[root@localhost leo]# dmesg
Linux version 2.6.12-std26-up-alt7 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Mon Dec 5 15:45:18 MSK 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001def3000 (ACPI NVS)
BIOS-e820: 000000001def3000 - 000000001df00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
found SMP MP-table at 000f41b0
On node 0 totalpages: 122608
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118512 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 RS480 ) @ 0x000f8020
ACPI: RSDT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1def3040
ACPI: FADT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1def30c0
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x1def76c0
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x1def7800
ACPI: MCFG (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1def7900
ACPI: MADT (v001 RS480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1def7600
ACPI: DSDT (v001 RS480 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 1df00000 (gap: 1df00000:c2100000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-up ro root=301 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2201.204 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 482500k/490432k available (1496k kernel code, 7368k reserved, 738k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4341.76 BogoMIPS (lpj=2170880)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 426k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfab00, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI-0352: *** Error: Looking up [\_SB_.PCI0.LPC0.LNK0] in namespace, AE_NOT_FOUND
search_node c1435560 start_node c1435560 return_node 00000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: ioport range 0x140-0x15f has been reserved
pnp: 00:00: ioport range 0x228-0x22f has been reserved
pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:00: ioport range 0xc00-0xc01 has been reserved
pnp: 00:00: ioport range 0xc14-0xc14 has been reserved
pnp: 00:00: ioport range 0xc50-0xc52 has been reserved
pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved
pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved
audit: initializing netlink socket (disabled)
audit(1163755750.393:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xf8000000, mapped to 0xde880000, using 6144k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:52fa
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
Console: switching to colour frame buffer device 128x45
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AUDO MODM PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PCE8 P2P UAR1 PS2M PS2K
ACPI: (supports S0 S3 S4 S4bios S5)
input: AT Translated Set 2 keyboard on isa0060/serio0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 > hda3
SCSI subsystem initialized
libata version 1.11 loaded.
sata_sil version 0.9
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 23
ata1: SATA max UDMA/100 cmd 0xDE810080 ctl 0xDE81008A bmdma 0xDE810000 irq 23
ata2: SATA max UDMA/100 cmd 0xDE8100C0 ctl 0xDE8100CA bmdma 0xDE810008 irq 23
ata1: no device found (phy stat 00000000)
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ata3: SATA max UDMA/100 cmd 0xDE84E080 ctl 0xDE84E08A bmdma 0xDE84E000 irq 22
ata4: SATA max UDMA/100 cmd 0xDE84E0C0 ctl 0xDE84E0CA bmdma 0xDE84E008 irq 22
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f
ata3: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata3: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata4: no device found (phy stat 00000000)
scsi3 : sata_sil
Vendor: ATA Model: ST3250824AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda: sda1
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 184k freed
Executing init=/sbin/init
Real Time Clock Driver v1.12
Adding 835372k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
subfs 0.9
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
input.c: calling hotplug without a hotplug agent defined
input: PC Speaker
FDC 0 is a post-1991 82077
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
input.c: calling hotplug without a hotplug agent defined
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.101 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
eth0: RealTek RTL8139 at 0xdf10c000, 00:16:ec:1a:ca:18, IRQ 22
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link down
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 23 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048]
hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff46a939]
lp0: using parport0 (interrupt-driven).
lp0: console ready
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 2-4: new full speed USB device using ohci_hcd and address 2
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
APIC error on CPU0: 00(40)
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
mtrr: no MTRR for f8000000,1000000 found
mtrr: no MTRR for f9000000,800000 found
mtrr: no MTRR for f9800000,400000 found
mtrr: no MTRR for f9c00000,200000 found
mtrr: no MTRR for f9e00000,100000 found
mtrr: no MTRR for f9f00000,80000 found
mtrr: no MTRR for f9f80000,40000 found
mtrr: no MTRR for f9fc0000,20000 found
mtrr: no MTRR for f9fe0000,10000 found
APIC error on CPU0: 40(40)
mtrr: no MTRR for f8000000,1000000 found
mtrr: no MTRR for f9000000,800000 found
mtrr: no MTRR for f9800000,400000 found
mtrr: no MTRR for f9c00000,200000 found
mtrr: no MTRR for f9e00000,100000 found
mtrr: no MTRR for f9f00000,80000 found
mtrr: no MTRR for f9f80000,40000 found
mtrr: no MTRR for f9fc0000,20000 found
mtrr: no MTRR for f9fe0000,10000 found
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
APIC error on CPU0: 40(40)
VFS: busy inodes on changed media.
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 402 MBytes.
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
mtrr: no MTRR for f8000000,1000000 found
mtrr: no MTRR for f9000000,800000 found
mtrr: no MTRR for f9800000,400000 found
mtrr: no MTRR for f9c00000,200000 found
mtrr: no MTRR for f9e00000,100000 found
mtrr: no MTRR for f9f00000,80000 found
mtrr: no MTRR for f9f80000,40000 found
mtrr: no MTRR for f9fc0000,20000 found
mtrr: no MTRR for f9fe0000,10000 found
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 57 to 3
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 4
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 58 to 5
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 6
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
APIC error on CPU0: 40(40)
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7
set_rtc_mmss: can't update from 59 to 7