help -- displays the commands with a one-line description
help <command>-- displays usage statement for specified command
logout
quit
exit -- logs the user out and then prints a new login prompt
setled -- set the state of the LEDs on a module <NOT SUPPORTED>
getled -- display the LED settings on a module <NOT SUPPORTED>
getsysinfo -- display general RAC and system information
getmodinfo -- get module config and status information
getsensors -- display RAC sensor readings and information <NOT SUPPORTED>
getsensorinfo-- get sensor status for the specified sensors <NOT SUPPORTED>
serveraction -- execute a graceful or hard server reset or power-on/off/cycle
getraclog -- display RAC Log entries
getraclog -i -- display the total number of entries in the RAC Log
gettracelog -- display Trace Log entries
gettracelog -i -- display numbers of entries in the Trace Log
clrraclog -- clear the RAC Log
getsel -- displays SEL entries
getsel -i -- displays the total number of entries in the system event log
clrsel -- clear the SEL
connect -- connect to com1 or com2 serial port text console
racadm -- execute a racadm subcommand
[root]#
[root]# racadm
gethelp -- dump available commands
help -- list racadm subcommand descriptions
help <subcmd>-- list usage statement for specified subcmd
allowEnDisRem -- allow enable or disable remote console <NOT SUPPORTED>
localauthenable -- Local OS authenication Enable or Disable <NOT SUPPORTED>
clearasrscreen -- clear the last ASR screen(last blue screen)
getssninfo -- display information about active sessions
fwupdate -- execute or get status on RAC firmware update
racreset -- reset the RAC
racresetcfg -- reset the RAC to the default configuration
racshutdown -- shutdown the RAC <NOT SUPPORTED>
racdump -- dump RAC status and state information for debug
config -- configure the RAC
getconfig -- display the RAC configuration
coredump -- display the last RAC coredump
coredumpdelete -- delete the coredump stored in the RAC
setmnfgcfg -- set manufacturing config mode <NOT SUPPORTED>
getmnfgcfg -- display manufacturing config mode <NOT SUPPORTED>
setractime -- set the time on the Remote Access Controller <NOT SUPPORTED>
getractime -- display the time from the Remote Access Controller
setled -- set the state of the LEDs on a module <NOT SUPPORTED>
getled -- display the LED settings on a module <NOT SUPPORTED>
getsysinfo -- display general RAC and system information
getmodinfo -- get module config and status information
getsensors -- display RAC sensor readings and information <NOT SUPPORTED>
getsensorinfo-- get sensor status for the specified sensors <NOT SUPPORTED>
serveraction -- execute a graceful or hard server reset or power-on/off/cycle
getraclog -- display RAC Log entries
getraclog -i -- display the total number of entries in the RAC Log
gettracelog -- display Trace Log entries
gettracelog -i -- display numbers of entries in the Trace Log
settracelog -- set Trace Log flags
settracelog -s -- display the current Trace Log setting
clrraclog -- clear the RAC Log
getsel -- displays SEL entries
getsel -i -- displays the total number of entries in the system event log
clrsel -- clear the SEL
arp -- display ARP table
ifconfig -- display network interface table
netstat -- display routing table and some network statistics
ping -- send ICMP echo packets
setniccfg -- set the IP configuration
getniccfg -- display the current IP configuration
getsvctag -- display service tags
setsysinfo -- set the chassis name and chassis location <NOT SUPPORTED>
setrac -- set Time, Hostname, Os Name/Type from host-to-RAC <NOT SUPPORTED>
syncvncpassword-- Sync VNC password from RAC to the Host VNC server <NOT SUPPORTED>
testnumpage -- test the RAC numeric paging feature <NOT SUPPORTED>
testalphapage -- test the RAC alpha numeric paging feature <NOT SUPPORTED>
testemail -- test the RAC e-mail feature
testtrap -- test the RAC trap feature
sslcsrgen -- generate a CSR from the RAC or check a CSR status
sslcertupload -- upload a Server or CA certificate on the RAC <NOT SUPPORTED>
sslcertview -- view a Server or CA certificate
sslcertdownload -- download a Server or CA certificate on the RAC <NOT SUPPORTED>