rendered paste body[ 0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash)
[ 0.000000] Linux version 2.6.18 (root@morpheus) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Thu Oct 5 22:47:57 EEST 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
[ 0.000000] BIOS-e820: 000000001def0000 - 000000001def3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001def3000 - 000000001df00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001e000000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f74e0
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001def3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001def30c0
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001defb240
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001defb180
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] On node 0 totalpages: 119667
[ 0.000000] DMA zone: 2775 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 116892 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
[ 0.000000] Built 1 zonelists. Total pages: 119667
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 1603.375 MHz processor.
[ 17.154926] Console: colour VGA+ 80x25
[ 17.155318] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.155928] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 17.155996] Checking aperture...
[ 17.156000] CPU 0: aperture @ 1042000000 size 32 MB
[ 17.156003] Aperture too small (32 MB)
[ 17.163013] No AGP bridge found
[ 17.168864] Memory: 471360k/490432k available (2844k kernel code, 18260k reserved, 1087k data, 188k init)
[ 17.245854] Calibrating delay using timer specific routine.. 3209.79 BogoMIPS (lpj=6419581)
[ 17.245889] Security Framework v1.0.0 initialized
[ 17.245897] SELinux: Disabled at boot.
[ 17.245909] Mount-cache hash table entries: 256
[ 17.246017] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.246020] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.246038] CPU: AMD Sempron(tm) Processor 3000+ stepping 02
[ 17.246049] ACPI: Core revision 20060707
[ 17.295018] Using local APIC timer interrupts.
[ 17.357327] result 12526383
[ 17.357329] Detected 12.526 MHz APIC timer.
[ 17.357750] testing NMI watchdog ... OK.
[ 17.397841] checking if image is initramfs... it is
[ 17.973109] Freeing initrd memory: 6056k freed
[ 17.977959] NET: Registered protocol family 16
[ 17.978040] ACPI: bus type pci registered
[ 17.981713] PCI: Using MMCONFIG at f0000000
[ 17.981744] PCI: No mmconfig possible on device 0:18
[ 17.991462] ACPI: Interpreter enabled
[ 17.991467] ACPI: Using IOAPIC for interrupt routing
[ 17.992197] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.992201] PCI: Probing PCI hardware (bus 00)
[ 18.000589] Boot video device is 0000:00:05.0
[ 18.001444] PCI: Transparent bridge - 0000:00:10.0
[ 18.001475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.181431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 18.184007] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 18.184461] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.184912] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.185376] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[ 18.185825] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.186272] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.186720] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 18.187171] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.187620] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 18.188067] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.188519] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 18.188979] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.189432] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 18.189881] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.190333] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.190783] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 18.191231] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 18.191679] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 18.192129] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 18.192578] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 18.193137] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 18.193681] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 18.194219] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 18.194754] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 18.195290] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 18.195826] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 18.196363] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 18.196899] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 18.197489] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 18.198027] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 18.198563] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 18.199099] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 18.199639] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 18.200176] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 18.200713] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 18.201307] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 18.201847] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 18.202383] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 18.202921] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 18.203458] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 18.203995] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 18.209697] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.209713] pnp: PnP ACPI init
[ 18.221396] pnp: PnP ACPI: found 17 devices
[ 18.221493] PCI: Using ACPI for IRQ routing
[ 18.221499] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.221619] PCI-DMA: Disabling IOMMU.
[ 18.222269] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 18.222273] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 18.222276] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 18.222280] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 18.222283] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 18.222286] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 18.222290] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[ 18.222293] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[ 18.222530] PCI: Bridge: 0000:00:02.0
[ 18.222532] IO window: d000-dfff
[ 18.222536] MEM window: fd800000-fd8fffff
[ 18.222539] PREFETCH window: fd700000-fd7fffff
[ 18.222542] PCI: Bridge: 0000:00:03.0
[ 18.222544] IO window: b000-bfff
[ 18.222547] MEM window: fde00000-fdefffff
[ 18.222550] PREFETCH window: fdd00000-fddfffff
[ 18.222553] PCI: Bridge: 0000:00:04.0
[ 18.222555] IO window: e000-efff
[ 18.222558] MEM window: fdc00000-fdcfffff
[ 18.222561] PREFETCH window: fd900000-fd9fffff
[ 18.222565] PCI: Bridge: 0000:00:10.0
[ 18.222567] IO window: c000-cfff
[ 18.222571] MEM window: fdb00000-fdbfffff
[ 18.222575] PREFETCH window: fda00000-fdafffff
[ 18.222585] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 18.222591] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.222596] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.222603] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 18.222625] NET: Registered protocol family 2
[ 18.256901] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 18.257001] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 18.257093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 18.257141] TCP: Hash tables configured (established 16384 bind 8192)
[ 18.257144] TCP reno registered
[ 18.258443] audit: initializing netlink socket (disabled)
[ 18.258459] audit(1161857132.052:1): initialized
[ 18.258575] VFS: Disk quotas dquot_6.5.1
[ 18.258594] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 18.258633] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 18.258722] SGI XFS Quota Management subsystem
[ 18.258750] Initializing Cryptographic API
[ 18.258754] io scheduler noop registered
[ 18.258759] io scheduler anticipatory registered
[ 18.258764] io scheduler deadline registered (default)
[ 18.258776] io scheduler cfq registered
[ 18.273178] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 18.273183] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
[ 18.273197] assign_interrupt_mode Found MSI capability
[ 18.273229] Allocate Port Service[0000:00:02.0:pcie00]
[ 18.273263] Allocate Port Service[0000:00:02.0:pcie03]
[ 18.273295] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.273299] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
[ 18.273313] assign_interrupt_mode Found MSI capability
[ 18.273326] Allocate Port Service[0000:00:03.0:pcie00]
[ 18.273355] Allocate Port Service[0000:00:03.0:pcie03]
[ 18.273384] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.273387] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
[ 18.273401] assign_interrupt_mode Found MSI capability
[ 18.273415] Allocate Port Service[0000:00:04.0:pcie00]
[ 18.273440] Allocate Port Service[0000:00:04.0:pcie03]
[ 18.302424] Real Time Clock Driver v1.12ac
[ 18.302467] Linux agpgart interface v0.101 (c) Dave Jones
[ 18.302470] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.302594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.302866] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.303577] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.303941] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.304665] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.304870] Linux video capture interface: v2.00
[ 18.304914] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 18.305003] saa7146: register extension 'budget dvb'.
[ 18.305028] saa7146: register extension 'budget_ci dvb'.
[ 18.305661] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 18.305668] GSI 16 sharing vector 0xC9 and IRQ 16
[ 18.305676] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201
[ 18.305708] saa7146: found saa7146 @ mem ffffc2000000e000 (revision 1, irq 201) (0x13c2,0x1010).
[ 18.305716] saa7146 (0): dma buffer size 192512
[ 18.305719] DVB: registering new adapter (TT-Budget-C-CI PCI).
[ 18.341688] adapter has MAC addr = 00:d0:5c:04:78:cd
[ 18.341943] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input0
[ 18.342008] budget_ci: CI interface initialised
[ 18.342206] DVB: registering frontend 0 (ST STV0297 DVB-C)...
[ 18.342250] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.342254] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 18.342447] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.342629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.342642] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.342758] mice: PS/2 mouse device common for all mice
[ 18.342786] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 18.342874] ALSA device list:
[ 18.342876] No soundcards found.
[ 18.342950] TCP bic registered
[ 18.342956] NET: Registered protocol family 1
[ 18.342965] NET: Registered protocol family 8
[ 18.342967] NET: Registered protocol family 20
[ 18.343051] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.343137] Freeing unused kernel memory: 188k freed
[ 18.362062] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.385368] vga16fb: initializing
[ 18.385373] vga16fb: mapped to 0xffff8100000a0000
[ 18.385418] fb0: VGA16 VGA frame buffer device
[ 19.611055] ACPI: Fan [FAN] (on)
[ 19.614063] ACPI: Getting cpuindex for acpiid 0x1
[ 19.615727] ACPI: Thermal Zone [THRM] (40 C)
[ 19.892845] Probing IDE interface ide0...
[ 20.329747] SCSI subsystem initialized
[ 20.334281] libata version 2.00 loaded.
[ 20.335728] sata_nv 0000:00:0e.0: version 2.0
[ 20.336336] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 20.336342] GSI 17 sharing vector 0xD1 and IRQ 17
[ 20.336350] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209
[ 20.336422] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 20.336490] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF800 irq 209
[ 20.336513] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF808 irq 209
[ 20.336530] scsi0 : sata_nv
[ 20.381606] usbcore: registered new driver usbfs
[ 20.381630] usbcore: registered new driver hub
[ 20.382378] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 20.437761] ieee1394: Initialized config rom entry `ip1394'
[ 20.448386] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
[ 20.458714] Probing IDE interface ide1...
[ 20.802369] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.802942] ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/1)
[ 20.802946] ata1.00: ata1: dev 0 multi count 1
[ 20.803586] ata1.00: configured for UDMA/133
[ 20.803597] scsi1 : sata_nv
[ 21.114044] ata2: SATA link down (SStatus 0 SControl 300)
[ 21.124561] ATA: abnormal status 0x7F on port 0x977
[ 21.124667] Vendor: ATA Model: WDC WD1200BEVS-0 Rev: 01.0
[ 21.124675] Type: Direct-Access ANSI SCSI revision: 05
[ 21.125525] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 21.125532] GSI 18 sharing vector 0xD9 and IRQ 18
[ 21.125539] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 217
[ 21.125616] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 21.125675] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF300 irq 217
[ 21.125699] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF308 irq 217
[ 21.125716] scsi2 : sata_nv
[ 21.433727] ata3: SATA link down (SStatus 0 SControl 300)
[ 21.444240] ATA: abnormal status 0x7F on port 0x9E7
[ 21.444254] scsi3 : sata_nv
[ 21.753411] ata4: SATA link down (SStatus 0 SControl 300)
[ 21.763924] ATA: abnormal status 0x7F on port 0x967
[ 21.766050] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 21.766075] NFORCE-MCP51: chipset revision 161
[ 21.766077] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 21.766084] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 21.766095] ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA
[ 21.766106] ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA
[ 21.766114] Probing IDE interface ide0...
[ 22.336839] Probing IDE interface ide1...
[ 22.905244] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 22.905252] GSI 19 sharing vector 0xE1 and IRQ 19
[ 22.905259] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 225
[ 22.905329] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 22.905335] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 22.905938] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 22.905963] ohci_hcd 0000:00:0b.0: irq 225, io mem 0xfe02f000
[ 22.962494] usb usb1: configuration #1 chosen from 1 choice
[ 22.962587] hub 1-0:1.0: USB hub found
[ 22.962597] hub 1-0:1.0: 8 ports detected
[ 23.065035] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 23.065043] GSI 20 sharing vector 0xE9 and IRQ 20
[ 23.065051] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 233
[ 23.065122] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 23.065128] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 23.065320] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 23.065354] ehci_hcd 0000:00:0b.1: debug port 1
[ 23.065358] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 23.065372] ehci_hcd 0000:00:0b.1: irq 233, io mem 0xfe02e000
[ 23.065380] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.065609] usb usb2: configuration #1 chosen from 1 choice
[ 23.065707] hub 2-0:1.0: USB hub found
[ 23.065715] hub 2-0:1.0: 8 ports detected
[ 23.168842] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 23.168850] GSI 21 sharing vector 0x32 and IRQ 21
[ 23.168857] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50
[ 23.219061] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 23.219785] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 23.219789] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 209
[ 23.219796] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 23.219806] forcedeth: using HIGHDMA
[ 23.739820] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
[ 23.750551] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 23.750563] sda: Write Protect is off
[ 23.750565] sda: Mode Sense: 00 3a 00 00
[ 23.750577] SCSI device sda: drive cache: write back
[ 23.750636] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 23.750644] sda: Write Protect is off
[ 23.750646] sda: Mode Sense: 00 3a 00 00
[ 23.750657] SCSI device sda: drive cache: write back
[ 23.750661] sda: sda1 sda2 sda3 < sda5 >
[ 23.823217] sd 0:0:0:0: Attached scsi disk sda
[ 24.165200] Attempting manual resume
[ 24.188824] kjournald starting. Commit interval 5 seconds
[ 24.188836] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.486901] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c1e981]
[ 29.455945] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.565817] parport: PnPBIOS parport detected.
[ 29.565849] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 29.661954] lp0: using parport0 (interrupt-driven).
[ 29.835199] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 29.835204] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 29.882730] logips2pp: Detected unknown logitech mouse model 127
[ 30.103241] Adding 1461904k swap on /dev/sda2. Priority:-1 extents:1 across:1461904k
[ 30.343783] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[ 30.408784] EXT3 FS on sda1, internal journal
[ 31.147862] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 31.147867] md: bitmap version 4.39
[ 31.149618] NET: Registered protocol family 17
[ 32.620586] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
[ 33.404407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.407377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.435634] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00
[ 33.435656] i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40
[ 34.146099] input: PC Speaker as /class/input/input3
[ 34.304812] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 34.304817] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 217
[ 34.304892] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 34.642664] Floppy drive(s): fd0 is 1.44M
[ 34.660301] FDC 0 is a post-1991 82077
[ 34.983406] ts: Compaq touchscreen protocol output
[ 38.662137] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.662143] device-mapper: ioctl: error adding target to table
[ 38.664187] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.664192] device-mapper: ioctl: error adding target to table
[ 38.665809] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.665815] device-mapper: ioctl: error adding target to table
[ 38.666428] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.666433] device-mapper: ioctl: error adding target to table
[ 38.666936] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.666940] device-mapper: ioctl: error adding target to table
[ 38.667408] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.667412] device-mapper: ioctl: error adding target to table
[ 38.667910] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.667915] device-mapper: ioctl: error adding target to table
[ 38.668359] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.668363] device-mapper: ioctl: error adding target to table
[ 38.668888] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.668893] device-mapper: ioctl: error adding target to table
[ 38.669363] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.669367] device-mapper: ioctl: error adding target to table
[ 38.669836] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.669841] device-mapper: ioctl: error adding target to table
[ 38.670331] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 38.670335] device-mapper: ioctl: error adding target to table
[ 38.948564] XFS mounting filesystem sda5
[ 39.151464] Ending clean XFS mount for filesystem: sda5
[ 41.567980] ACPI: Power Button (FF) [PWRF]
[ 41.567993] ACPI: Power Button (CM) [PWRB]
[ 41.591266] Using specific hotkey driver
[ 41.638103] ibm_acpi: ec object not found
[ 41.684107] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 42.015251] powernow-k8: Power state transitions not supported
[ 43.180464] ppdev: user-space parallel port driver
[ 43.388944] NET: Registered protocol family 10
[ 43.389030] lo: Disabled Privacy Extensions
[ 43.389378] IPv6 over IPv4 tunneling driver
[ 50.968853] Bluetooth: Core ver 2.10
[ 50.968913] NET: Registered protocol family 31
[ 50.968915] Bluetooth: HCI device and connection manager initialized
[ 50.968919] Bluetooth: HCI socket layer initialized
[ 51.001588] Bluetooth: L2CAP ver 2.8
[ 51.001592] Bluetooth: L2CAP socket layer initialized
[ 51.004752] Bluetooth: RFCOMM socket layer initialized
[ 51.004772] Bluetooth: RFCOMM TTY layer initialized
[ 51.004774] Bluetooth: RFCOMM ver 1.8
[ 54.229358] eth0: no IPv6 routers present
[ 778.552082] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[ 2105.840333] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 8293.769634] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 8338.677379] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 9439.349118] dvb_ca adapter 0: CAM tried to send a buffer larger than the link buffer size (65535 > 16)!
[ 9439.580624] dvb_ca adapter 0: CAM tried to send a buffer larger than the ecount size!
[ 9439.580631] dvb_ca adapter 0: DVB CAM link initialisation failed :(
[ 9449.582304] dvb_ca adaptor 0: PC card did not respond :(
[ 9463.376332] dvb_ca adaptor 0: PC card did not respond :(
[ 9527.377963] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 9882.957576] dvb_ca adapter 0: DVB CAM detected and initialised successfully