rendered paste body
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar family
Device Model: WDC WD800BB-00JHC0
Serial Number: WD-WMAM9J528796
Firmware Version: 05.01C05
User Capacity: 80.026.361.856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Oct 28 12:51:24 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 35) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 3
3 Spin_Up_Time 0x0003 169 162 021 Pre-fail Always - 2550
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 504
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6124
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 499
194 Temperature_Celsius 0x0022 115 098 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 734 hours (30 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c5 d1 08 bf 14 e7 01 58 10:51:53.425 WRITE MULTIPLE
c4 d1 80 ff 25 e5 07 58 10:51:51.510 READ MULTIPLE
c5 d1 80 cf b9 f8 05 58 10:51:51.485 WRITE MULTIPLE
c4 d1 80 e7 fa 37 06 58 10:51:51.450 READ MULTIPLE
c5 d1 80 4f b9 f8 05 58 10:51:51.420 WRITE MULTIPLE
Error 2 occurred at disk power-on lifetime: 733 hours (30 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c5 d1 80 4f 34 5f 00 58 09:38:41.295 WRITE MULTIPLE
c4 d1 80 ff 25 e5 07 58 09:38:39.080 READ MULTIPLE
c5 d1 80 e7 fa 37 06 58 09:38:39.055 WRITE MULTIPLE
c4 d1 80 9f 0e 31 09 58 09:38:39.020 READ MULTIPLE
c5 d1 80 67 fa 37 06 58 09:38:38.995 WRITE MULTIPLE
Error 1 occurred at disk power-on lifetime: 732 hours (30 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c5 d1 08 e7 3c 24 00 58 08:57:31.210 WRITE MULTIPLE
c4 d1 80 ff 25 e5 07 58 08:57:29.295 READ MULTIPLE
c5 d1 80 9f 0e 31 09 58 08:57:29.265 WRITE MULTIPLE
c4 d1 80 7f 25 e5 07 58 08:57:29.225 READ MULTIPLE
c5 d1 80 1f 0e 31 09 58 08:57:29.195 WRITE MULTIPLE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5309 -
# 2 Extended offline Completed without error 00% 4277 -
# 3 Extended offline Aborted by host 90% 4276 -
# 4 Extended offline Aborted by host 90% 4276 -
# 5 Extended offline Aborted by host 90% 4276 -
# 6 Extended offline Completed without error 00% 4276 -
# 7 Extended offline Completed without error 00% 4276 -
# 8 Extended offline Aborted by host 90% 4275 -
# 9 Extended offline Aborted by host 10% 4275 -
#10 Short offline Completed without error 00% 4275 -
#11 Extended offline Completed without error 00% 3742 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.