rendered paste bodyBootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Linux version 2.6.9-42.ELsmp (buildcentos@mehak.karan.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Aug 15 10:35:26 BST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff80000 (usable)
BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data)
BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS)
BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa4e0
ACPI: RSDT (v001 A M I OEMRSDT 0x08000601 MSFT 0x00000097) @ 0x00000000bff80000
ACPI: FADT (v001 A M I OEMFACP 0x08000601 MSFT 0x00000097) @ 0x00000000bff80200
ACPI: MADT (v001 A M I OEMAPIC 0x08000601 MSFT 0x00000097) @ 0x00000000bff80390
ACPI: OEMB (v001 A M I AMI_OEM 0x08000601 MSFT 0x00000097) @ 0x00000000bff8e040
ACPI: MCFG (v001 A M I OEMMCFG 0x08000601 MSFT 0x00000097) @ 0x00000000bff889c0
ACPI: DSDT (v001 A0590 A0590001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
No mptable found.
On node 0 totalpages: 1310720
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 1306624 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Setting APIC routing to flat
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000)
Checking aperture...
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2404.169 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x1ca5000 - 0x5ca5000
Memory: 4036572k/5242880k available (2105k kernel code, 0k reserved, 1297k data, 196k init)
Calibrating delay using timer specific routine.. 4812.64 BogoMIPS (lpj=2406321)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
Using IO APIC NMI watchdog
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
per-CPU timeslice cutoff: 521.67 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 rip 6000 rsp 10005d75f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 4807.54 BogoMIPS (lpj=2403774)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
Total of 2 processors activated (9620.19 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 16.695 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
time.c: Using PIT/TSC based timekeeping.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at f0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 185
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 193
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 185
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:08:0e.0[A] -> GSI 18 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 23 sharing vector 0xE1 and IRQ 23
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 225
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1164719296.468:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 40E182233A4BCA05
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
P0P1 P0P3 P0P5 P0P6 P0P7 P0P8 P0P9 UAR1 USB2 USB3 USB4 MC97 USB1 EUSB P0P4
Freeing unused kernel memory: 196k freed
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 217
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 217
ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:be01 87:4763 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
isa bounce pool size: 16 pages
Vendor: ATA Model: Hitachi HDT72504 Rev: V5CO
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 355 types, 26 bools
security: 55 classes, 22582 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-42.ELsmp
floppy0: no floppy controllers found
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.1 addr 0xff7fc000 irq 169 Yukon-EC (0xb6) rev 2
divert: allocating divert_blk for eth0
sky2 eth0: addr 00:18:f3:58:2c:88
MSI INIT SUCCESS
ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Both _OSC and OSHP methods do not exist
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Both _OSC and OSHP methods do not exist
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Both _OSC and OSHP methods do not exist
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 185
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 185, pci mem ffffff000006ec00
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 185, io base 000000000000e480
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 193, io base 000000000000e800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 201, io base 000000000000e880
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 177, io base 000000000000ec00
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-4: new high speed USB device using address 4
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb 2-2: new full speed USB device using address 2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2
usb 3-1: new low speed USB device using address 2
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80405540(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
input: USB HID v1.11 Keyboard [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1
input: USB HID v1.11 Device [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1
usb 1-4.1: new high speed USB device using address 5
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high speed USB device using address 6
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: Flash HS-CF Rev: 4.49
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
USB Mass Storage device found at 6
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 3780 MBytes.
[fglrx] module loaded - fglrx 8.31.5 [Nov 9 2006] on minor 0
ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
mtrr: type mismatch for dffc0000,20000 old: uncachable new: write-combining
mtrr: type mismatch for dff80000,40000 old: uncachable new: write-combining
mtrr: type mismatch for dff00000,80000 old: uncachable new: write-combining
mtrr: type mismatch for dfe00000,100000 old: uncachable new: write-combining
mtrr: type mismatch for dfc00000,200000 old: uncachable new: write-combining
mtrr: type mismatch for df800000,400000 old: uncachable new: write-combining
mtrr: type mismatch for df000000,800000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,1000000 old: uncachable new: write-combining
mtrr: type mismatch for dc000000,2000000 old: uncachable new: write-combining
mtrr: type mismatch for d8000000,4000000 old: uncachable new: write-combining
mtrr: type mismatch for d0000000,8000000 old: uncachable new: write-combining
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
ACPI: Power Button (FF) [PWRF]
EXT3 FS on dm-0, internal journal
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 456 bytes per conntrack
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
mtrr: type mismatch for d0000000,10000000 old: uncachable new: write-combining
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx] total GART = 134217728
[fglrx] free GART = 118226944
[fglrx] max single GART = 118226944
[fglrx] total LFB = 249819136
[fglrx] free LFB = 217051136
[fglrx] max single LFB = 217051136
[fglrx] total Inv = 268435456
[fglrx] free Inv = 268435456
[fglrx] max single Inv = 268435456
[fglrx] total TIM = 0
mtrr: type mismatch for d11a0000,1000 old: uncachable new: write-combining
mtrr: type mismatch for d1180000,20000 old: uncachable new: write-combining
mtrr: type mismatch for d1100000,80000 old: uncachable new: write-combining
mtrr: type mismatch for d1000000,100000 old: uncachable new: write-combining
mtrr: type mismatch for d0000000,1000000 old: uncachable new: write-combining
loop: loaded (max 8 devices)
usb 1-4: USB disconnect, address 4
usb 1-4.1: USB disconnect, address 5
usb 1-4.1.1: USB disconnect, address 6
usb 1-4: new high speed USB device using address 7
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high speed USB device using address 8
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high speed USB device using address 9
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: Flash HS-CF Rev: 4.49
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
USB Mass Storage device found at 9
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
usb 1-4: USB disconnect, address 7
usb 1-4.1: USB disconnect, address 8
usb 1-4.1.1: USB disconnect, address 9
usb 1-4: new high speed USB device using address 10
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high speed USB device using address 11
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high speed USB device using address 12
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: Flash HS-CF Rev: 4.49
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
USB Mass Storage device found at 12
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.