rendered paste body---- LIGNE DE BOOT ----
root=/dev/hda2 ro quiet splash
-----------------------
---- LSUSB ------------
Bus 004 Device 002: ID 0457:0150 Silicon Integrated Systems Corp. Super Talent 1GB Flash Drive
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 07fa:1012 Draytek
Bus 002 Device 001: ID 0000:0000
-----------------------
---- DMESG --------------
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[4294667.296000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[4294667.296000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 447MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 114671
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 110575 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
[4294667.296000] ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bffc2d0
[4294667.296000] ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1bfffb00
[4294667.296000] ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x1bfffb90
[4294667.296000] ACPI: DSDT (v001 INSYDE PN800 0x00001000 INTL 0x02002036) @ 0x00000000
[4294667.296000] ACPI: BIOS age (336) fails cutoff (2000), acpi=force is required to enable ACPI
[4294667.296000] ACPI: Disabling ACPI support
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] Found and enabled local APIC!
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[ 0.000000] Detected 1293.658 MHz processor.
[ 40.171612] Using tsc for high-res timesource
[ 40.172996] Console: colour VGA+ 80x25
[ 40.173274] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 40.173698] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 40.188746] Memory: 443956k/458684k available (1976k kernel code, 14128k reserved, 606k data, 288k init, 0k highmem)
[ 40.188751] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 40.248601] Calibrating delay using timer specific routine.. 2591.56 BogoMIPS (lpj=1295781)
[ 40.248641] Security Framework v1.0.0 initialized
[ 40.248654] SELinux: Disabled at boot.
[ 40.248668] Mount-cache hash table entries: 512
[ 40.248788] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 40.248801] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 40.248812] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 40.248815] CPU: L2 cache: 1024K
[ 40.248818] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000
[ 40.248833] mtrr: v2.0 (20020519)
[ 40.248840] CPU: Intel(R) Celeron(R) M processor 1.30GHz stepping 08
[ 40.248845] Enabling fast FPU save and restore... done.
[ 40.248848] Enabling unmasked SIMD FPU exception support... done.
[ 40.248853] Checking 'hlt' instruction... OK.
[ 40.252822] checking if image is initramfs... it is
[ 41.102943] Freeing initrd memory: 6837k freed
[ 41.215223] NET: Registered protocol family 16
[ 41.215271] EISA bus registered
[ 41.215340] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[ 41.215353] PCI: Using configuration type 1
[ 41.215913] ACPI: Subsystem revision 20051216
[ 41.215916] ACPI: Interpreter disabled.
[ 41.215921] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 41.215928] pnp: PnP ACPI: disabled
[ 41.215935] PnPBIOS: Scanning system for PnP BIOS support...
[ 41.216042] PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
[ 41.216046] PnPBIOS: PnP BIOS version 1.0, entry 0xeb000:0x3536, dseg 0xeb000
[ 41.216056] PNPBIOS fault.. attempting recovery.
[ 41.216107] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
[ 41.216157] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
[ 41.216206] PnPBIOS: Check with your vendor for an updated BIOS
[ 41.216253] PnPBIOS: dev_node_info: unexpected status 0x3a
[ 41.216299] PnPBIOS: Unable to get node info. Aborting.
[ 41.216360] PCI: Probing PCI hardware
[ 41.216366] PCI: Probing PCI hardware (bus 00)
[ 41.217214] PCI quirk: region 1000-107f claimed by vt8235 PM
[ 41.217218] PCI quirk: region 1400-140f claimed by vt8235 SMB
[ 41.217622] Boot video device is 0000:01:00.0
[ 41.218332] PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
[ 41.218409] PCI: Cannot allocate resource region 0 of device 0000:00:06.0
[ 41.221210] PCI: Bridge: 0000:00:01.0
[ 41.221214] IO window: c000-dfff
[ 41.221221] MEM window: c0000000-cfffffff
[ 41.221226] PREFETCH window: 90000000-9fffffff
[ 41.221248] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 41.221723] audit: initializing netlink socket (disabled)
[ 41.221733] audit(1165689241.704:1): initialized
[ 41.221851] VFS: Disk quotas dquot_6.5.1
[ 41.221873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 41.221932] Initializing Cryptographic API
[ 41.221937] io scheduler noop registered
[ 41.221944] io scheduler anticipatory registered
[ 41.221949] io scheduler deadline registered
[ 41.221960] io scheduler cfq registered
[ 41.222136] isapnp: Scanning for PnP cards...
[ 41.579806] isapnp: No Plug & Play device found
[ 41.594689] PNP: No PS/2 controller found. Probing ports directly.
[ 41.603015] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 41.607466] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 41.607978] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 41.608866] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 41.609750] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 41.610635] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 41.610674] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 41.613147] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 41.613205] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 41.613210] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 41.613512] mice: PS/2 mouse device common for all mice
[ 41.614831] EISA: Probing bus 0 at eisa.0
[ 41.614840] Cannot allocate resource for EISA slot 1
[ 41.614873] EISA: Detected 0 cards.
[ 41.614920] NET: Registered protocol family 2
[ 41.625488] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 41.625647] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 41.625760] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 41.625863] TCP: Hash tables configured (established 16384 bind 16384)
[ 41.625866] TCP reno registered
[ 41.625970] TCP bic registered
[ 41.625978] NET: Registered protocol family 1
[ 41.625986] NET: Registered protocol family 8
[ 41.625989] NET: Registered protocol family 20
[ 41.626013] Using IPI Shortcut mode
[ 41.626057] Freeing unused kernel memory: 288k freed
[ 41.640525] input: AT Translated Set 2 keyboard as /class/input/input0
[ 41.685766] vga16fb: initializing
[ 41.685776] vga16fb: mapped to 0xc00a0000
[ 41.834156] Console: switching to colour frame buffer device 80x25
[ 41.834161] fb0: VGA16 VGA frame buffer device
[ 43.021154] Capability LSM initialized
[ 43.502222] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 43.502257] VP_IDE: chipset revision 6
[ 43.502260] VP_IDE: not 100% native mode: will probe irqs later
[ 43.502274] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 43.502287] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[ 43.502307] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[ 43.502324] Probing IDE interface ide0...
[ 43.887585] hda: ST950212A, ATA DISK drive
[ 44.500763] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 44.500910] Probing IDE interface ide1...
[ 45.294370] hdc: UJDA770 DVD/CDRW, ATAPI CD/DVD-ROM drive
[ 45.600302] ide1 at 0x170-0x177,0x376 on irq 15
[ 45.606933] hda: max request size: 1024KiB
[ 45.677431] hda: 97692174 sectors (50018 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 45.677572] hda: cache flushes supported
[ 45.677726] hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[ 45.726537] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 45.726548] Uniform CD-ROM driver Revision: 3.20
[ 46.271270] usbcore: registered new driver usbfs
[ 46.271503] usbcore: registered new driver hub
[ 46.272983] USB Universal Host Controller Interface driver v2.3
[ 46.273947] PCI: Found IRQ 11 for device 0000:00:10.0
[ 46.273978] PCI: Sharing IRQ 11 with 0000:00:12.0
[ 46.273982] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 46.273995] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 46.275071] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 46.275085] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 46.276596] hub 1-0:1.0: USB hub found
[ 46.276608] hub 1-0:1.0: 2 ports detected
[ 46.377569] PCI: Found IRQ 7 for device 0000:00:10.1
[ 46.377615] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 46.377730] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 46.377743] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 46.378000] hub 2-0:1.0: USB hub found
[ 46.378008] hub 2-0:1.0: 2 ports detected
[ 46.478368] PCI: Found IRQ 5 for device 0000:00:10.2
[ 46.478391] PCI: Sharing IRQ 5 with 0000:00:11.5
[ 46.478395] PCI: Sharing IRQ 5 with 0000:00:11.6
[ 46.478406] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 46.478512] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 46.478521] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 46.478754] hub 3-0:1.0: USB hub found
[ 46.478762] hub 3-0:1.0: 2 ports detected
[ 46.580952] PCI: Found IRQ 10 for device 0000:00:10.3
[ 46.581002] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 46.581244] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 46.581257] ehci_hcd 0000:00:10.3: irq 10, io mem 0xf0000000
[ 46.581267] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 46.581535] hub 4-0:1.0: USB hub found
[ 46.581546] hub 4-0:1.0: 6 ports detected
[ 46.828770] Attempting manual resume
[ 46.867944] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.868071] kjournald starting. Commit interval 5 seconds
[ 47.310532] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 47.933009] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 59.818234] Linux agpgart interface v0.101 (c) Dave Jones
[ 59.822142] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 59.825130] agpgart: AGP aperture is 32M @ 0xa0000000
[ 60.208246] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 60.223981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 60.311164] irda_init()
[ 60.311180] NET: Registered protocol family 23
[ 60.864555] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[ 60.864830] PCI: Found IRQ 11 for device 0000:00:12.0
[ 60.864872] PCI: Sharing IRQ 11 with 0000:00:10.0
[ 60.864889] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 60.869066] eth0: VIA Rhine II at 0x1e200, 00:40:d0:94:f3:f3, IRQ 11.
[ 60.869788] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 60.898376] rt61: module license 'unspecified' taints kernel.
[ 60.899910] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[ 60.899921] PCI: No IRQ known for interrupt pin A of device 0000:00:06.0. Please try using pci=biosirq.
[ 60.899931] RT61: Vendor = 0x1814, Product = 0x0301
[ 60.900017] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 61.140548] SCSI subsystem initialized
[ 61.193115] PCI: Found IRQ 5 for device 0000:00:11.6
[ 61.193138] PCI: Sharing IRQ 5 with 0000:00:10.2
[ 61.193147] PCI: Sharing IRQ 5 with 0000:00:11.5
[ 61.214408] PCI: Found IRQ 5 for device 0000:00:11.5
[ 61.214431] PCI: Sharing IRQ 5 with 0000:00:10.2
[ 61.214442] PCI: Sharing IRQ 5 with 0000:00:11.6
[ 61.214605] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 61.239272] Initializing USB Mass Storage driver...
[ 61.239389] scsi0 : SCSI emulation for USB Mass Storage devices
[ 61.239451] usb-storage: device found at 2
[ 61.239453] usb-storage: waiting for device to settle before scanning
[ 61.239464] usbcore: registered new driver usb-storage
[ 61.239467] USB Mass Storage support registered.
[ 61.750972] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000
[ 61.803819] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 61.836461] ts: Compaq touchscreen protocol output
[ 61.941947] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 62.442721] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 62.948713] lp: driver loaded but no devices found
[ 63.006972] Adding 409616k swap on /dev/hda6. Priority:-1 extents:1 across:409616k
[ 63.132389] EXT3 FS on hda2, internal journal
[ 63.309159] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 63.309165] md: bitmap version 4.39
[ 64.586995] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 65.522774] cdrom: open failed.
[ 66.237240] Vendor: SiS-150a Model: USB2FlashStorage Rev: 0.00
[ 66.237257] Type: Direct-Access ANSI SCSI revision: 02
[ 66.239179] usb-storage: device scan complete
[ 66.287241] Driver 'sd' needs updating - please use bus_type methods
[ 66.288961] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[ 66.289662] sda: Write Protect is off
[ 66.289665] sda: Mode Sense: 00 00 00 00
[ 66.289667] sda: assuming drive cache: write through
[ 66.293116] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[ 66.294114] sda: Write Protect is off
[ 66.294116] sda: Mode Sense: 00 00 00 00
[ 66.294119] sda: assuming drive cache: write through
[ 66.294124] sda: sda1
[ 66.295379] sd 0:0:0:0: Attached scsi removable disk sda
[ 66.314975] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 67.486187] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 67.552671] NTFS volume version 3.1.
[ 67.591015] kjournald starting. Commit interval 5 seconds
[ 67.591126] EXT3 FS on hda5, internal journal
[ 67.591132] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.985210] capifs: Rev 1.1.2.3
[ 77.671012] ppdev: user-space parallel port driver
[ 78.086344] apm: BIOS not found.
[ 78.859855] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[ 86.095565] Bluetooth: Core ver 2.8
[ 86.095572] NET: Registered protocol family 31
[ 86.095574] Bluetooth: HCI device and connection manager initialized
[ 86.095589] Bluetooth: HCI socket layer initialized
[ 86.173580] Bluetooth: L2CAP ver 2.8
[ 86.173586] Bluetooth: L2CAP socket layer initialized
[ 86.190165] Bluetooth: RFCOMM socket layer initialized
[ 86.190183] Bluetooth: RFCOMM TTY layer initialized
[ 86.190185] Bluetooth: RFCOMM ver 1.7