;; Configuration file of OpenH323 channel driver;;-----------------------------------------; General configuration options; (ports, jitter, GK, ...);-----------------------------------------[general];; Address to bind to for incoming connections.; Default is ALL.;listenAddress=0.0.0.0;; Port to listen to.; Default value is 1720.;listenPort=1720;; Configure the TCP port range to be used by H.323;tcpStart=10000tcpEnd=20000;; Configure the UDP port range to be used by H.323; Note: The port range used by RTP are configured from; "rtp.conf";udpStart=10000udpEnd=20000;; Enable fast start (yes,no).;fastStart=no;; Enable H.245 tunnelling (yes,no).;h245Tunnelling=no;; Enable early H.245 messages in call SETUP message.;h245inSetup=no;; Enable in-band-DTMF detection.;; Enable early H.245 messages in call SETUP message.;h245inSetup=no;; Enable in-band-DTMF detection.; (Note: Netmeeting uses in-band DTMFs);inBandDTMF=no;; Set jitter buffer (in milliseconds, 20...10000).;jitterMin=20jitterMax=100;; Set IP Type-of-Service byte for RTP channels.; Valid values for this option are:; lowdelay, throughput, reliability, mincost, none; Moreover, an integer (in decimal or hex format) may be entered.;ipTos=none;; Set the maximum number of inbound/outbound/simultaneous; Set the maximum number of inbound/outbound/simultaneous; H.323 connections.;outboundMax=10inboundMax=10simultaneousMax=10;; Call Rate Limiter params (ingress direction). When the total number; of active calls is above 'crlThreshold' then the rate of the incoming; H.323 calls is restricted in a way where no more than 'crlCallNumber'; calls are allowed in 'crlCallTime' milliseconds, thus limiting the rate; of incoming calls to:; 'crlCallNumber' / ('crlCallTime' / 1000) Calls-per-Sec.;;crlCallNumber=20;crlCallTime=20000;crlThreshold=30;; Set the bandwidth limit for H.323 connections.; The value is in Kbps.;;bandwidthLimit=1024;; Set tracing options for the wrapper library and for the; OpenH323 library.; libTraceFile can be 'stdout' or a full path name to the tracefile.; Only the trace info for OpenH323 is logged in libTraceFile.;wrapLibTraceLevel=1libTraceLevel=0libTraceFile=stdout;; Disable gatekeeper or specify a gatekeeper. The gatekeeper's ID is the zone name.; Valid values for this option are:; DISABLE,; DISCOVER,; <gatekeeper's DNS name>,; <gatekeeper's ip>,; GKID:<gatekeeper's id>; <gatekeeper's id>@<gatekeeper's name or address>;;gatekeeper=192.168.1.2gatekeeper=DISABLE;; Set the gatekeeper registration timeout. Before the expiration of; the timeout, a re-registration is attempted.;gatekeeperTTL=600;; Set the mode for sending user-input (DTMF); Valid values for this option are:; Q931 - Q.931 Keypad Information Element; STRING - H.245 string; TONE - H.245 tone; RFC2833 - RFC2833;userInputMode=TONE;; AMA flags (default, omit, billing, documentation);amaFlags=billing;; Account code;accountCode=H323;;; Default language;language=en;; Default Music-On-Hold class;musiconhold=default;; Set the default context of H.323 calls.;context=oh323-in;-----------------------------------------; Configure H.323 aliases, prefixes and; related ASTERISK's contexts;-----------------------------------------[register];; Aliases/prefixes associated with the default context; defined in section [general].;alias=asteriskalias=123;; Aliases/prefixes routed in "all-aliases" context.;;context=all-aliases;alias=ASTERISK;alias=666;; Aliases/prefixes routed in "more-aliases" context.;;context=more-aliases;alias=665;; Aliases/prefixes routed in "all-prefixes" context.;;context=all-prefixes;gwprefix=00;gwprefix=01;; Aliases/prefixes routed in "more-stuff" context.;codec=G711A;frames=20;codec=G711U;frames=20;codec=GSM0610;frames=4;codec=G7231;frames=2codec=G729frames=2codec=G729Aframes=2;codec=G7231