rendered paste body# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Nov 1 19:47:17 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg
Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "Screen[0]" 0 0
Screen 1 "Screen[1]" LeftOf "Screen[0]"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Generic Keyboard" "CoreKeyboard"
EndSection
Section "Files"
# paths to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
#Load "dri"
#Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
#CRT
Identifier "Monitor[0]"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
Gamma 1.2
Option "DPMS"
EndSection
Section "Monitor"
#TV
Identifier "TV"
HorizSync 60.0 - 60.0
VertRefresh 30.0 - 150.0
EndSection
Section "Device"
#Driver "nv"
Identifier "Device[0]"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 0
Option "TripleBuffer" "true"
EndSection
Section "Device"
#adjust using 'lspci' or cat /proc/pci
Identifier "Device[1]"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 1
Option "TripleBuffer" "true"
EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
Option "HWcursor" "true"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
# Enable 32-bit ARGB GLX Visuals
Option "AddARGBGLXVisuals" "True"
# If you are using an older version of compiz that
# does not support rendering into the Composite
# Overlay Window, you will need to disable clipping
# of GLX rendering to the X Root window with this
# option, or you will get a blank screen after
# starting compiz:
# Option "DisableGLXRootClipping" "True"
EndSection
Section "Screen"
Identifier "Screen[1]"
Device "Device[1]"
Monitor "TV"
DefaultDepth 24
Option "TVOutFormat" "Composite" #or S-VIDEO etc
Option "TVStandard" "PAL-G" #or NTSC etc
Option "ConnectedMonitor" "TV"
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
# Enable 32-bit ARGB GLX Visuals
Option "AddARGBGLXVisuals" "True"
# If you are using an older version of compiz that
# does not support rendering into the Composite
# Overlay Window, you will need to disable clipping
# of GLX rendering to the X Root window with this
# option, or you will get a blank screen after
# starting compiz:
# Option "DisableGLXRootClipping" "True"
EndSection