rendered paste bodyInspecting /boot/System.map-2.6.16.21-0.25-default
Loaded 21308 symbols from /boot/System.map-2.6.16.21-0.25-default.
Symbols match kernel version 2.6.16.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Sep 19 07:26:15 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
<4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
<4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>No mptable found.
<7>On node 0 totalpages: 262128
<7> DMA zone: 4096 pages, LIFO batch:0
<7> DMA32 zone: 0 pages, LIFO batch:0
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 32752 pages, LIFO batch:7
<6>DMI 2.2 present.
<6>IO/L-APIC allowed because system is MP or new enough
<7>ACPI: RSDP (v000 XPC ) @ 0x000f6d80
<7>ACPI: RSDT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
<7>ACPI: FADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
<7>ACPI: MADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7200
<7>ACPI: DSDT (v001 XPC SN45 0x00001000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x4008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 6:10 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<4>ACPI: BIOS IRQ0 pin2 override ignored.
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda1 vga=771 resume=/dev/hda5 splash=silent
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 2170.685 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1033796k/1048512k available (1490k kernel code, 13980k reserved, 608k data, 156k init, 131008k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 4347.00 BogoMIPS (lpj=8694011)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Athlon(tm) XP 3200+ stepping 00
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 2286k freed
<4> not found!
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb790, last bus=3
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20060127
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:03:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
<4>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
<4>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
<4>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
<4>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
<4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
<4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 14 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<4>Setting up standard PCI resources
<6>pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
<6>pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
<6>pnp: 00:00: ioport range 0x4400-0x447f has been reserved
<6>pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
<6>pnp: 00:00: ioport range 0x4200-0x427f has been reserved
<6>pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
<6>pnp: 00:01: ioport range 0x5000-0x503f has been reserved
<6>pnp: 00:01: ioport range 0x5100-0x513f has been reserved
<6>PCI: Bridge: 0000:00:08.0
<6> IO window: disabled.
<6> MEM window: eb000000-ebffffff
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: disabled.
<6> MEM window: e9000000-eaffffff
<6> PREFETCH window: d0000000-dfffffff
<7>PCI: Setting latency timer of device 0000:00:08.0 to 64
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1162731418.672:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1875k, total 262144k
<6>vesafb: mode is 800x600x8, linelength=800, pages=6
<6>vesafb: protected mode interface info at c000:e100
<6>vesafb: scrolling: redraw
<6>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
<4>Console: switching to colour frame buffer device 100x37
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
<4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 156k freed
<4>logips2pp: Detected unknown logitech mouse model 62
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>NFORCE2: IDE controller at PCI slot 0000:00:09.0
<6>NFORCE2: chipset revision 162
<6>NFORCE2: not 100% native mode: will probe irqs later
<4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
<4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
<6>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: Maxtor 6Y160L0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 512KiB
<6>hda: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 < hda5 hda6 >
<7>Probing IDE interface ide1...
<4>hdc: WDC WD1200JB-22GVA0, ATA DISK drive
<6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
<4>hdd: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdc: max request size: 512KiB
<6>hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hdc: cache flushes supported
<6> hdc: hdc1 hdc2
<6>ACPI: Thermal Zone [THRM] (45 C)
<6>ACPI: Fan [FAN] (on)
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Adding 1124508k swap on /dev/hda5. Priority:-1 extents:1 across:1124508k
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
<6>lp0: using parport0 (interrupt-driven).
<6>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<7>ieee1394: Initialized config rom entry `ip1394'
<4>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 177
<7>PCI: Setting latency timer of device 0000:00:06.0 to 64
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<4>dvb_core: module not supported by Novell, setting U taint flag.
<4>stv0299: module not supported by Novell, setting U taint flag.
<4>tda1004x: module not supported by Novell, setting U taint flag.
<4>tda10021: module not supported by Novell, setting U taint flag.
<4>ttpci_eeprom: module not supported by Novell, setting U taint flag.
<4>saa7146: module not supported by Novell, setting U taint flag.
<4>nvidia: module not supported by Novell, setting U taint flag.
<4>nvidia: module license 'NVIDIA' taints kernel.
<4>budget_core: module not supported by Novell, setting U taint flag.
<4>tua6100: module not supported by Novell, setting U taint flag.
<6>intel8x0_measure_ac97_clock: measured 52964 usecs
<6>intel8x0: clocking to 48000
<4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 185
<7>PCI: Setting latency timer of device 0000:00:02.2 to 64
<6>ehci_hcd 0000:00:02.2: EHCI Host Controller
<6>ehci_hcd 0000:00:02.2: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.2
<6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:02.2: irq 185, io mem 0xec083000
<6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.2
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<4>v4l2_common: module not supported by Novell, setting U taint flag.
<4>v4l1_compat: module not supported by Novell, setting U taint flag.
<4>videodev: module not supported by Novell, setting U taint flag.
<6>Linux video capture interface: v2.00
<4>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 193
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[ec084000-ec0847ff] Max Packet=[2048] IR/IT contexts=[4/4]
<4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<4>video_buf: module not supported by Novell, setting U taint flag.
<4>saa7146_vv: module not supported by Novell, setting U taint flag.
<4>dvb_pll: module not supported by Novell, setting U taint flag.
<4>budget_av: module not supported by Novell, setting U taint flag.
<4>saa7146: register extension 'budget_av'.
<6>eth0: forcedeth.c: subsystem: 01297:f541 bound to 0000:00:04.0
<4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 185
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:02.0: irq 185, io mem 0xec087000
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:02.0
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 3 ports detected
<4>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 193
<7>PCI: Setting latency timer of device 0000:00:02.1 to 64
<6>ohci_hcd 0000:00:02.1: OHCI Host Controller
<6>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
<6>ohci_hcd 0000:00:02.1: irq 193, io mem 0xec082000
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: OHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
<6>usb usb3: SerialNumber: 0000:00:02.1
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 3 ports detected
<6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
<6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
<6>agpgart: Detected NVIDIA nForce2 chipset
<6>agpgart: AGP aperture is 128M @ 0xe0000000
<4>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 201
<4>NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
<3>ohci1394: fw-host0: SelfID received outside of bus reset sequence
<6>usb 2-1: new full speed USB device using ohci_hcd and address 2
<4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 209
<4>saa7146: found saa7146 @ mem f8be2000 (revision 1, irq 209) (0x153b,0x1156).
<4>saa7146 (0): dma buffer size 192512
<4>DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
<4>adapter failed MAC signature check
<4>encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>usb 2-1: new device found, idVendor=03f0, idProduct=3004
<6>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 2-1: Product: DeskJet 980C
<6>usb 2-1: Manufacturer: Hewlett-Packard
<6>usb 2-1: SerialNumber: MY12M1108COF
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3004
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301b301bb18240]
<6>usbcore: registered new driver usblp
<6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<6>KNC1-0: MAC addr = 00:0a:ac:01:dd:8d
<4>DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
<6>budget-av: ci interface initialised.
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
<7>dm-netlink version 0.0.2 loaded
<6>loop: loaded (max 8 devices)
<5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda6: checking transaction log (hda6)
<5>ReiserFS: hda6: Using r5 hash to sort names
<5>ReiserFS: hdc2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdc2: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdc2: checking transaction log (hdc2)
<5>ReiserFS: hdc2: Using r5 hash to sort names
<6>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
<5>audit(1162731462.010:2): AppArmor (version 2.0-19.43r6320) initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Nov 5 13:57:01 2006
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneActivating swap-devices in /etc/fstab...
donedone
Starting udevd done
Loading required kernel modules
doneActivating device mapper...
done
Starting MD Raid done
Checking file systems...
fsck 1.38 (30-Jun-2005)
Reiserfs super block in block 16 on 0x306 of format 3.6 with standard journal
Blocks (total/free): 38204560/4652642 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hda6' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x1602 of format 3.6 with standard journal
Blocks (total/free): 25370640/22174128 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdc2' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda6 on /home type reiserfs (rw,acl,user_xattr)
/dev/hdc2 on /local type reiserfs (rw,acl,user_xattr)
/dev/hdc1 on /mnt/Windows type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-15)
doneSetting up the hardware clockdone
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Setting up hostname 'linux-etxea'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>killproc: kill(822,29)
Creating /var/log/boot.msg
doneStarting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(822,3)
INIT:
Boot logging started on /dev/tty1(/dev/console) at Sun Nov 5 13:57:47 2006
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Entering runlevel: 5
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
Loading AppArmor profiles - AppArmor already loaded with profiles. Not loading profiles. warning
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/acpid ]
[acpid]: starting up
[acpid]: 0 rules loaded
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting D-BUS daemondone
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Creating DVB devices in /dev/dvb/adapter0
Creating DVB devices in /dev/dvb/adapter1
Creating DVB devices in /dev/dvb/adapter2
Creating DVB devices in /dev/dvb/adapter3
Starting irqbalance unused
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
Loading keymap i386/qwerty/es.map.gz
doneLoading compose table latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:iso8859-1
doneStarting the DHCP DBUS Daemondone
Starting the NetworkManagerDispatcherdone
Starting the NetworkManagerdone
If service network should wait until connection is established
then set /etc/sysconfig/network/config:NM_ONLINE_TIMEOUT
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Checking/updating CPU microcode unused
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Note: You may have to restart the cupsd.
Starting ZENworks Management Daemondone
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting mail service (Postfix)<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=es_ES@euro PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Starting service MySQL done
Starting service kdmdone
Starting cupsddone
Starting SSH daemondone
Starting service kdmdone
Starting powersaved: done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=771 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
SuSEfirewall2: Warning: no interface active
<notice>checkproc: /opt/kde3/bin/kdm 3040
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: irq_balancer nfs microcode splash
<notice>killproc: kill(2257,3)