rendered paste bodyCFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Jun 25 15:49:22 CST 2004 (root@Amin)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 0x2000000 bytes (32MB)
Total memory used by CFE: 0x80300000 - 0x8043DF30 (1302320)
Initialized Data: 0x803381A0 - 0x8033A550 (9136)
BSS Area: 0x8033A550 - 0x8033BF30 (6624)
Local Heap: 0x8033BF30 - 0x8043BF30 (1048576)
Stack Area: 0x8043BF30 - 0x8043DF30 (8192)
Text (code) segment: 0x80300000 - 0x803381A0 (229792)
Boot area (physical): 0x0043E000 - 0x0047E000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.2
The boot is CFE
mac_init(): Find mac [00:0F:66:C7:7C:C4] in location 1
Nothing...
No eou key find
Device eth0: hwaddr 00-0F-66-C7-7C-C4, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ...... 1650688 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@mighty) (gcc version 3.3.3) #1 Sat Aug 14 14:44:52 CEST 2004
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 30380k/32768k available (1422k kernel code, 2388k reserved, 100k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Disabled
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
Software Watchdog Timer: 0.05, timer margin: 60 sec
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 919
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x007e0000 : "linux"
0x000e5f80-0x001ba12d : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007e0000-0x00800000 : "nvram"
0x001c0000-0x007e0000 : "OpenWrt"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k freed
Algorithmics/MIPS FPU Emulator v1.5
Using /lib/modules/2.4.20/diag.o
diag board_type: 00000101
using v2 hardware
led -> 00
led -> 01
Unlocking mtd4
umount: /rom/dev: Device or resource busy
init started: BusyBox v1.00-rc2 (2004.08.14-12:53+0000) multi-call binary
kernel.panic = 3
net.ipv4.ip_forward = 1
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 120
net.ipv4.tcp_timestamps = 0
jffs2.bbc: SIZE compression mode activated.
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
eth1: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004)
device eth0 entered promiscuous mode
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Using /lib/modules/2.4.20/adm.o
ADM: 00071010
OpenWRT ADM Config:
port0 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO
DOWN 10Mbps HD FLOW
PRIO:0 PVID:0 vlan0
RX packets:0
TX packets:0
collisions:0 errors:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
OpenWRT ADM Config:
port1 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO
DOWN 10Mbps HD FLOW
PRIO:0 PVID:1 vlan1
RX packets:0
TX packets:0
collisions:0 errors:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
OpenWRT ADM Config:
port2 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO
DOWN 10Mbps HD FLOW
PRIO:0 PVID:2 vlan2
RX packets:0
TX packets:0
collisions:0 errors:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
OpenWRT ADM Config:
port3 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO
DOWN 10Mbps HD FLOW
PRIO:0 PVID:2 vlan2
RX packets:0
TX packets:0
collisions:0 errors:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
OpenWRT ADM Config:
afterburner 1
port4 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO
DOWN 10Mbps HD FLOW
PRIO:0 PVID:2 vlan2
RX packets:0
TX packets:0
collisions:0 errors:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
register_vlan_device: ALREADY had VLAN registered
vconfig: socket or ioctl error for add: Invalid argument
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
vlan2: add 01:00:5e:00:00:01 mcast address to master interface
[235] Jan 01 00:00:20 Running in background
led -> 00
BusyBox v1.00-rc2 (2004.08.14-12:53+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
root@wlanbridge:/# afterburner 0
root@wlanbridge:/#