rendered paste bodysmartctl version 5.36 [x86_64-mandriva-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3160828AS
Serial Number: 5MT47JTL
Firmware Version: 8.04
User Capacity: 160,000,000,000 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Dec 5 09:56:42 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 94) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 052 050 006 Pre-fail Always - 140006847
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 97
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 52418419
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4756
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16
194 Temperature_Celsius 0x0022 026 040 000 Old_age Always - 26 (Lifetime Min/Max 0/15)
195 Hardware_ECC_Recovered 0x001a 052 050 000 Old_age Always - 140006847
197 Current_Pending_Sector 0x0012 034 034 000 Old_age Always - 1293
198 Offline_Uncorrectable 0x0010 034 034 000 Old_age Offline - 1293
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 166 063 000 Old_age Always - 190
SMART Error Log Version: 1
ATA Error Count: 96 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 96 occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c9 88 40 e1 Error: UNC at LBA = 0x014088c9 = 21006537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c9 88 40 e1 00 00:02:57.055 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:54.184 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:51.320 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:48.401 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:45.548 READ DMA
Error 95 occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c9 88 40 e1 Error: UNC at LBA = 0x014088c9 = 21006537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c9 88 40 e1 00 00:02:57.055 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:54.184 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:51.320 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:48.401 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:45.548 READ DMA
Error 94 occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c9 88 40 e1 Error: UNC at LBA = 0x014088c9 = 21006537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c9 88 40 e1 00 00:02:57.055 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:54.184 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:51.320 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:48.401 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:45.548 READ DMA
Error 93 occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c9 88 40 e1 Error: UNC at LBA = 0x014088c9 = 21006537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c9 88 40 e1 00 00:02:57.055 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:54.184 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:51.320 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:48.401 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:45.548 READ DMA
Error 92 occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c9 88 40 e1 Error: UNC at LBA = 0x014088c9 = 21006537
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c9 88 40 e1 00 00:02:39.420 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:54.184 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:51.320 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:48.401 READ DMA
c8 00 08 c9 88 40 e1 00 00:02:45.548 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed: read failure 90% 4756 21006537
# 2 Short captive Completed: read failure 90% 4755 3407959
# 3 Short captive Completed without error 00% 2157 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay