rendered paste bodyalinux@ubuntu:~$ smartctl -l long /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=======> INVALID ARGUMENT TO -l: long
=======> VALID ARGUMENTS ARE: error, selftest, selective, directory <=======
Use smartctl -h to get a usage summary
alinux@ubuntu:~$ smartctl -t long /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Smartctl open device: /dev/hda failed: Permission denied
alinux@ubuntu:~$ sudo smartctl -t long /dev/hda
Password:
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-li ne mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 65 minutes for test to complete.
Test will complete after Wed Oct 26 22:10:23 2005
Use smartctl -X to abort test.
alinux@ubuntu:~$ sudo smartctl -a /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK6021GAS
Serial Number: 33GL2597T
Firmware Version: GA023A
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Oct 26 21:13:24 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 587) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 65) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1289
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3012
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 2
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 6003
10 Spin_Retry_Count 0x0033 159 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1978
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 263
193 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 246091
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 41 (Lifetime Min/Max 11/65)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 73
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 99
222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4342
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 157
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 451 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 451 occurred at disk power-on lifetime: 5970 hours (248 days + 18 hours)
When the command that caused the error occurred, the device was active or idle .
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 86 49 96 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00964986 = 984922 2
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 08 7f 49 96 e0 00 00:19:21.223 READ DMA
ef 03 45 01 00 00 a0 02 00:19:21.211 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 a0 02 00:19:21.211 SET FEATURES [Set transfer mode]
c6 03 10 01 00 00 a0 02 00:19:21.211 SET MULTIPLE MODE
91 03 3f 01 00 00 af 02 00:19:21.210 INITIALIZE DEVICE PARAMETERS [OBS-6 ]
Error 450 occurred at disk power-on lifetime: 5968 hours (248 days + 16 hours)
When the command that caused the error occurred, the device was active or idle .
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 de 25 41 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x004125de = 426953 4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 08 d7 25 41 e0 00 00:18:04.408 READ DMA
ef 03 45 01 00 00 a0 02 00:18:04.396 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 a0 02 00:18:04.396 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 02 00:18:04.395 SET MULTIPLE MODE
91 00 3f 01 00 00 af 02 00:18:04.395 INITIALIZE DEVICE PARAMETERS [OBS-6 ]
Error 449 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours)
When the command that caused the error occurred, the device was active or idle .
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 26 7d 2f 5e e5 00 01:27:43.812 READ DMA
c8 00 28 7b 2f 5e e5 00 01:27:35.340 READ DMA
c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA
c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA
c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA
Error 448 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours)
When the command that caused the error occurred, the device was active or idle .
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 7b 2f 5e e5 00 01:27:35.340 READ DMA
c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA
c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA
c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA
c8 00 30 73 2f 5e e5 00 01:27:01.468 READ DMA
Error 447 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours)
When the command that caused the error occurred, the device was active or idle .
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA
c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA
c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA
c8 00 30 73 2f 5e e5 00 01:27:01.468 READ DMA
c8 00 32 71 2f 5e e5 00 01:26:53.010 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
alinux@ubuntu:~$