rendered paste body[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[17179569.184000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f59e0
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f7440
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7b40
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda3 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1808.423 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.284000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.284000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.308000] Memory: 1029624k/1048512k available (1910k kernel code, 18088k reserved, 1070k data, 308k init, 131008k highmem)
[17179569.308000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.388000] Calibrating delay using timer specific routine.. 3620.72 BogoMIPS (lpj=7241450)
[17179569.388000] Security Framework v1.0.0 initialized
[17179569.388000] SELinux: Disabled at boot.
[17179569.388000] Mount-cache hash table entries: 512
[17179569.388000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.388000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.388000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.388000] CPU: L2 Cache: 256K (64 bytes/line)
[17179569.388000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.388000] Checking 'hlt' instruction... OK.
[17179569.404000] SMP alternatives: switching to UP code
[17179569.404000] Freeing SMP alternatives: 16k freed
[17179569.404000] checking if image is initramfs... it is
[17179569.884000] Freeing initrd memory: 5318k freed
[17179569.884000] ACPI: Core revision 20060707
[17179569.892000] ACPI: Looking for DSDT ... not found!
[17179569.904000] CPU0: AMD Sempron(tm) Processor 3100+ stepping 02
[17179569.904000] Total of 1 processors activated (3620.72 BogoMIPS).
[17179569.904000] ENABLING IO-APIC IRQs
[17179569.904000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.052000] Brought up 1 CPUs
[17179570.052000] migration_cost=0
[17179570.052000] NET: Registered protocol family 16
[17179570.052000] EISA bus registered
[17179570.052000] ACPI: bus type pci registered
[17179570.068000] PCI: PCI BIOS revision 2.10 entry at 0xfbe80, last bus=2
[17179570.068000] PCI: Using configuration type 1
[17179570.068000] Setting up standard PCI resources
[17179570.080000] ACPI: Interpreter enabled
[17179570.080000] ACPI: Using IOAPIC for interrupt routing
[17179570.080000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.080000] PCI: Probing PCI hardware (bus 00)
[17179570.084000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:08.0
[17179570.084000] Boot video device is 0000:01:00.0
[17179570.084000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.144000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.144000] ACPI: Power Resource [ISAV] (on)
[17179570.144000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179570.144000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.144000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.144000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.144000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.144000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[17179570.144000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.148000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.148000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.152000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179570.152000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179570.156000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179570.156000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[17179570.156000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[17179570.156000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179570.156000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179570.156000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179570.160000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.160000] pnp: PnP ACPI init
[17179570.164000] pnp: PnP ACPI: found 13 devices
[17179570.164000] PnPBIOS: Disabled by ACPI PNP
[17179570.164000] PCI: Using ACPI for IRQ routing
[17179570.164000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.200000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179570.200000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179570.200000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179570.200000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179570.200000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[17179570.200000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[17179570.200000] PCI: Bridge: 0000:00:0b.0
[17179570.200000] IO window: disabled.
[17179570.200000] MEM window: e8000000-eaffffff
[17179570.200000] PREFETCH window: d0000000-dfffffff
[17179570.200000] PCI: Bridge: 0000:00:0e.0
[17179570.200000] IO window: a000-afff
[17179570.200000] MEM window: disabled.
[17179570.200000] PREFETCH window: disabled.
[17179570.200000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179570.200000] NET: Registered protocol family 2
[17179570.240000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.240000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.240000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.240000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.240000] TCP reno registered
[17179570.240000] audit: initializing netlink socket (disabled)
[17179570.240000] audit(1162393112.240:1): initialized
[17179570.240000] highmem bounce pool size: 64 pages
[17179570.240000] VFS: Disk quotas dquot_6.5.1
[17179570.240000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.240000] Initializing Cryptographic API
[17179570.240000] io scheduler noop registered
[17179570.240000] io scheduler anticipatory registered
[17179570.240000] io scheduler deadline registered
[17179570.240000] io scheduler cfq registered (default)
[17179570.240000] isapnp: Scanning for PnP cards...
[17179570.596000] isapnp: No Plug & Play device found
[17179570.616000] Real Time Clock Driver v1.12ac
[17179570.616000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.616000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.616000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.616000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.616000] mice: PS/2 mouse device common for all mice
[17179570.616000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.616000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.616000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.616000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179570.616000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179570.620000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.620000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.620000] EISA: Probing bus 0 at eisa.0
[17179570.620000] Cannot allocate resource for EISA slot 4
[17179570.620000] EISA: Detected 0 cards.
[17179570.620000] TCP bic registered
[17179570.620000] NET: Registered protocol family 1
[17179570.620000] NET: Registered protocol family 8
[17179570.620000] NET: Registered protocol family 20
[17179570.620000] Using IPI No-Shortcut mode
[17179570.620000] ACPI: (supports S0 S1 S4 S5)
[17179570.620000] Freeing unused kernel memory: 308k freed
[17179570.832000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.808000] Capability LSM initialized
[17179571.844000] ACPI: Fan [FAN] (on)
[17179571.848000] ACPI: Thermal Zone [THRM] (22 C)
[17179572.360000] SCSI subsystem initialized
[17179572.364000] libata version 1.20 loaded.
[17179572.368000] sata_nv 0000:00:0a.0: version 0.8
[17179572.368000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[17179572.368000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 177
[17179572.368000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179572.368000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 177
[17179572.368000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 177
[17179572.572000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179572.736000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:407f
[17179572.736000] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
[17179572.736000] nv_sata: Primary device added
[17179572.736000] nv_sata: Primary device removed
[17179572.736000] nv_sata: Secondary device removed
[17179572.744000] ata1: dev 0 configured for UDMA/133
[17179572.744000] scsi0 : sata_nv
[17179572.948000] ata2: SATA link down (SStatus 0)
[17179572.948000] scsi1 : sata_nv
[17179572.948000] Vendor: ATA Model: WDC WD1600JS-22M Rev: 02.0
[17179572.948000] Type: Direct-Access ANSI SCSI revision: 05
[17179572.948000] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[17179572.948000] NFORCE3-250: chipset revision 162
[17179572.948000] NFORCE3-250: not 100% native mode: will probe irqs later
[17179572.948000] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[17179572.948000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179572.948000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179572.948000] Probing IDE interface ide0...
[17179572.964000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179572.964000] sda: Write Protect is off
[17179572.964000] sda: Mode Sense: 00 3a 00 00
[17179572.964000] SCSI device sda: drive cache: write back
[17179572.964000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179572.964000] sda: Write Protect is off
[17179572.964000] sda: Mode Sense: 00 3a 00 00
[17179572.964000] SCSI device sda: drive cache: write back
[17179572.964000] sda: sda1 sda2 sda3 sda4
[17179573.000000] sd 0:0:0:0: Attached scsi disk sda
[17179573.684000] hda: Memorex 52MAXX 2452AJ, ATAPI CD/DVD-ROM drive
[17179574.468000] hdb: HL-DT-STDVDRRW GWA-4164B, ATAPI CD/DVD-ROM drive
[17179574.524000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.532000] Probing IDE interface ide1...
[17179575.116000] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.116000] Uniform CD-ROM driver Revision: 3.20
[17179575.160000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.996000] Probing IDE interface ide1...
[17179576.036000] usbcore: registered new driver usbfs
[17179576.036000] usbcore: registered new driver hub
[17179576.040000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.040000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179576.040000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
[17179576.040000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.040000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179576.040000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179576.076000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179576.116000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xeb004000
[17179576.172000] usb usb1: configuration #1 chosen from 1 choice
[17179576.172000] hub 1-0:1.0: USB hub found
[17179576.172000] hub 1-0:1.0: 4 ports detected
[17179576.276000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179576.276000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
[17179576.276000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179576.276000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179576.276000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179576.292000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xeb005000
[17179576.348000] usb usb2: configuration #1 chosen from 1 choice
[17179576.348000] hub 2-0:1.0: USB hub found
[17179576.348000] hub 2-0:1.0: 4 ports detected
[17179576.452000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[17179576.452000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 201
[17179576.452000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179576.580000] usb 1-4: new full speed USB device using ohci_hcd and address 2
[17179576.796000] usb 1-4: configuration #1 chosen from 1 choice
[17179576.972000] eth0: forcedeth.c: subsystem: 01695:100c bound to 0000:00:05.0
[17179577.100000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[17179577.312000] usb 2-1: configuration #1 chosen from 1 choice
[17179577.316000] usbcore: registered new driver libusual
[17179577.316000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[17179577.316000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 23 (level, high) -> IRQ 177
[17179577.316000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179577.316000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179577.316000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179577.316000] ehci_hcd 0000:00:02.2: debug port 1
[17179577.316000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179577.316000] ehci_hcd 0000:00:02.2: irq 177, io mem 0xeb000000
[17179577.316000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.316000] usb usb3: configuration #1 chosen from 1 choice
[17179577.320000] hub 3-0:1.0: USB hub found
[17179577.320000] hub 3-0:1.0: 8 ports detected
[17179577.332000] Initializing USB Mass Storage driver...
[17179577.332000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179577.332000] usb-storage: device found at 2
[17179577.332000] usb-storage: waiting for device to settle before scanning
[17179577.792000] usb 2-1: USB disconnect, address 2
[17179577.792000] usbcore: registered new driver usb-storage
[17179577.792000] USB Mass Storage support registered.
[17179577.792000] usbcore: registered new driver hiddev
[17179578.096000] usb 2-1: new low speed USB device using ohci_hcd and address 3
[17179578.308000] usb 2-1: configuration #1 chosen from 1 choice
[17179578.312000] usb 1-4: USB disconnect, address 2
[17179578.320000] input: Logitech USB Trackball as /class/input/input1
[17179578.320000] input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:02.1-1
[17179578.320000] usbcore: registered new driver usbhid
[17179578.320000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179578.376000] Attempting manual resume
[17179578.392000] kjournald starting. Commit interval 5 seconds
[17179578.392000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.616000] usb 1-4: new full speed USB device using ohci_hcd and address 3
[17179578.828000] usb 1-4: configuration #1 chosen from 1 choice
[17179578.832000] scsi3 : SCSI emulation for USB Mass Storage devices
[17179578.832000] usb-storage: device found at 3
[17179578.832000] usb-storage: waiting for device to settle before scanning
[17179583.832000] usb-storage: device scan complete
[17179583.840000] Vendor: Generic Model: USB SD Reader Rev: 1.00
[17179583.840000] Type: Direct-Access ANSI SCSI revision: 00
[17179583.844000] Vendor: Generic Model: USB CF Reader Rev: 1.01
[17179583.844000] Type: Direct-Access ANSI SCSI revision: 00
[17179583.852000] Vendor: Generic Model: USB SM Reader Rev: 1.02
[17179583.852000] Type: Direct-Access ANSI SCSI revision: 00
[17179583.860000] Vendor: Generic Model: USB MS Reader Rev: 1.03
[17179583.860000] Type: Direct-Access ANSI SCSI revision: 00
[17179583.932000] sd 3:0:0:0: Attached scsi removable disk sdb
[17179584.000000] sd 3:0:0:1: Attached scsi removable disk sdc
[17179584.072000] sd 3:0:0:2: Attached scsi removable disk sdd
[17179584.144000] sd 3:0:0:3: Attached scsi removable disk sde
[17179585.852000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179585.864000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179585.892000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[17179585.892000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[17179586.372000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.372000] agpgart: Detected AGP bridge 0
[17179586.372000] agpgart: Setting up Nforce3 AGP.
[17179586.376000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179586.380000] input: PC Speaker as /class/input/input2
[17179586.600000] Floppy drive(s): fd0 is 1.44M
[17179586.620000] irda_init()
[17179586.620000] NET: Registered protocol family 23
[17179586.620000] FDC 0 is a post-1991 82077
[17179587.036000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[17179587.036000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 185
[17179587.036000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179587.080000] parport: PnPBIOS parport detected.
[17179587.080000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179587.104000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179587.104000] sd 3:0:0:0: Attached scsi generic sg1 type 0
[17179587.104000] sd 3:0:0:1: Attached scsi generic sg2 type 0
[17179587.104000] sd 3:0:0:2: Attached scsi generic sg3 type 0
[17179587.104000] sd 3:0:0:3: Attached scsi generic sg4 type 0
[17179587.236000] ts: Compaq touchscreen protocol output
[17179587.356000] intel8x0_measure_ac97_clock: measured 54770 usecs
[17179587.356000] intel8x0: clocking to 46946
[17179587.356000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179587.356000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 209
[17179587.356000] Model 100a Rev 00000000 Serial 100a1102
[17179587.580000] lp0: using parport0 (interrupt-driven).
[17179587.616000] Adding 200804k swap on /dev/disk/by-uuid/de5b2978-5a7f-4916-a46b-9907999e091c. Priority:-1 extents:1 across:200804k
[17179587.700000] EXT3 FS on sda3, internal journal
[17179587.768000] NET: Registered protocol family 17
[17179588.848000] NET: Registered protocol family 10
[17179588.848000] lo: Disabled Privacy Extensions
[17179588.848000] IPv6 over IPv4 tunneling driver
[17179596.128000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179596.188000] NTFS volume version 3.1.
[17179596.268000] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[17179598.612000] ReiserFS: sda2: using ordered data mode
[17179598.628000] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179598.628000] ReiserFS: sda2: checking transaction log (sda2)
[17179598.672000] ReiserFS: sda2: Using r5 hash to sort names
[17179599.136000] eth0: no IPv6 routers present
CPU0
0: 249398 IO-APIC-edge timer
1: 1807 IO-APIC-edge i8042
7: 1 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
14: 11363 IO-APIC-edge ide0
177: 7672 IO-APIC-level libata, ehci_hcd:usb3
185: 60882 IO-APIC-level ohci_hcd:usb1, NVidia CK8S
193: 22652 IO-APIC-level ohci_hcd:usb2
201: 101907 IO-APIC-level eth0
209: 0 IO-APIC-level snd_ca0106
NMI: 0
LOC: 249231
ERR: 0
MIS: 0