rendered paste bodymoulis@moulisland:~$ sudo modprobe pppoatm
Password:
moulis@moulisland:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[17179569.184000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5c80
[17179569.184000] On node 0 totalpages: 131056
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126960 pages, LIFO batch:31
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 AWARD ) @ 0x000f75e0
[17179569.184000] ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[17179569.184000] ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[17179569.184000] ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff68c0
[17179569.184000] ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2606.256 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.476000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.476000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.488000] Memory: 509804k/524224k available (1910k kernel code, 13836k reserved, 1070k data, 308k init, 0k highmem)
[17179569.488000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.568000] Calibrating delay using timer specific routine.. 5216.91 BogoMIPS (lpj=10433832)
[17179569.568000] Security Framework v1.0.0 initialized
[17179569.568000] SELinux: Disabled at boot.
[17179569.568000] Mount-cache hash table entries: 512
[17179569.568000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179569.568000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179569.568000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179569.568000] CPU: L2 cache: 128K
[17179569.568000] CPU: Hyper-Threading is disabled
[17179569.568000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179569.568000] Checking 'hlt' instruction... OK.
[17179569.584000] SMP alternatives: switching to UP code
[17179569.584000] Freeing SMP alternatives: 16k freed
[17179569.584000] checking if image is initramfs... it is
[17179570.092000] Freeing initrd memory: 5563k freed
[17179570.092000] ACPI: Core revision 20060707
[17179570.092000] ACPI: Looking for DSDT ... not found!
[17179570.096000] CPU0: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
[17179570.096000] Total of 1 processors activated (5216.91 BogoMIPS).
[17179570.096000] ENABLING IO-APIC IRQs
[17179570.096000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.240000] Brought up 1 CPUs
[17179570.240000] migration_cost=0
[17179570.240000] NET: Registered protocol family 16
[17179570.240000] EISA bus registered
[17179570.240000] ACPI: bus type pci registered
[17179570.244000] PCI: PCI BIOS revision 2.10 entry at 0xfb920, last bus=1
[17179570.244000] PCI: Using configuration type 1
[17179570.244000] Setting up standard PCI resources
[17179570.260000] ACPI: Interpreter enabled
[17179570.260000] ACPI: Using IOAPIC for interrupt routing
[17179570.260000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.260000] PCI: Probing PCI hardware (bus 00)
[17179570.260000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.264000] Uncovering SIS963 that hid as a SIS503 (compatible=1)
[17179570.264000] Enabling SiS 96x SMBus.
[17179570.264000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
[17179570.264000] Boot video device is 0000:01:00.0
[17179570.264000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.284000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[17179570.284000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[17179570.288000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[17179570.288000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[17179570.288000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[17179570.288000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[17179570.288000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[17179570.288000] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 14 15)
[17179570.292000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.292000] pnp: PnP ACPI init
[17179570.296000] pnp: PnP ACPI: found 11 devices
[17179570.296000] PnPBIOS: Disabled by ACPI PNP
[17179570.296000] PCI: Using ACPI for IRQ routing
[17179570.296000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.336000] PCI: Bridge: 0000:00:01.0
[17179570.336000] IO window: disabled.
[17179570.336000] MEM window: e0000000-e1ffffff
[17179570.336000] PREFETCH window: d8000000-dfffffff
[17179570.336000] NET: Registered protocol family 2
[17179570.376000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.376000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.376000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.376000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.376000] TCP reno registered
[17179570.376000] audit: initializing netlink socket (disabled)
[17179570.376000] audit(1165356751.376:1): initialized
[17179570.376000] VFS: Disk quotas dquot_6.5.1
[17179570.376000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.376000] Initializing Cryptographic API
[17179570.376000] io scheduler noop registered
[17179570.376000] io scheduler anticipatory registered
[17179570.376000] io scheduler deadline registered
[17179570.376000] io scheduler cfq registered (default)
[17179570.376000] isapnp: Scanning for PnP cards...
[17179570.732000] isapnp: No Plug & Play device found
[17179570.828000] Real Time Clock Driver v1.12ac
[17179570.828000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.828000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.828000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.828000] mice: PS/2 mouse device common for all mice
[17179570.832000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.832000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.832000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.832000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179570.832000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179570.832000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.836000] EISA: Probing bus 0 at eisa.0
[17179570.836000] Cannot allocate resource for EISA slot 1
[17179570.836000] Cannot allocate resource for EISA slot 4
[17179570.836000] EISA: Detected 0 cards.
[17179570.836000] TCP bic registered
[17179570.836000] NET: Registered protocol family 1
[17179570.836000] NET: Registered protocol family 8
[17179570.836000] NET: Registered protocol family 20
[17179570.836000] Using IPI No-Shortcut mode
[17179570.836000] ACPI: (supports S0 S1 S4 S5)
[17179570.836000] Freeing unused kernel memory: 308k freed
[17179570.852000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.060000] Capability LSM initialized
[17179572.116000] ACPI: Fan [FAN] (on)
[17179572.120000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179572.120000] ACPI: Getting cpuindex for acpiid 0x1
[17179572.120000] ACPI: Thermal Zone [THRM] (40 C)
[17179572.876000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179572.876000] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.876000] SIS5513: chipset revision 0
[17179572.876000] SIS5513: not 100% native mode: will probe irqs later
[17179572.876000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[17179572.876000] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
[17179572.876000] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
[17179572.876000] Probing IDE interface ide0...
[17179573.176000] hda: WDC WD800BB-00JHC0, ATA DISK drive
[17179573.460000] hdb: WDC WD200BB-00AUA1, ATA DISK drive
[17179573.520000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.536000] Probing IDE interface ide1...
[17179574.276000] hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
[17179575.064000] hdd: TEAC CD-W552D, ATAPI CD/DVD-ROM drive
[17179575.124000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.136000] hda: max request size: 128KiB
[17179575.160000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179575.160000] hda: cache flushes supported
[17179575.160000] hda: hda1
[17179575.172000] hdb: max request size: 128KiB
[17179575.172000] hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[17179575.172000] hdb: cache flushes not supported
[17179575.172000] hdb: hdb1 hdb2 < hdb5 >
[17179575.220000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179575.220000] Uniform CD-ROM driver Revision: 3.20
[17179575.260000] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.652000] usbcore: registered new driver usbfs
[17179575.652000] usbcore: registered new driver hub
[17179575.656000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.656000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 177
[17179575.656000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[17179575.656000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[17179575.684000] ohci_hcd 0000:00:03.0: irq 177, io mem 0xe2023000
[17179575.748000] usb usb1: configuration #1 chosen from 1 choice
[17179575.748000] hub 1-0:1.0: USB hub found
[17179575.748000] hub 1-0:1.0: 3 ports detected
[17179575.856000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
[17179575.856000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[17179575.856000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[17179575.884000] ohci_hcd 0000:00:03.1: irq 185, io mem 0xe2020000
[17179575.944000] usb usb2: configuration #1 chosen from 1 choice
[17179575.944000] hub 2-0:1.0: USB hub found
[17179575.944000] hub 2-0:1.0: 3 ports detected
[17179576.052000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 193
[17179576.052000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[17179576.052000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[17179576.052000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[17179576.052000] ehci_hcd 0000:00:03.3: irq 193, io mem 0xe2021000
[17179576.052000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.052000] usb usb3: configuration #1 chosen from 1 choice
[17179576.052000] hub 3-0:1.0: USB hub found
[17179576.052000] hub 3-0:1.0: 6 ports detected
[17179576.220000] Attempting manual resume
[17179576.260000] kjournald starting. Commit interval 5 seconds
[17179576.260000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.928000] usb 3-3: new high speed USB device using ehci_hcd and address 3
[17179577.076000] usb 3-3: configuration #1 chosen from 1 choice
[17179577.260000] ohci_hcd 0000:00:03.0: wakeup
[17179577.340000] ohci_hcd 0000:00:03.1: wakeup
[17179577.724000] usb 1-1: new full speed USB device using ohci_hcd and address 3
[17179578.024000] usb 1-1: configuration #1 chosen from 1 choice
[17179578.332000] usb 2-2: new low speed USB device using ohci_hcd and address 2
[17179578.568000] usb 2-2: configuration #1 chosen from 1 choice
[17179589.164000] Floppy drive(s): fd0 is 1.44M
[17179589.212000] FDC 0 is a post-1991 82077
[17179589.220000] parport: PnPBIOS parport detected.
[17179589.220000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179589.332000] input: PC Speaker as /class/input/input1
[17179589.348000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[17179589.360000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.364000] agpgart: Detected SiS 648 chipset
[17179589.376000] agpgart: AGP aperture is 128M @ 0xd0000000
[17179589.436000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.440000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.632000] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xec00, speed 1104kHz
[17179589.668000] sis900.c: v1.08.09 Sep. 19 2005
[17179589.672000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179589.672000] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[17179589.672000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[17179589.672000] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[17179589.672000] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 8.
[17179589.676000] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[17179589.680000] 0000:00:04.0: Unknown PHY transceiver found at address 11.
[17179589.680000] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[17179589.680000] 0000:00:04.0: Unknown PHY transceiver found at address 13.
[17179589.680000] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[17179589.680000] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[17179589.684000] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[17179589.684000] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[17179589.684000] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[17179589.684000] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[17179589.684000] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[17179589.688000] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[17179589.692000] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[17179589.692000] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[17179589.692000] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[17179589.692000] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[17179589.692000] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[17179589.716000] 0000:00:04.0: Using transceiver found at address 1 as default
[17179589.716000] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 201, 00:0d:87:48:74:fb.
[17179590.000000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 209
[17179590.372000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 209
[17179590.472000] usbcore: registered new driver hiddev
[17179590.484000] input: Microsoft Microsoft Wheel Mouse OpticalοΏ½ as /class/input/input2
[17179590.484000] input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalοΏ½] on usb-0000:00:03.1-2
[17179590.484000] usbcore: registered new driver usbhid
[17179590.484000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.492000] usbcore: registered new driver libusual
[17179590.600000] ts: Compaq touchscreen protocol output
[17179590.644000] SCSI subsystem initialized
[17179590.648000] Initializing USB Mass Storage driver...
[17179590.648000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179590.648000] usbcore: registered new driver usb-storage
[17179590.648000] USB Mass Storage support registered.
[17179590.652000] usb-storage: device found at 3
[17179590.652000] usb-storage: waiting for device to settle before scanning
[17179590.692000] intel8x0_measure_ac97_clock: measured 58551 usecs
[17179590.692000] intel8x0: clocking to 48000
[17179590.968000] lp0: using parport0 (interrupt-driven).
[17179591.016000] Adding 835340k swap on /dev/disk/by-uuid/5a12a689-644d-4264-af2f-03482292660c. Priority:-1 extents:1 across:835340k
[17179591.084000] EXT3 FS on hdb1, internal journal
[17179592.632000] NET: Registered protocol family 17
[17179595.656000] usb-storage: device scan complete
[17179595.656000] Vendor: USB Model: Flash Disk Rev: 1100
[17179595.656000] Type: Direct-Access ANSI SCSI revision: 00
[17179595.680000] SCSI device sda: 1981440 512-byte hdwr sectors (1014 MB)
[17179595.684000] sda: Write Protect is off
[17179595.684000] sda: Mode Sense: 43 00 00 00
[17179595.684000] sda: assuming drive cache: write through
[17179595.684000] SCSI device sda: 1981440 512-byte hdwr sectors (1014 MB)
[17179595.688000] sda: Write Protect is off
[17179595.688000] sda: Mode Sense: 43 00 00 00
[17179595.688000] sda: assuming drive cache: write through
[17179595.688000] sda: unknown partition table
[17179595.688000] sd 0:0:0:0: Attached scsi removable disk sda
[17179595.716000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179597.456000] ACPI: Power Button (FF) [PWRF]
[17179597.456000] ACPI: Power Button (CM) [PWRB]
[17179597.592000] ibm_acpi: ec object not found
[17179597.624000] pcc_acpi: loading...
[17179600.588000] NET: Registered protocol family 10
[17179600.592000] lo: Disabled Privacy Extensions
[17179600.592000] IPv6 over IPv4 tunneling driver
[17179601.520000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179601.520000] apm: overridden by ACPI.
[17179606.828000] Bluetooth: Core ver 2.8
[17179606.828000] NET: Registered protocol family 31
[17179606.828000] Bluetooth: HCI device and connection manager initialized
[17179606.828000] Bluetooth: HCI socket layer initialized
[17179606.916000] Bluetooth: L2CAP ver 2.8
[17179606.916000] Bluetooth: L2CAP socket layer initialized
[17179606.924000] Bluetooth: RFCOMM socket layer initialized
[17179606.924000] Bluetooth: RFCOMM TTY layer initialized
[17179606.924000] Bluetooth: RFCOMM ver 1.7
[17179619.688000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179691.772000] CSLIP: code copyright 1989 Regents of the University of California
[17179691.780000] PPP generic driver version 2.4.2
moulis@moulisland:~$ pon ueagle-atm
Plugin pppoatm.so loaded.
moulis@moulisland:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15124 (14.7 KiB) TX bytes:15124 (14.7 KiB)
moulis@moulisland:~$ plog
Dec 5 22:15:15 moulisland pppd[4772]: Plugin pppoatm.so loaded.
Dec 5 22:15:15 moulisland pppd[4774]: pppd 2.4.4 started by moulis, uid 1000
Dec 5 22:15:15 moulisland pppd[4774]: connect(8.35): No such device
Dec 5 22:15:15 moulisland pppd[4774]: Exit.
moulis@moulisland:~$