rendered paste bodylsmod (/bin/lsmod):Module Size Used byipv6 211424 8 ppdev 8452 0 parport_pc 31524 0 lp 10692 0 parport 31944 3 ppdev,parport_pc,lpbutton 6544 0 ac 4868 0 battery 9220 0 sata_sil 9480 0 libata 60300 1 sata_silscsi_mod 120840 1 libatadm_snapshot 15772 0 dm_mirror 17616 0 dm_mod 48696 2 dm_snapshot,dm_mirrorloop 13832 0 joydev 8896 0 snd_atiixp 17292 3 snd_atiixp_modem 14088 0 snd_ac97_codec 82336 2 snd_atiixp,snd_atiixp_modemsnd_ac97_bus 2304 1 snd_ac97_codecbcm43xx 401536 0 snd_pcm_oss 35616 0 snd_mixer_oss 15616 1 snd_pcm_osstsdev 7360 0 mousedev 10400 1 pcmcia 33468 0 firmware_class 9344 2 bcm43xx,pcmciashpchp 33816 0 pci_hotplug 26420 1 shpchpsnd_pcm 71432 5 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_ossieee80211softmac 22912 1 bcm43xxati_agp 8460 0 snd_timer 19716 2 snd_pcmagpgart 29232 1 ati_agpusbhid 35040 0 yenta_socket 23948 1 ieee80211 28616 2 bcm43xx,ieee80211softmacrtc 11444 0 snd 45668 11 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer8250_pci 19840 0 evdev 8960 2 pcspkr 2816 0 rsrc_nonstatic 11904 1 yenta_socketpcmcia_core 36368 3 pcmcia,yenta_socket,rsrc_nonstaticpsmouse 34184 0 ieee80211_crypt 5376 1 ieee80211serio_raw 6276 0 soundcore 8800 1 sndsnd_page_alloc 9480 3 snd_atiixp,snd_atiixp_modem,snd_pcmext3 115336 1 jbd 45460 1 ext3ide_cd 35104 0 cdrom 32288 1 ide_cdide_disk 14976 3 ohci_hcd 17412 0 ehci_hcd 26888 0 usbcore 108544 4 usbhid,ohci_hcd,ehci_hcdatiixp 5520 0 [permanent]generic 4356 0 [permanent]ide_core 107940 4 ide_cd,ide_disk,atiixp,generic8139cp 19328 0 8139too 23680 0 mii 5248 2 8139cp,8139toothermal 12680 0 processor 21440 1 thermalfan 4484 0 uname (/bin/uname -a):Linux serenity 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 GNU/Linuxdmesg (/bin/dmesg):Linux version 2.6.17-2-486 (Debian 2.6.17-9) (waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable) BIOS-e820: 0000000037ef0000 - 0000000037eff000 (ACPI data) BIOS-e820: 0000000037eff000 - 0000000037f00000 (ACPI NVS) BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)894MB LOWMEM available.found SMP MP-table at 000f8130On node 0 totalpages: 229104 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225008 pages, LIFO batch:31DMI present.ACPI: RSDP (v000 HP ) @ 0x000f8080ACPI: RSDT (v001 HP 3097 0x20040525 LTP 0x00000000) @ 0x37ef8bcfACPI: FADT (v001 HP 3097 0x20040525 PTL 0x0000005f) @ 0x37efee2aACPI: SSDT (v001 PTLTD POWERNOW 0x20040525 LTP 0x00000001) @ 0x37efee9eACPI: MADT (v001 PTLTD 3097 0x20040525 LTP 0x00000000) @ 0x37efef74ACPI: MCFG (v001 PTLTD MCFG 0x20040525 LTP 0x00000000) @ 0x37efefc4ACPI: DSDT (v001 HP 3091 0x20040525 MSFT 0x0100000e) @ 0x00000000ATI board detected. Disabling timer routing over 8254.ACPI: PM-Timer IO Port: 0x8008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 15:12 APIC version 16ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 50000000 (gap: 40000000:bec00000)Built 1 zonelistsKernel command line: root=/dev/hda5 ro mapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 1795.280 MHz processor.Using pmtmr for high-res timesourceConsole: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 901160k/916416k available (1456k kernel code, 14624k reserved, 566k data, 252k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 3595.59 BogoMIPS (lpj=7191182)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Capability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 256K (64 bytes/line)CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001CPU: AMD Mobile AMD Sempron(tm) Processor 3100+ stepping 02Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeFreeing SMP alternatives: 0k freedENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1checking if image is initramfs... it isFreeing initrd memory: 4129k freedNET: Registered protocol family 16EISA bus registeredACPI: bus type pci registeredPCI: BIOS Bug: MCFG area at e0000000 is not E820-reservedPCI: Not using MMCONFIG.PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5Setting up standard PCI resourcesACPI: Subsystem revision 20060127ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1Boot video device is 0000:01:05.0PCI: Transparent bridge - 0000:00:14.4PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')Please report the result to linux-kernel to fix this permanentlyACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 10 devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportpnp: 00:08: ioport range 0x1080-0x1080 has been reservedpnp: 00:08: ioport range 0x220-0x22f has been reservedpnp: 00:08: ioport range 0x40b-0x40b has been reservedpnp: 00:08: ioport range 0x4d0-0x4d1 has been reservedPCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: c0100000-c01fffff PREFETCH window: c8000000-cfffffffPCI: Bus 6, cardbus bridge: 0000:05:09.0 IO window: 0000a400-0000a4ff IO window: 0000a800-0000a8ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffffPCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: c0200000-c02fffff PREFETCH window: 50000000-51ffffffACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185PCI: Setting latency timer of device 0000:05:09.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 7, 524288 bytes)TCP bind hash table entries: 65536 (order: 6, 262144 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredaudit: initializing netlink socket (disabled)audit(1165688870.896:1): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registered (default)io scheduler deadline registeredio scheduler cfq registeredisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizePNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12serio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1EISA: Probing bus 0 at eisa.0Cannot allocate resource for EISA slot 1Cannot allocate resource for EISA slot 8EISA: Detected 0 cards.TCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8NET: Registered protocol family 20Using IPI Shortcut modeACPI wakeup devices: KBC0 MSE0 P2P AUDO ACPI: (supports S0 S3 S4 S5)Freeing unused kernel memory: 252k freedinput: AT Translated Set 2 keyboard as /class/input/input0ACPI: CPU0 (power states: C1[C1] C2[C2])ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: Thermal Zone [THRM] (31 C)8139too Fast Ethernet driver 0.9.27ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 193eth0: RealTek RTL8139 at 0xa000, 00:16:36:54:15:71, IRQ 193eth0: Identified 8139 chip type 'RTL-8100B/8139D'8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxATIIXP: IDE controller at PCI slot 0000:00:14.1ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 201ATIIXP: chipset revision 0ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pioProbing IDE interface ide0...usbcore: registered new driver usbfsusbcore: registered new driver hubohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)hda: ST960812A, ATA DISK driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...hdc: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM driveide1 at 0x170-0x177,0x376 on irq 15ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 209ehci_hcd 0000:00:13.2: EHCI Host Controllerehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:13.2: irq 209, io mem 0xc0002000ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 8 ports detectedhda: max request size: 128KiBhda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)hda: cache flushes supported hda: hda1 hda2 < hda5 hda6<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 209ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:13.0: irq 209, io mem 0xc0000000 hda7 >hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMAUniform CD-ROM driver Revision: 3.20usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 4 ports detectedACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 209ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:13.1: irq 209, io mem 0xc0001000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 4 ports detectedAttempting manual resumekjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.usb 3-1: new low speed USB device using ohci_hcd and address 2usb 3-1: configuration #1 chosen from 1 choiceieee80211_crypt: registered algorithm 'NULL'input: PC Speaker as /class/input/input1ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185ACPI: PCI interrupt for device 0000:00:14.6 disabledReal Time Clock Driver v1.12acieee80211: 802.11 data/management/control stack, git-1.1.7ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]Yenta: Enabling burst memory read transactionsYenta: Using CSCINT to route CSC interrupts to PCIYenta: Routing CardBus interrupts to PCIYenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x66usbcore: registered new driver hiddevinput: Logitech Optical USB Mouse as /class/input/input2input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driverLinux agpgart interface v0.101 (c) Dave JonesSynaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0Yenta: ISA IRQ mask 0x0ee8, PCI irq 185Socket status: 30000006pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafffcs: IO port probe 0xa000-0xafff: clean.pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffffpcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffffinput: SynPS/2 Synaptics TouchPad as /class/input/input3pci_hotplug: PCI Hot Plug PCI Core version: 0.5shpchp: Standard Hot Plug PCI Controller Driver version: 0.4mice: PS/2 mouse device common for all micets: Compaq touchscreen protocol outputbcm43xx driverACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 217bcm43xx: Chip ID 0x4318, rev 0x2bcm43xx: Number of cores: 4bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabledbcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabledbcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabledbcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabledbcm43xx: PHY connectedbcm43xx: Detected PHY: Version: 3, Type 2, Revision 7bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)bcm43xx: Radio turned offbcm43xx: Radio turned offACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185MC'97 0 converters and GPIO not ready (0x1)ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185cs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: clean.cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87fcs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdfcs: IO port probe 0xa00-0xaff: clean.Adding 1012052k swap on /dev/hda7. Priority:-1 extents:1 across:1012052kEXT3 FS on hda5, internal journalloop: loaded (max 8 devices)device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.compcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.SCSI subsystem initializedlibata version 1.20 loaded.ACPI: Battery Slot [BAT1] (battery present)ACPI: AC Adapter [ACAD] (on-line)ACPI: Power Button (FF) [PWRF]ACPI: Power Button (CM) [PWRB]ACPI: Sleep Button (CM) [SLPB]ACPI: Lid Switch [LID]lp: driver loaded but no devices foundppdev: user-space parallel port driverbcm43xx: PHY connectedbcm43xx: Radio turned onbcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()bcm43xx: Chip initializedbcm43xx: DMA initializedbcm43xx: 80211 cores initializedbcm43xx: Keys clearedbcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()SoftMAC: Open Authentication completed with 00:0e:2e:67:00:83NET: Registered protocol family 10lo: Disabled Privacy ExtensionsIPv6 over IPv4 tunneling drivereth0: no IPv6 routers present