;--- PROTOCOL TYPE (Parameter type 13H)
;--- Defines the network interface protocol.
;--- Possible values for the data are as follows:
;--- 00H = Standard CAS.
;--- 01H = PRI ISDN
;--- 02H = No signaling.
;--- The default data value is 00H.
0013 01
;---
;--- FRAMING FORMAT (Parameter type 14H)
;--- Defines the T1 framing format.
;--- Possible values for the data are as follows:
;--- 00H = D4 framing.
;--- 01H = ESF framing. ESF is supported only in SCbus mode, PEB mode
;--- in signalling insertion or when the protocol type (Parameter
;--- type 13H) is PRI ISDN.
;--- The default data value is 00H.
0014 01
;---
;--- ENABLE/DISABLE the D channel (Parameter type 16H)
;--- Value 02 is used only when the protocol type (Parameter number 13H) is
;--- PRI ISDN AND THE D CHANNEL IS NOT ON BOARD IN NFAS CONFIGURATION.
;--- Possible values for the data are as follows:
;--- 00H = Undefined.
;--- 01H = Enable the D CHANNEL
;--- 02H = Disable the D channel. Used only when the board is used as non-
;--- D channel board in T1 NFAS enviroment.
0016 01
;---
;--- ZERO CODE SUPPRESSION MODE (Parameter type 20H)
;--- Sets the Zero Code Suppression mode for T1
;--- Possible values for the data are as follows:
;--- 00H = No zero code suppression
;--- 01H = B8ZS
;--- 02H = Bit 7 jamming
;--- The default data value is 00H (no zero code suppression)
0020 01
;---
;--- Inverted D channel (Parameter type 23H)
;--- This feature is not applicable for DASS2 protocol
;--- 00H = Not inverted
;--- 01H = D channel is inverted
;--- The default value is 00H
;--- Must be set to 01H for D channel inversion
;0023 01