rendered paste bodydmesg with only one card in the box
--
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:02:0c.0 failed with error -5
dmesg with both cards in the box (wich is how I had it when I compiled and installed zaptel drivers)
--
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X100P
Registered tone zone 0 (United States / North America)
/etc/zaptel.conf
--
fxsks=1
defaultzone=us
loadzone=us
/sbin/ztcfg -vvvv with one card
--
Zaptel Version: SVN-trunk-r1659
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
/sbin/ztcfg -vvvv with both cards
--
Zaptel Version: SVN-trunk-r1659
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
cat /proc/interrupts after modprobe ztdummy, zaptel, and wcfxo with one card
--
CPU0
0: 747462 IO-APIC-edge timer
1: 423 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 3049043 IO-APIC-edge rtc
9: 1 IO-APIC-level acpi
12: 20349 IO-APIC-edge i8042
14: 7863 IO-APIC-edge ide0
15: 26661 IO-APIC-edge ide1
169: 3469 IO-APIC-level eth0
177: 0 IO-APIC-level uhci_hcd:usb3
185: 174628 IO-APIC-level uhci_hcd:usb1, r128@pci:0000:01:00.0
193: 0 IO-APIC-level uhci_hcd:usb2
201: 0 IO-APIC-level ehci_hcd:usb4
209: 0 IO-APIC-level Intel 82801DB-ICH4
NMI: 0
LOC: 747438
ERR: 0
MIS: 0