Anonymous

public text v1 · immutable
#250333
·published 2006-11-16 21:39 UTC
vm config:

#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'.
# You use a separate script for each domain you want to create, or 
# you can set the parameters for the domain on the xm command line.
#============================================================================

#----------------------------------------------------------------------------
kernel = "/boot/vmlinuz-2.6.18-1.2239.fc5xenU"
ramdisk = "/boot/initrd-2.6.18-1.2239.fc5xenU.img"
memory = "256"
name = "nkmax001"
vif = [ '' ]
disk = [ 'phy:/dev/vg0/vm001,/dev/sda1,w' ]
root = "/dev/sda1 ro"

# Sets runlevel 3.
extra = "3"





boot log:

[root@nkmax xen]# xm create -c vm001
Using config file "vm001".
Started domain nkmax001
Linux version 2.6.18-1.2239.fc5xenU (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1
-1)) #1 SMP Fri Nov 10 14:15:41 EST 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Built 1 zonelists.  Total pages: 67584
Kernel command line:  root=/dev/sda1 ro 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c06dd000 soft=c06bd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1836.113 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-fb3fe000, maxmem 33ffe000
Memory: 251836k/270336k available (1719k kernel code, 9980k reserved, 633k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4594.36 BogoMIPS (lpj=9188721)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3438k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163713001.338:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 481F17AAEB289250
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-1.2239.fc5xenU (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1
-1)) #1 SMP Fri Nov 10 14:15:41 EST 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Built 1 zonelists.  Total pages: 67584
Kernel command line:  root=/dev/sda1 ro 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c06dd000 soft=c06bd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1836.113 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-fb3fe000, maxmem 33ffe000
Memory: 251836k/270336k available (1719k kernel code, 9980k reserved, 633k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4594.36 BogoMIPS (lpj=9188721)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3438k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163713001.338:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 481F17AAEB289250
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080ef6fe
4gb seg fixup, process modprobe (pid 151), cs:ip 73:0811390e
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2629
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2637
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2629
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2637
4gb seg fixup, process modprobe (pid 151), cs:ip 73:0811cba2
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080a43d1
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2629
4gb seg fixup, process modprobe (pid 151), cs:ip 73:080f2637
Registering block device major 8
ide-floppy driver 0.99.newide
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 144k freed
Write protecting the kernel read-only data: 258k
Red Hat nash version 5.0.32 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading dm-mod.ko module
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Making device-mapper control node
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  No volume groups found
Activating logical volumes
  Unable to find volume group "vg0"
Creating root device.
Mounting root filesystem.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys