (order: 12, 32768 bytes)time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.time.c: Detected 3606.186 MHz processor.Console: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)Checking aperture...Memory: 1023112k/1048064k available (1929k kernel code, 24540k reserved, 864k data, 176k init)Calibrating delay using timer specific routine.. 7218.41 BogoMIPS (lpj=14436823)Security Framework v1.0.0 initializedSELinux:  Disabled at boot.Capability LSM initializedMount-cache hash table entries: 256CPU: Trace cache: 12K uops, L1 D cache: 16KCPU: L2 cache: 1024Kusing mwait in idle threads.CPU: Physical Processor ID: 0CPU: Processor Core ID: 0CPU0: Thermal monitoring enabled (TM1)SMP alternatives: switching to UP codeACPI: Core revision 20060707Using local APIC timer interrupts.result 11269285Detected 11.269 MHz APIC timer.SMP alternatives: switching to SMP codeBooting processor 1/2 APIC 0x1Initializing CPU#1Calibrating delay using timer specific routine.. 7212.64 BogoMIPS (lpj=14425295)CPU: Trace cache: 12K uops, L1 D cache: 16KCPU: L2 cache: 1024KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1CPU1: Thermal monitoring enabled (TM1)             Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07Brought up 2 CPUstesting NMI watchdog ... OK.migration_cost=1073checking if image is initramfs... it isFreeing initrd memory: 4915k freedNET: Registered protocol family 16ACPI: bus type pci registeredPCI: BIOS Bug: MCFG area at f0000000 is not E820-reservedPCI: Not using MMCONFIG.PCI: Using configuration type 1ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1Boot video device is 0000:05:00.0PCI: Transparent bridge - 0000:00:1e.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: ACPI device : hid PNP0A08pnp: ACPI device : hid PNP0C01pnp: ACPI device : hid PNP0200pnp: ACPI device : hid PNP0B00pnp: ACPI device : hid PNP0800pnp: ACPI device : hid PNP0C04pnp: ACPI device : hid PNP0700pnp: ACPI device : hid PNP0401pnp: ACPI device : hid PNP0C02pnp: ACPI device : hid PNP0C02pnp: ACPI device : hid PNP0303pnp: ACPI device : hid PNP0C02pnp: ACPI device : hid PNP0501pnp: ACPI device : hid PNP0C02pnp: ACPI device : hid PNP0C01pnp: PnP ACPI: found 15 devicesusbcore: registered new driver usbfsusbcore: registered new driver hubPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a reportPCI-GART: No AMD northbridge found.pnp: the driver 'system' has been registeredpnp: match found with the PnP device '00:01' and the driver 'system'pnp: match found with the PnP device '00:08' and the driver 'system'pnp: 00:08: ioport range 0x290-0x297 has been reservedpnp: match found with the PnP device '00:09' and the driver 'system'pnp: match found with the PnP device '00:0b' and the driver 'system'pnp: match found with the PnP device '00:0d' and the driver 'system'pnp: match found with the PnP device '00:0e' and the driver 'system'PCI: Bridge: 0000:00:01.0  IO window: e000-efff  MEM window: dcf00000-deffffff  PREFETCH window: e0000000-efffffffPCI: Bridge: 0000:00:1c.0  IO window: d000-dfff  MEM window: disabled.  PREFETCH window: disabled.PCI: Bridge: 0000:00:1c.4  IO window: c000-cfff  MEM window: dce00000-dcefffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1c.5  IO window: b000-bfff  MEM window: dcd00000-dcdfffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1e.0  IO window: 9000-afff  MEM window: dcc00000-dccfffff  PREFETCH window: dff00000-dfffffffGSI 16 sharing vector 0xA9 and IRQ 16ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:00:01.0 to 64ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:00:1c.0 to 64ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:00:1c.4 to 64GSI 17 sharing vector 0xB1 and IRQ 17ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177PCI: Setting latency timer of device 0000:00:1c.5 to 64PCI: Setting latency timer of device 0000:00:1e.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 6, 262144 bytes)TCP established hash table entries: 131072 (order: 9, 2097152 bytes)TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredaudit: initializing netlink socket (disabled)audit(1165351884.908:1): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 512 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)PCI: Setting latency timer of device 0000:00:01.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:01.0:pcie00]PCI: Setting latency timer of device 0000:00:1c.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.0:pcie00]Allocate Port Service[0000:00:1c.0:pcie02]PCI: Setting latency timer of device 0000:00:1c.4 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.4:pcie00]PCI: Setting latency timer of device 0000:00:1c.5 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.5:pcie00]Real Time Clock Driver v1.12acLinux agpgart interface v0.101 (c) Dave JonesSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Apnp: the driver 'serial' has been registeredpnp: match found with the PnP device '00:0c' and the driver 'serial'00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550ARAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeusbmon: debugfs is not availablepnp: the driver 'i8042 kbd' has been registeredpnp: match found with the PnP device '00:0a' and the driver 'i8042 kbd'pnp: the driver 'i8042 aux' has been registeredPNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1PNP: PS/2 controller doesn't have AUX irq; using default 12serio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1mice: PS/2 mouse device common for all miceTCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8NET: Registered protocol family 20ACPI: (supports S0 S1 S3 S4 S5)Freeing unused kernel memory: 176k freedinput: AT Translated Set 2 keyboard as /class/input/input0ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff8100011d8210), AE_BAD_HEADERACPI: Processor [CPU1] (supports 8 throttling states)ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff8100011d8ad0), AE_BAD_HEADERACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]ACPI: Getting cpuindex for acpiid 0x3ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]ACPI: Getting cpuindex for acpiid 0x4ieee1394: Initialized config rom entry `ip1394'GSI 18 sharing vector 0xE1 and IRQ 18ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 225ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225]  MMIO=[dccfb800-dccfbfff]  Max Packet=[2048]  IR/IT contexts=[4/8]Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxIT8212: IDE controller at PCI slot 0000:01:04.0GSI 19 sharing vector 0xE9 and IRQ 19ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 19 (level, low) -> IRQ 233IT8212: chipset revision 17it821x: controller in pass through mode.IT8212: 100% native mode on irq 233    ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:pio    ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pioProbing IDE interface ide0...SCSI subsystem initializedIntel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPICopyright (c) 1999-2006 Intel Corporation.libata version 2.00 loaded.USB Universal Host Controller Interface driver v3.0Probing IDE interface ide1...ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:03:00.0 to 64e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:17:31:3f:72:cdieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000a8277f]e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connectionahci 0000:00:1f.2: version 2.0GSI 20 sharing vector 0x32 and IRQ 20ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 50PCI: Setting latency timer of device 0000:00:1f.2 to 64ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID modeahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000078D00 ctl 0x0 bmdma 0x0 irq 58ata2: SATA max UDMA/133 cmd 0xFFFFC20000078D80 ctl 0x0 bmdma 0x0 irq 58ata3: SATA max UDMA/133 cmd 0xFFFFC20000078E00 ctl 0x0 bmdma 0x0 irq 58ata4: SATA max UDMA/133 cmd 0xFFFFC20000078E80 ctl 0x0 bmdma 0x0 irq 58scsi0 : ahciata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32)ata1.00: ata1: dev 0 multi count 16ata1.00: configured for UDMA/133scsi1 : ahciata2: SATA link down (SStatus 0 SControl 300)scsi2 : ahciata3: SATA link down (SStatus 0 SControl 300)scsi3 : ahciata4: SATA link down (SStatus 0 SControl 300)  Vendor: ATA       Model: ST3250823AS       Rev: 3.01  Type:   Direct-Access                      ANSI SCSI revision: 05ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 225skge 1.6 addr 0xdccfc000 irq 225 chip Yukon-Lite rev 9skge eth0: addr 00:17:31:3f:67:81sata_sil24 0000:02:00.0: version 0.3ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177PCI: Setting latency timer of device 0000:02:00.0 to 64ata5: SATA max UDMA/100 cmd 0xFFFFC200000B0000 ctl 0x0 bmdma 0x0 irq 177ata6: SATA max UDMA/100 cmd 0xFFFFC200000B2000 ctl 0x0 bmdma 0x0 irq 177scsi4 : sata_sil24SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)sda: Write Protect is offsda: Mode Sense: 00 3a 00 00SCSI device sda: drive cache: write backSCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)sda: Write Protect is offsda: Mode Sense: 00 3a 00 00SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4sd 0:0:0:0: Attached scsi disk sdaata5: SATA link down (SStatus 0 SControl 300)scsi5 : sata_sil24ata6: SATA link down (SStatus 0 SControl 300)GSI 21 sharing vector 0x42 and IRQ 21ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 66PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:1d.0: irq 66, io base 0x00006000usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.1: irq 177, io base 0x00006400usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedGSI 22 sharing vector 0x4A and IRQ 22ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.2: irq 74, io base 0x00006800usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 233PCI: Setting latency timer of device 0000:00:1d.3 to 64uhci_hcd 0000:00:1d.3: UHCI Host Controlleruhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.3: irq 233, io base 0x00007000usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedusb 1-2: new low speed USB device using uhci_hcd and address 2ICH7: IDE controller at PCI slot 0000:00:1f.1GSI 23 sharing vector 0x52 and IRQ 23ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 82ICH7: chipset revision 1ICH7: not 100% native mode: will probe irqs later    ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:pio, hdf:DMA    ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:pio, hdh:pioProbing IDE interface ide2...usb 1-2: configuration #1 chosen from 1 choiceusb 4-1: new full speed USB device using uhci_hcd and address 2usb 4-1: configuration #1 chosen from 1 choiceInitializing USB Mass Storage driver...usb 4-2: new full speed USB device using uhci_hcd and address 3hdf: _NEC DVD_RW ND-4570A, ATAPI CD/DVD-ROM driveide2 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide3...usb 4-2: configuration #1 chosen from 1 choiceusbcore: registered new driver hiddevinput: Logitech USB-PS/2 Optical Mouse as /class/input/input1input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driverscsi6 : SCSI emulation for USB Mass Storage devicesusb-storage: device found at 2usb-storage: waiting for device to settle before scanningusbcore: registered new driver usb-storageUSB Mass Storage support registered.hdf: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)Uniform CD-ROM driver Revision: 3.20  Vendor: TEAC      Model: FD-05PUB          Rev: 2000  Type:   Direct-Access                      ANSI SCSI revision: 00sd 6:0:0:0: Attached scsi removable disk sdbusb-storage: device scan completeReiserFS: sda2: found reiserfs format "3.6" with standard journalReiserFS: sda2: using ordered data modeReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda2: checking transaction log (sda2)ReiserFS: sda2: Using r5 hash to sort namesFloppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077pnp: the driver 'parport_pc' has been registeredpnp: match found with the PnP device '00:07' and the driver 'parport_pc'parport: PnPBIOS parport detected.parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)intel_rng: FWH not detectedinput: PC Speaker as /class/input/input2ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 50ts: Compaq touchscreen protocol outputLinux video capture interface: v2.00bttv: driver version 0.9.16 loadedbttv: using 8 buffers with 2080k (520 pages) each for capturebttv: Bt8xx card found (0).ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 50bttv0: Bt878 (rev 17) at 0000:01:02.0, irq: 50, latency: 64, mmio: 0xdfffe000bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]bttv0: gpio: en=00000000, out=00000000 in=00bff501 [init]bttv0: using tuner=3bttv0: i2c: checking for MSP34xx @ 0x80... not foundbttv0: i2c: checking for TDA9875 @ 0xb0... not foundbttv0: i2c: checking for TDA7432 @ 0x8a... not foundbttv0: i2c: checking for TDA9887 @ 0x86... not foundACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 233PCI: Setting latency timer of device 0000:00:1b.0 to 64tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])tuner 1-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))bttv0: registered device video0bttv0: registered device vbi0bttv0: registered device radio0bttv0: PLL: 28636363 => 35468950 .. okinput: bttv IR (card=34) as /class/input/input3bttv-input: bttv IR (card=34) detected at pci-0000:01:02.0/ir0bt878: AUDIO driver version 0.0.0 loadedhda_codec: Unknown model for ALC882, trying auto-probe from BIOS...bt878: Bt878 AUDIO function found (0).ACPI: PCI Interrupt 0000:01:02.1[A] -> GSI 23 (level, low) -> IRQ 50bt878_probe: card id=[0x6606107d], Unknown card.Exiting..ACPI: PCI interrupt for device 0000:01:02.1 disabledbt878: probe of 0000:01:02.1 failed with error -22PCI: Enabling device 0000:01:02.1 (0000 -> 0002)ACPI: PCI Interrupt 0000:01:02.1[A] -> GSI 23 (level, low) -> IRQ 50Adding 425648k swap on /dev/sda5.  Priority:-1 extents:1 across:425648knvidia: module license 'NVIDIA' taints kernel.ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:05:00.0 to 64NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8776  Mon Oct 16 21:53:43 PDT 2006QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2006 Fabrice BellardThis is a proprietary product. Read the LICENSE file for more informationRedistribution of this module is prohibited without authorizationKQEMU installed, max_locked_mem=514100kB.device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.comfuse init (API version 7.7)ReiserFS: sda4: found reiserfs format "3.6" with standard journalReiserFS: sda4: using ordered data modeReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda4: checking transaction log (sda4)ReiserFS: sda4: Using r5 hash to sort namesReiserFS: sda6: found reiserfs format "3.6" with standard journalReiserFS: sda6: using ordered data modeReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda6: checking transaction log (sda6)ReiserFS: sda6: Using r5 hash to sort namesReiserFS: sda7: found reiserfs format "3.6" with standard journalReiserFS: sda7: using ordered data modeReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda7: checking transaction log (sda7)ReiserFS: sda7: Using r5 hash to sort namesReiserFS: sda8: found reiserfs format "3.6" with standard journalReiserFS: sda8: using ordered data modeReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda8: checking transaction log (sda8)ReiserFS: sda8: Using r5 hash to sort namesReiserFS: sda9: found reiserfs format "3.6" with standard journalReiserFS: sda9: using ordered data modeReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sda9: checking transaction log (sda9)ReiserFS: sda9: Using r5 hash to sort namesBridge firewalling registereddevice eth0 entered promiscuous modeaudit(1165348326.674:2): dev=eth0 prom=256 old_prom=0 auid=4294967295skge eth0: enabling interfaceskge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rxbr0: port 1(eth0) entering learning statebr0: topology change detected, propagatingbr0: port 1(eth0) entering forwarding stateACPI: Power Button (FF) [PWRF]ACPI: Power Button (CM) [PWRB]lp0: using parport0 (interrupt-driven).ppdev: user-space parallel port driverInstalling knfsd (copyright (C) 1996 okir@monad.swb.de).NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directoryNFSD: starting 90-second grace periodNET: Registered protocol family 10lo: Disabled Privacy ExtensionsADDRCONF(NETDEV_UP): eth2: link is not readyIPv6 over IPv4 tunneling driverBluetooth: Core ver 2.10NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedBluetooth: L2CAP ver 2.8Bluetooth: L2CAP socket layer initializedBluetooth: RFCOMM socket layer initializedBluetooth: RFCOMM TTY layer initializedBluetooth: RFCOMM ver 1.8i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chipsi2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chipsi2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chipsbr0: no IPv6 routers presenteth0: no IPv6 routers presentNET: Registered protocol family 4NET: Registered protocol family 3NET: Registered protocol family 5bttv0: PLL can sleep, using XTAL (28636363).bttv0: PLL: 28636363 => 35468950 .. okQEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2006 Fabrice BellardThis is a proprietary product. Read the LICENSE file for more informationRedistribution of this module is prohibited without authorizationKQEMU installed, max_locked_mem=514100kB.CPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU0: Temperature above threshold, cpu clock throttledCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU0: Temperature above threshold, cpu clock throttledCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU0: Temperature above threshold, cpu clock throttledCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedCPU0: Temperature above threshold, cpu clock throttledCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedbttv0: PLL can sleep, using XTAL (28636363).tun: Universal TUN/TAP device driver, 1.6tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>bttv0: PLL: 28636363 => 35468950 .. okdevice tap0 entered promiscuous modeaudit(1165354122.016:3): dev=tap0 prom=256 old_prom=0 auid=4294967295br0: port 2(tap0) entering learning statetap0: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 2(tap0) entering forwarding statebr0: port 2(tap0) entering disabled statebr0: port 2(tap0) entering disabled stateQEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2006 Fabrice BellardThis is a proprietary product. Read the LICENSE file for more informationRedistribution of this module is prohibited without authorizationKQEMU installed, max_locked_mem=514100kB.tun: Universal TUN/TAP device driver, 1.6tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>device tap0 entered promiscuous modeaudit(1165355941.134:4): dev=tap0 prom=256 old_prom=0 auid=4294967295br0: port 2(tap0) entering learning statetap0: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 2(tap0) entering forwarding statebr0: port 2(tap0) entering disabled statebr0: port 2(tap0) entering disabled statedevice tap0 entered promiscuous modeaudit(1165357347.658:5): dev=tap0 prom=256 old_prom=0 auid=4294967295br0: port 2(tap0) entering learning statetap0: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 2(tap0) entering forwarding statebr0: port 2(tap0) entering disabled statebr0: port 2(tap0) entering disabled statedevice tap0 entered promiscuous modeaudit(1165357477.366:6): dev=tap0 prom=256 old_prom=0 auid=4294967295br0: port 2(tap0) entering learning statebr0: port 2(tap0) entering disabled statebr0: port 2(tap0) entering disabled statedevice tap0 entered promiscuous modeaudit(1165357503.435:7): dev=tap0 prom=256 old_prom=0 auid=4294967295br0: port 2(tap0) entering learning statetap0: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 2(tap0) entering forwarding stateCPU1: Temperature above threshold, cpu clock throttleddevice tap1 entered promiscuous modeaudit(1165361226.948:8): dev=tap1 prom=256 old_prom=0 auid=4294967295br0: port 3(tap1) entering learning statetap1: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 3(tap1) entering forwarding stateMachine check events loggedCPU1: Temperature above threshold, cpu clock throttledMachine check events loggedPerle Serial driver version 3.3.0 (2006-07-28) with SHARE_IRQ SERIAL_PCI enabledbr0: port 3(tap1) entering disabled statebr0: port 2(tap0) entering disabled statebr0: port 1(eth0) entering disabled stateskge eth0: disabling interfacedevice eth0 left promiscuous modeaudit(1165714768.975:9): dev=eth0 prom=0 old_prom=256 auid=4294967295br0: port 1(eth0) entering disabled statebr0: port 3(tap1) entering disabled statebr0: port 2(tap0) entering disabled statedevice eth0 entered promiscuous modeaudit(1165714775.595:10): dev=eth0 prom=256 old_prom=0 auid=4294967295skge eth0: enabling interfacebr0: port 1(eth0) entering learning stateskge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rxbr0: no IPv6 routers presenteth0: no IPv6 routers presentbr0: topology change detected, propagatingbr0: port 1(eth0) entering forwarding stateADDRCONF(NETDEV_UP): eth2: link is not readybttv0: PLL can sleep, using XTAL (28636363).