Rroetsytootsy

uda1380_attach:
I2C: Scanning bus (02)(03)(04)(05)(06)(07)(08)(09)(0a)(0b)(0c)(0d)(0e)(0f)(10)(11)(12)(13)(14)(15)(16)(17)(18)(19)(1a)(1b)(1c)(1d)(1e)(1f)(20)(21)(22)(23)(24)(25)(26)(27)(28)(29)(2a)(2b)(2c)(2d)(2e)(2f)(30)(31)(32)(33)(34)(35)(36)(37)(38)(39)(3a)(3b)(3c)(3d)(3e)(3f)(40)(41)(42)(43)(44)(45)(46)(47)(48)(49)(4a)(4b)(4c)(4d)(4e)(4f)(50)(51)(52)(53)(54)(55)(56)(57)(58)(59)(5a)(5b)(5c)(5d)(5e)(5f)(60)(61)(62)(63)(64)(65)(66)(67)(68)(69)(6a)(6b)(6c)(6d)(6e)(6f)(70)(71)(72)(73)(74)(75)(76)(77)(78)(79)(7a)(7b)(7c)(7d)(7e)(7f)
I2C: Successfully added bus
snd_chip_uda1380_mixer_new:
added 5 controls
snd_uda1380_put_single called with private info: 0 (clnt is c3fe0864)
setting 0 to 0
uda1380_update:
snd_card_pxa_uda1380_pcm: creating pcm
snd_card_pxa_uda1380_pcm: buffer prellocation done
pxa_uda1380_audio_init
pxa_uda1380_audio_init: i2s cfg: SACR0 0x8805, SACR1 0x0, SASR0 0x5, SADIV 0xd, SAIMR 0x0
uda1380_command:
uda1380_open:
uda1380_cmd_init:
uda1380_sync:
uda1380_write_reg: writing f02 in 0
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 1
uda1380: write failed, status -121
uda1380_write_reg: writing 25df in 2
uda1380: write failed, status -121
uda1380_write_reg: writing 1f1f in 3
uda1380: write failed, status -121
uda1380_write_reg: writing ffff in 10
uda1380: write failed, status -121
uda1380_write_reg: writing ff00 in 11
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 12
uda1380: write failed, status -121
uda1380_write_reg: writing 4800 in 13
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 14
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 20
uda1380: write failed, status -121
uda1380_write_reg: writing 8000 in 21
uda1380: write failed, status -121
uda1380_write_reg: writing 50c in 22
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 23
uda1380: write failed, status -121
set_samplerate rate: 44100
uda1380_mute: 1
uda1380_write_reg: writing 4800 in 13
uda1380: write failed, status -121
uda1380_command:
uda1380_configure:
uda1380_write_reg: writing f02 in 0
uda1380: write failed, status -121
uda1380_write_reg: writing 0 in 1
uda1380: write failed, status -121
uda1380_mute: 1
uda1380_write_reg: writing 4800 in 13
uda1380: write failed, status -121
set sample rate done
uda1380_mute: 0
uda1380_write_reg: writing 800 in 13
uda1380: write failed, status -121
pxa_uda1380_audio_init done
audio_dma_request
audio_dma_request playback
drcmr playback: f200010c set to 88
audio_dma_request done
audio_dma_request
audio_dma_request capture
drcmr capture: f2000108 set to 89
audio_dma_request done
Audio support initialized