neric identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Duron(tm) processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 899.0881 MHz.
..... host bus clock speed is 199.0973 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 3112, rev 00): [55] f9 & 1f -> 19
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
spurious 8259A interrupt: IRQ7.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-307030, ATA DISK drive
hdb: ST380021A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8480B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0f.0
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 11, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:02:08.0: OHCI Host Controller
ohci_hcd 0000:02:08.0: irq 12, pci mem e0002000
ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:02:08.1: OHCI Host Controller
ohci_hcd 0000:02:08.1: irq 11, pci mem e0004000
ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 4
usb 3-2: new low speed USB device using address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 4-2: new full speed USB device using address 2
ehci_hcd 0000:02:08.2: EHCI Host Controller
ehci_hcd 0000:02:08.2: irq 10, pci mem e0008000
ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:08.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 3-2: USB disconnect, address 2
usb 4-2: USB disconnect, address 2
usb 4-2: new full speed USB device using address 3
usb 3-2: new low speed USB device using address 3
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[d8006000-d80067ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042b50000ccf8]
drivers/usb/core/usb.c: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Supermount version 2.0.4 for kernel 2.6
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
loop: loaded (max 256 devices)
gzloop: loaded
/sysroot/live_tree_boot.clp: 555 blocks, 65536 bytes/block, largest block is 65492 bytes.
ISO 9660 Extensions: RRIP_1991A
/sysroot/live_tree_always.clp: 658 blocks, 65536 bytes/block, largest block is 60853 bytes.
ISO 9660 Extensions: RRIP_1991A
/sysroot/live_tree_totem.clp: 226 blocks, 65536 bytes/block, largest block is 47791 bytes.
ISO 9660 Extensions: RRIP_1991A
/sysroot/cdrom/live_tree.clp: 17836 blocks, 65536 bytes/block, largest block is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 272k freed
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: USB Storage-SMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Generic Model: USB Storage-CFC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Generic Model: USB Storage-MMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Generic Model: USB Storage-MSC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_mux: aa55f00f52ad51(80)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport0: cpp_mux: aa55f00f52ad51(80)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport_pc: Via 686A parallel port: io=0x378
imm: Version 2.05 (for Linux 2.4.0)
ppa: Version 2.07 (for Linux 2.4.x)
inserting floppy driver for 2.6.3-15mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:02:08.0-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KLE133 chipset
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: AGP aperture is 64M @ 0xd0000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
/cdrom/live_tree_i18n_fr.clp: 1474 blocks, 65536 bytes/block, largest block is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
/cdrom/live_tree_always_i18n_fr.clp: 35 blocks, 65536 bytes/block, largest block is 26964 bytes.
ISO 9660 Extensions: RRIP_1991A
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
eth0: RealTek RTL8139 at 0xe02d7000, 00:10:dc:1a:88:4c, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100'
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_mux: aa55f00f52ad51(80)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport0: cpp_mux: aa55f00f52ad51(80)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
PCI: Found IRQ 12 for device 0000:00:07.5
PCI: Setting latency timer of device 0000:00:07.5 to 64
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.0.
NTFS volume version 3.0.
NTFS volume version 3.0.
NTFS volume version 3.0.
Real Time Clock Driver v1.12
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1, type 0
Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2, type 0
Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3, type 0
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
end_request: I/O error, dev fd0, sector 0
usb 4-2: USB disconnect, address 3
usb 4-2: new full speed USB device using address 4
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: USB Storage-SMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
Vendor: Generic Model: USB Storage-CFC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 1, type 0
Vendor: Generic Model: USB Storage-MMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 2, type 0
Vendor: Generic Model: USB Storage-MSC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 3, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03605a0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
usb 4-2: USB disconnect, address 4
usb 4-2: new full speed USB device using address 5
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: USB Storage-SMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Vendor: Generic Model: USB Storage-CFC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0
Vendor: Generic Model: USB Storage-MMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0
Vendor: Generic Model: USB Storage-MSC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
usb 4-2: USB disconnect, address 5
usb 4-2: new full speed USB device using address 6
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: USB Storage-SMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0
Vendor: Generic Model: USB Storage-CFC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 1
Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 1, type 0
Vendor: Generic Model: USB Storage-MMC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 2
Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 2, type 0
Vendor: Generic Model: USB Storage-MSC Rev: 0207
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi3, channel 0, id 0, lun 3
Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 3, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 6