rendered paste body[ 0.000000] Bootdata ok (command line is root=/dev/hda6 ro quiet splash)
[ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[ 0.000000] BIOS-e820: 000000001fea0000 - 000000001feae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feae000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6da0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001fea81c2
[ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x000000001feade20
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001feade94
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000001feadf6a
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000001feadfc4
[ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001fea0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001fea0000
[ 0.000000] On node 0 totalpages: 127481
[ 0.000000] DMA zone: 2588 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 124893 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 212000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 1800.070 MHz processor.
[ 10.472999] Console: colour VGA+ 80x25
[ 10.473712] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.474135] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 10.482790] Memory: 503416k/522880k available (2129k kernel code, 19060k reserved, 1424k data, 188k init)
[ 10.561592] Calibrating delay using timer specific routine.. 3603.79 BogoMIPS (lpj=7207592)
[ 10.561660] Security Framework v1.0.0 initialized
[ 10.561668] SELinux: Disabled at boot.
[ 10.561693] Mount-cache hash table entries: 256
[ 10.561882] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 10.561885] CPU: L2 Cache: 1024K (64 bytes/line)
[ 10.561889] CPU 0/0(1) -> Node 0 -> Core 0
[ 10.561907] SMP alternatives: switching to UP code
[ 10.562164] Freeing SMP alternatives: 20k freed
[ 10.562323] checking if image is initramfs... it is
[ 11.103595] Freeing initrd memory: 5643k freed
[ 11.110310] ACPI: Core revision 20060707
[ 11.113347] ACPI: Looking for DSDT in initramfs... found /DSDT.aml ... successfully read 22052 bytes from /DSDT.aml
[ 11.113438] ACPI: Using customized DSDT
[ 11.113510] ACPI (tbget-0289): Table [DSDT] replaced by host OS [20060707]
[ 11.158938] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 11.198916] Using local APIC timer interrupts.
[ 11.254387] result 12500492
[ 11.254389] Detected 12.500 MHz APIC timer.
[ 11.256623] Brought up 1 CPUs
[ 11.256659] testing NMI watchdog ... OK.
[ 11.296685] migration_cost=0
[ 11.296957] NET: Registered protocol family 16
[ 11.296986] ACPI: bus type pci registered
[ 11.296991] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 11.296993] PCI: Not using MMCONFIG.
[ 11.297001] PCI: Using configuration type 1
[ 11.803757] ACPI: Interpreter enabled
[ 11.803760] ACPI: Using IOAPIC for interrupt routing
[ 11.804286] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.804290] PCI: Probing PCI hardware (bus 00)
[ 11.807452] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 11.807859] Boot video device is 0000:01:00.0
[ 11.808729] PCI: Transparent bridge - 0000:00:14.4
[ 11.808806] PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 11.808809] Please report the result to linux-kernel to fix this permanently
[ 11.808846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.813042] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 11.813302] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 11.813562] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 11.813822] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 11.814081] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 11.814340] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 11.814604] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 11.814865] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 11.815446] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode.
[ 12.455252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 12.455479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 12.455852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 12.456290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 12.456948] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.456958] pnp: PnP ACPI init
[ 12.566995] pnp: PnP ACPI: found 10 devices
[ 12.567041] PCI: Using ACPI for IRQ routing
[ 12.567044] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.567051] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 12.567102] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 12.567150] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 12.567197] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 12.567382] PCI-DMA: Disabling IOMMU.
[ 12.567619] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 12.567623] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 12.567627] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 12.567630] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 12.567822] PCI: Bridge: 0000:00:02.0
[ 12.567825] IO window: 9000-9fff
[ 12.567830] MEM window: c0100000-c01fffff
[ 12.567833] PREFETCH window: c8000000-cfffffff
[ 12.567837] PCI: Bridge: 0000:00:06.0
[ 12.567839] IO window: disabled.
[ 12.567841] MEM window: disabled.
[ 12.567844] PREFETCH window: disabled.
[ 12.567847] PCI: Bridge: 0000:00:07.0
[ 12.567848] IO window: disabled.
[ 12.567851] MEM window: disabled.
[ 12.567853] PREFETCH window: disabled.
[ 12.567865] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 12.567867] IO window: 0000a400-0000a4ff
[ 12.567874] IO window: 0000a800-0000a8ff
[ 12.567880] PREFETCH window: 30000000-31ffffff
[ 12.567886] MEM window: 34000000-35ffffff
[ 12.567892] PCI: Bridge: 0000:00:14.4
[ 12.567896] IO window: a000-afff
[ 12.567903] MEM window: c0200000-c02fffff
[ 12.567909] PREFETCH window: 30000000-32ffffff
[ 12.567923] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 12.567931] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 12.567939] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 12.567966] GSI 16 sharing vector 0xB1 and IRQ 16
[ 12.567970] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[ 12.568042] NET: Registered protocol family 2
[ 12.602574] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 12.602731] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 12.603066] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 12.603240] TCP: Hash tables configured (established 16384 bind 8192)
[ 12.603243] TCP reno registered
[ 12.603527] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 12.603910] audit: initializing netlink socket (disabled)
[ 12.603921] audit(1162294577.140:1): initialized
[ 12.604084] VFS: Disk quotas dquot_6.5.1
[ 12.604107] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 12.604165] Initializing Cryptographic API
[ 12.604170] io scheduler noop registered
[ 12.604178] io scheduler anticipatory registered
[ 12.604187] io scheduler deadline registered
[ 12.604204] io scheduler cfq registered (default)
[ 12.605417] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 12.605423] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[ 12.605446] assign_interrupt_mode Found MSI capability
[ 12.605494] Allocate Port Service[0000:00:02.0:pcie00]
[ 12.605536] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 12.605539] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[ 12.605559] assign_interrupt_mode Found MSI capability
[ 12.605587] Allocate Port Service[0000:00:06.0:pcie00]
[ 12.605623] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 12.605626] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
[ 12.605646] assign_interrupt_mode Found MSI capability
[ 12.605674] Allocate Port Service[0000:00:07.0:pcie00]
[ 12.627413] Real Time Clock Driver v1.12ac
[ 12.627455] Linux agpgart interface v0.101 (c) Dave Jones
[ 12.627458] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.627956] GSI 17 sharing vector 0xD9 and IRQ 17
[ 12.627960] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 217
[ 12.627969] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 12.628036] mice: PS/2 mouse device common for all mice
[ 12.628609] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.628841] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 12.628845] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 12.629133] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.629345] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.629400] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.629414] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.629426] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.629439] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.629452] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.629733] TCP bic registered
[ 12.629742] NET: Registered protocol family 1
[ 12.629749] NET: Registered protocol family 8
[ 12.629751] NET: Registered protocol family 20
[ 12.630019] ACPI: (supports S0 S3 S4 S5)
[ 12.630065] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 12.630086] Freeing unused kernel memory: 188k freed
[ 12.684021] vga16fb: initializing
[ 12.684027] vga16fb: mapped to 0xffff8100000a0000
[ 12.818065] Console: switching to colour frame buffer device 80x25
[ 12.818070] fb0: VGA16 VGA frame buffer device
[ 13.243179] input: AT Translated Set 2 keyboard as /class/input/input0
[ 13.859084] Capability LSM initialized
[ 13.891947] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.723434] ACPI: Thermal Zone [TZS0] (41 C)
[ 15.554194] ACPI: Thermal Zone [TZS1] (22 C)
[ 16.384934] ACPI: Thermal Zone [TZSV] (29 C)
[ 16.688929] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 16.688949] GSI 18 sharing vector 0xE1 and IRQ 18
[ 16.688953] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 225
[ 16.688965] ATIIXP: chipset revision 0
[ 16.688968] ATIIXP: not 100% native mode: will probe irqs later
[ 16.688978] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 16.688993] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 16.689001] Probing IDE interface ide0...
[ 16.976384] hda: HTS726060M9AT00, ATA DISK drive
[ 17.647238] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 17.663665] Probing IDE interface ide1...
[ 18.398245] hdc: PIONEER DVD-RW DVR-K04RA, ATAPI CD/DVD-ROM drive
[ 19.068929] ide1 at 0x170-0x177,0x376 on irq 15
[ 19.078076] hda: max request size: 512KiB
[ 19.085806] hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
[ 19.086088] hda: cache flushes supported
[ 19.086132] hda: hda1 hda2 < hda5 hda6 hda7 >
[ 19.184159] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 19.184169] Uniform CD-ROM driver Revision: 3.20
[ 19.646421] usbcore: registered new driver usbfs
[ 19.646446] usbcore: registered new driver hub
[ 19.647211] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 19.647245] GSI 19 sharing vector 0xE9 and IRQ 19
[ 19.647249] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 233
[ 19.647722] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 19.647890] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 19.896192] ohci_hcd 0000:00:13.0: irq 233, io mem 0xc0000000
[ 19.908962] ieee1394: Initialized config rom entry `ip1394'
[ 19.955699] usb usb1: configuration #1 chosen from 1 choice
[ 19.955801] hub 1-0:1.0: USB hub found
[ 19.955816] hub 1-0:1.0: 4 ports detected
[ 20.059462] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 233
[ 20.059825] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 20.060065] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 20.275000] ohci_hcd 0000:00:13.1: irq 233, io mem 0xc0001000
[ 20.335062] usb usb2: configuration #1 chosen from 1 choice
[ 20.335165] hub 2-0:1.0: USB hub found
[ 20.335177] hub 2-0:1.0: 4 ports detected
[ 20.438872] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 233
[ 20.439028] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 20.439271] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 20.439332] ehci_hcd 0000:00:13.2: irq 233, io mem 0xc0002000
[ 20.439345] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.439525] usb usb3: configuration #1 chosen from 1 choice
[ 20.439637] hub 3-0:1.0: USB hub found
[ 20.439646] hub 3-0:1.0: 8 ports detected
[ 20.551326] GSI 20 sharing vector 0x32 and IRQ 20
[ 20.551331] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 50
[ 20.601550] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.688693] Attempting manual resume
[ 20.736677] kjournald starting. Commit interval 5 seconds
[ 20.736688] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.053814] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 21.262523] usb 1-1: configuration #1 chosen from 1 choice
[ 21.868783] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
[ 31.365464] input: PC Speaker as /class/input/input1
[ 31.405280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.420600] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.596162] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 217
[ 31.830856] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 31.830860] sdhci: Copyright(c) Pierre Ossman
[ 31.851532] ieee80211_crypt: registered algorithm 'NULL'
[ 31.854171] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 31.854174] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 31.878358] usbcore: registered new driver hiddev
[ 31.883939] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 31.883989] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
[ 31.883998] usbcore: registered new driver usbhid
[ 31.884001] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 32.110355] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 32.110383] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 177
[ 32.110943] mmc0: SDHCI at 0xc0209000 irq 177 DMA
[ 32.111197] mmc1: SDHCI at 0xc0208c00 irq 177 DMA
[ 32.111432] mmc2: SDHCI at 0xc0208800 irq 177 DMA
[ 32.112861] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 32.144375] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 32.146569] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 32.182658] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 217
[ 32.293016] MC'97 1 converters and GPIO not ready (0xff00)
[ 32.293745] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 177
[ 32.293854] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 32.293880] GSI 21 sharing vector 0xA9 and IRQ 21
[ 32.293883] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 169
[ 32.294055] eth0: Identified chip type is 'RTL8169s/8110s'.
[ 32.294060] eth0: RTL8169 at 0xffffc2000009a400, 00:0a:e4:e0:79:66, IRQ 169
[ 32.323992] bcm43xx driver
[ 32.324087] GSI 22 sharing vector 0x3A and IRQ 22
[ 32.324092] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 58
[ 32.367853] ts: Compaq touchscreen protocol output
[ 32.595680] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 32.605375] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 32.607639] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 177
[ 32.607653] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 32.607680] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 32.607682] Yenta: Routing CardBus interrupts to PCI
[ 32.607689] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 32.718816] r8169: eth0: link down
[ 32.840830] Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
[ 32.840836] Socket status: 30000006
[ 32.840839] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[ 32.840846] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 32.840850] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 32.840854] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
[ 33.369286] lp: driver loaded but no devices found
[ 33.441710] SCSI subsystem initialized
[ 33.451285] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 33.451289] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 33.488900] Adding 995988k swap on /dev/disk/by-uuid/455e7b34-aa1c-4f4b-b0c6-f8714db078fc. Priority:-1 extents:1 across:995988k
[ 33.595847] EXT3 FS on hda6, internal journal
[ 33.699344] NET: Registered protocol family 17
[ 33.852207] r8169: eth0: link up
[ 33.905568] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 33.970640] NTFS volume version 3.1.
[ 34.012860] NTFS volume version 3.1.