rendered paste body
MyLoader version 2.31.0310
System memory: 16MB ram, 4MB flash
Probe Flash Device: 00400000 at bfc00000
Flash Device: Found 1 x16 devices at 0x0 in 16-bit mode
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Load Firmware
Loading Firmware ..............................................................................................................................
CPU revision is: 0001800b
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.28 (ttyaw@linux01) (gcc version 3.3.5) #1 Wed Mar 8 16:18:41 SGT 2006
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Initial ramdisk at: 0x80223000 (2310144 bytes)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200
CPU clock: 175MHz
Using 87.500 MHz high precision timer.
Calibrating delay loop... 174.48 BogoMIPS
Memory: 11756k/16384k available (1712k kernel code, 4628k reserved, 108k data, 92k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
Autoconfig PCI channel 0x801eb0a8
Scanning bus 00, I/O 0x11500000:0x115ffff0, Mem 0x11400000:0x11500000
00:00.0 Class 0600: 1317:5120
00:02.0 Class 0200: 168c:001b (rev 01)
Mem at 0x11400000 [size=0x10000]
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
ADMtek ADM5120 Serial driver version 1.0 (2004-10-28)
ttyS00 at 0x12600000 (irq = 1) is a ADM5120 Serial
ttyS01 at 0x12800000 (irq = 2) is a ADM5120 Serial
ledman: Copyright (C) SnapGear, 2000-2002.
Button Driver Version 0.2 (2003-10-22) Luo Yi Ming
Hardware Watchdog Timer for ADM5120: 0.0.1, hualab
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
ADMtek ADM5120 10/100 Ethernet driver v0.3.0 (Mar 16, 2004)
eth0: at 0x12000000, 00:80:48:3e:c4:90, IRQ 9
physmap flash device: 400000 at 1fc00000
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Found mylo partition table.
Creating 3 MTD partitions on "Physically mapped flash":
0x00030000-0x003f0000 : "partition0"
0x003f0000-0x00400000 : "partition1"
0x00020000-0x00030000 : "partition2"
ath_pci: 0.9.4.12 (Atheros/multi-bss)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.4 phy 6.1 radio 6.3
ath0: 802.11 address: 00:80:48:41:34:72
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 9 for beacons
ath0: hardware supported ciphers: WEP TKIP (MIC) AES AES-CCM
ath0: Atheros 5212: mem=0x11400000, irq=6
ath_hal: 0.9.16.1 (AR5212, RF5112, RF2413, RF5413)
ath_rate_sample: 1.2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
wlan: 0.8.4.2 (EXPERIMENTAL)
wlan: ap scanner scanner registered
wlan: client bridge registered
wlan: 0.8.4.2 (EXPERIMENTAL)
wlan: ap scanner scanner registered
wlan: client bridge registered
wlan: mac acl policy registered
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2256 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 2256k freed
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 92k freed
Algorithmics/MIPS FPU Emulator v1.5
Mounting proc filesystem:
Mounting local filesystems:
Start watchdog:
Started watchdog timer.
Start localtime:
Start netif:
Start network:
Start vlan:
dev.ath.countrycode = 0
dev.ath.outdoor = 0
dev.ath0.txantenna = 1
dev.ath0.diversity = 0
dev.ath0.rxantenna = 1
dev.ath0.antswitch = 1
Start wlan:
ath0 No scan results
Start bridge:
vlan3: dev_set_promiscuity(master, 1)
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device vlan3 entered promiscuous mode
device ath0 entered promiscuous mode
Start stp:
Start loop:
Start lan:
br0: port 2(ath0) entering learning state
br0: port 1(vlan3) entering learning state
br0: port 2(ath0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan3) entering forwarding state
br0: topology change detected, propagating
Start apencrypt:
Start snmpd:
Start uconfig:
Start ntpdate:
Start button:
ntpdate: time.nist.gov - unknown host.
Start webs:
Start monitorps: