rendered paste bodydmesg
Bootdata ok (command line is root=/dev/hda6 ro console=tty0 noapic)
Linux version 2.6.8-12-em64t-p4-smp (buildd@bester) (gcc version 3.4.4 20050314(prerelease) (Debian 3.4.3-13sarge1)) #1 SMP Tue Sep 19 01:32:16 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
BIOS-e820: 000000001bea0000 - 000000001bead000 (ACPI data)
BIOS-e820: 000000001bead000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
No mptable found.
On node 0 totalpages: 114336
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110240 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6d00
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001bea7350
ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x000000001beace20
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001beace94
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000001beacf6a
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000001beacfc4
ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: <6>Product ID: <6>APIC at: 0xFEE00000
I/O APIC #1 Version 33 at 0xFEC00000.
Processors: 1
Built 1 zonelists
Kernel command line: root=/dev/hda6 ro console=tty0 noapic
Initializing CPU#0
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1800.130 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 442120k/457344k available (1609k kernel code, 14460k reserved, 912k data, 152k init)
Calibrating delay loop... 3538.94 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
per-CPU timeslice cutoff: 1023.52 usecs.
task migration cache decay timeout: 2 msecs.
Only one processor found.
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
time.c: Using PIT/TSC based timekeeping.
Brought up 1 CPUs
CPU0: online
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Embedded Controller [EC0] (gpe 3)
ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 000001001b7b0cc0), AE_TIME
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 000001001b7b0cc0), AE_TIME
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:14.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI interrupt 0000:06:05.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:06:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 11 (level, low) -> IRQ 11
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: ST98823A, ATA DISK drive
hdc: Slimtype DVDRW SSW-8015S, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 > p2
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
Adding 514040k swap on /dev/hda5. Priority:-1 extents:1
Real Time Clock Driver v1.12
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:06:06.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01001002, devctl 0x44
Yenta: ISA IRQ mask 0x0008, PCI irq 11
Socket status: 30000006
r8169 Gigabit Ethernet driver 1.2 loaded
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Identified chip type is 'RTL8169'.
eth0: RTL8169 at 0xffffff00101b2000, 00:16:d3:43:33:1f, IRQ 11
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: irq 11, pci mem ffffff00101b4000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: irq 11, pci mem ffffff00101b6000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-2: new full speed USB device using address 3
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: irq 11, pci mem ffffff00101b8000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
usb 1-2: USB disconnect, address 3
usb 1-1: new low speed USB device using address 4
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1
usb 1-2: new full speed USB device using address 5
ath_hal: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
wlan: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_rate_amrr: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_pci: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff8033f1c0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
spurious 8259A interrupt: IRQ7.
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ath_hal: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
wlan: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_rate_amrr: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_pci: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
hackass:~# dmesg
Bootdata ok (command line is root=/dev/hda6 ro console=tty0 noapic)
Linux version 2.6.8-12-em64t-p4-smp (buildd@bester) (gcc version 3.4.4 20050314(prerelease) (Debian 3.4.3-13sarge1)) #1 SMP Tue Sep 19 01:32:16 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
BIOS-e820: 000000001bea0000 - 000000001bead000 (ACPI data)
BIOS-e820: 000000001bead000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
No mptable found.
On node 0 totalpages: 114336
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110240 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6d00
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001bea7350
ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x000000001beace20
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001beace94
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000001beacf6a
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000001beacfc4
ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: <6>Product ID: <6>APIC at: 0xFEE00000
I/O APIC #1 Version 33 at 0xFEC00000.
Processors: 1
Built 1 zonelists
Kernel command line: root=/dev/hda6 ro console=tty0 noapic
Initializing CPU#0
PID hash table entries: 16 (order 4: 256 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1800.130 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 442120k/457344k available (1609k kernel code, 14460k reserved, 912k data, 152k init)
Calibrating delay loop... 3538.94 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU0: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
per-CPU timeslice cutoff: 1023.52 usecs.
task migration cache decay timeout: 2 msecs.
Only one processor found.
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
time.c: Using PIT/TSC based timekeeping.
Brought up 1 CPUs
CPU0: online
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Embedded Controller [EC0] (gpe 3)
ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 000001001b7b0cc0), AE_TIME
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 000001001b7b0cc0), AE_TIME
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:14.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI interrupt 0000:06:05.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:06:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 11 (level, low) -> IRQ 11
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: ST98823A, ATA DISK drive
hdc: Slimtype DVDRW SSW-8015S, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 > p2
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
Adding 514040k swap on /dev/hda5. Priority:-1 extents:1
Real Time Clock Driver v1.12
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:06:06.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01001002, devctl 0x44
Yenta: ISA IRQ mask 0x0008, PCI irq 11
Socket status: 30000006
r8169 Gigabit Ethernet driver 1.2 loaded
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Identified chip type is 'RTL8169'.
eth0: RTL8169 at 0xffffff00101b2000, 00:16:d3:43:33:1f, IRQ 11
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: irq 11, pci mem ffffff00101b4000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: irq 11, pci mem ffffff00101b6000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-2: new full speed USB device using address 3
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: irq 11, pci mem ffffff00101b8000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
usb 1-2: USB disconnect, address 3
usb 1-1: new low speed USB device using address 4
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1
usb 1-2: new full speed USB device using address 5
ath_hal: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
wlan: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_rate_amrr: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_pci: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff8033f1c0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
spurious 8259A interrupt: IRQ7.
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ath_hal: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
wlan: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_rate_amrr: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
ath_pci: version magic '2.6.8-12-em64t-p4-smp SMP gcc-3.3' should be '2.6.8-12-em64t-p4-smp SMP gcc-3.4'
atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known