rendered paste bodyClock input is 27 MHz
Booting from [NOR flash]
Ethernet eth0: MAC address 00:04:9f:00:5c:f3
IP: 128.178.145.106/255.255.255.0, Gateway: 128.178.145.1
Default server: 128.178.145.53
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version FSL 200617 - built 10:14:40, Apr 24 2006
Platform: MX31 ADS (Freescale i.MX31 based) PASS 1.1 [x32 DDR]
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x07f00000, [0x00013ec0-0x07ed1000] available
FLASH: 0xa0000000 - 0xa2000000, 256 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load kernel
... Read from 0x07ee0000-0x07eff000 at 0xa1fe0000: .
... Read from 0x00100000-0x00300000 at 0xa0100000: ................
** Warning - checksum failure. stored: 0xbb137e61, computed: 0x577e2064
RedBoot> exec -b 0x00100000 -l 0x00200000 -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rootfstype=jffs2 ip=off"
Warning: invalid entry address but still continue ...
Uncompressing Linux...................................................................................................... done, booting the kernel.
Linux version 2.6.16.19-mx31 (valentin@lsa1pc7) (gcc version 4.1.1) #1 PREEMPT Thu Nov 23 08:47:42 CET 2006
CPU: Some Random V6 Processor [4107b364] revision 4 (ARMv6TEJ)
Machine: Freescale MX31ADS
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists
Kernel command line: noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rootfstype=jffs2 ip=off
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 104MB = 104MB total
Memory: 102144KB available (2592K code, 604K data, 116K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
MXC GPIO hardware
system_rev is: 0x11
MX31ADS EXPIO(CPLD) hardware
Clock input source is 27MHz
L2 cache: WB
usb: USBH1 registered
usb: USBH2 registered
usb: OTG Gadget registered
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
MXC I2C driver
g_ipu_clk = 133200000
CSPI driver
SPI1 loaded
SPI2 loaded
SPI3 loaded
[INFO: Rev-id: 0x0000009b]
mc13783 Version: 3.3
mc13783 Final version: 0 found
mc13783 core loaded. Current version is 33
mc13783 rtc loaded
mc13783 light successfully loaded
mc13783 power loaded
Low-Level PM Driver module loaded
Freescale i.MX31 Dynamic Power Management.
Using SDMA I.API
MXC DMA API initialized
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 30x40
Real Time Clock Driver v1.0
MXC WatchDog Driver 2.0
MXC Watchdog # 0 Timer: initial timeout 60 sec
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC
mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
mxcintuart.4: ttymxc4 at MMIO 0x43fb4000 (irq = 47) is a Freescale MXC
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
cs89x0:cs89x0_probe(0x0)
cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>
eth0: cs8900 rev K found at 0xeb020300 [Cirrus EEPROM]
cs89x0 media RJ-45, IRQ 168, programmed I/O, MAC 00:c0:9f:35:bf:d8
cs89x0_probe1() successful
cs89x0:cs89x0_probe(0x0)
cs89x0: request_region(0xeb020303, 0x10) failed
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Linux video capture interface: v1.00
mxc_v4l2out: registered device video16
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
MXC MTD nor Driver 2.0
mxc_nor_flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
mxc_nor_flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Searching for RedBoot partition table in mxc_nor_flash.0 at offset 0x1fe0000
5 RedBoot partitions found on MTD device mxc_nor_flash.0
Creating 5 MTD partitions on "mxc_nor_flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00100000-0x00300000 : "kernel"
0x00300000-0x018c0000 : "root"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
MXC MTD nand Driver 2.0
No NAND device found!!!
usbmon: debugfs is not available
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: mxckpd as /class/input/input0
Driver for 1-wire Dallas network protocol.
Serial: MXC OWire driver
IPU Post-filter loading
SSI module loaded successfully
dam : creating devfs entry for DAM
mc13783 adc loaded
mc13783 audio loaded
mc13783 battery loaded
mc13783 connectivity successfully loaded
DVFS & DPTC: using 27MHz CKIH table
DPTC controller initialized
DVFS controller initialized
DVFS frequency #0: 532000000
DVFS frequency #1: 266000000
DVFS frequency #2: 133000000
DVFS frequency #3: 133000000
hmp4e: module inserted, encoder HW at 0x53fc8000
SEC: mxc_sec_mod_init() called
MXC MMC/SD driver
mxcmci-0 found
mxcmci-1 found
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
Configuring st headset
INFO: mxc_mc13783_probe Registered ALSA PCM Component
INFO: mxc_mc13783_probe Registered ALSA Control Component
ALSA device list:
#0: MXC Freescale with mc13783
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Power Management for Freescale MX31
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 116K